[BRLTTY] Baum nlt included.

Sun Feb 14 14:32:55 EST 2010

Hello!
I have braille output if i start it manually with these parameters.
But not when starting windows as excpected.
Here is the brltty.conf.
ntire file.
I do paste in the et
# This is a configuration file template for the BRLTTY application.
# Uncomment those entries which apply to your personal needs and system
# requirements.

# BRLTTY expects to find its configuration file in "//etc/brltty.conf"
# (can be overridden with the -f [--configuration-file=] option).
# If it doesn't exist, then BRLTTY silently continues but may require
# that certain command line options be explicitly supplied.

# Blank lines are ignored. The character '#', anywhere on a line,
# initiates a comment; all characters from it to the end of that line
# are ignored.

# Each configuration entry consists of a keyword followed by its operand.
# An arbitrary amount of white space, (blanks and/or tabs), may occur
# before the keyword, as well as before and after the operand. Keyword
# processing is not case sensitive. Examples of valid entries are:
#
# Braille-Driver pm # Papenmeier braille displays.
# braille-device serial:COM1 # The first serial device.
# SPEECH-DRIVER fv # The Festival Text to Speech System.

# The default settings given within the following descriptions assume no
# special build options (see "./configure --help" in the top-level
# directory of the source tree.

############################
# Generic Braille Settings #
############################

# The braille-driver directive specifies the two-letter driver
# identification code of the driver for the braille display.
# If not specified, autodetection will be performed.
# (can be overridden with the -b [--braille-driver=] option)
#braille-driver auto # autodetect
#braille-driver al # Alva
#braille-driver at # Albatross
#braille-driver ba # BrlAPI
#braille-driver bd # Braudi
#braille-driver bl # BrailleLite
braille-driver bm # Baum
#braille-driver bn # BrailleNote
#braille-driver cb # CombiBraille
#braille-driver ec # EcoBraille
#braille-driver eu # EuroBraille
#braille-driver fs # FreedomScientific
#braille-driver hm # HIMS
#braille-driver ht # HandyTech
#braille-driver il # IrisLinux
#braille-driver lb # Libbraille
#braille-driver lt # LogText
#braille-driver mb # MultiBraille
#braille-driver md # MDV (protocol 5)
#braille-driver mn # MiniBraille
#braille-driver pg # Pegasus
#braille-driver pm # Papenmeier
#braille-driver sk # Seika
#braille-driver tn # TechniBraille
#braille-driver ts # TSI
#braille-driver tt # TTY
#braille-driver vd # VideoBraille
#braille-driver vo # Voyager
#braille-driver vr # Virtual
#braille-driver vs # VisioBraille
#braille-driver xw # XWindow

# The braille-device directive specifies the device to which the braille
# display is connected. The generic syntax is type:device. The device
# type is optional, and, for backward compatibility, defaults to serial.
# The following devices are supported (brackets indicate optionality):
#    serial:path (relative paths are anchored at "/dev")
#    usb:[serial-number]
#    bluetooth:address
# If not specified, "usb:" will be used.
# (can be overridden with the -d [--braille-device=] option)
braille-device serial:COM1 # First serial device.
#braille-device usb:  # First USB device matching braille driver.
#braille-device usb:nnnnn # Specific USB device by serial number.
#braille-device bluetooth:xx:xx:xx:xx:xx:xx # Specific bluetooth device by 
address.

# The release-device directive specifies whether or not the device to which 
the
# braille display is connected is to be released when the current screen or
# window can't be read by BRLTTY. If not specified, "on" will be used on 
Windows
# platforms and "off" will be used on all other platforms.
# (can be overridden with the -r [--release-device] option)
#release-device on # Release the device.
#release-device off # Don't release the device.

# The text-table directive specifies which text table to use. Relative paths
# are anchored at "//etc/brltty". If not specified, locale-based
# autoselection with fallback to "$(SRC_TOP)$(TBL_DIR)/en-nabcc.ttb" will be 
performed.
# (can be overridden with the -t [--text-table=] option)
#text-table auto # locale-based autoselection (fallback to 
"$(SRC_TOP)$(TBL_DIR)/en-nabcc.ttb")
#text-table ar # Arabic (generic)
#text-table as # Assamese
#text-table awa # Awadhi
#text-table bg # Bulgarian
#text-table bh # Bihari
#text-table bn # Bengali
#text-table bo # Tibetan
#text-table bra # Braj
#text-table cs # Czech
#text-table cy # Welsh
#text-table da # Danish
#text-table de # German
#text-table dra # Dravidian
#text-table el # Greek
#text-table en # English
#text-table en_CA # English (Canada)
#text-table en_UK # English (United Kingdom)
#text-table en_US # English (United States)
#text-table en-nabcc # English (North American Braille Computer Code)
#text-table eo # Esperanto
#text-table es # Spanish
#text-table et # Estonian
#text-table fi # Finnish
#text-table fr # French
#text-table fr_CA # French (Canada)
#text-table fr_FR # French (France)
#text-table fr-2007 # French (unified)
#text-table fr-cbifs # French (Code Braille Informatique Français Standard)
#text-table ga # Irish
#text-table gd # Gaelic
#text-table gon # Gondi
#text-table gu # Gujarati
#text-table he # Hebrew
#text-table hi # Hindi
#text-table hr # Croatian
#text-table hu # Hungarian
#text-table hy # Armenian
#text-table is # Icelandic
#text-table it # Italian
#text-table kha # Khasi
#text-table kn # Kannada
#text-table kok # Konkani
#text-table kru # Kurukh
#text-table lt # Lituanian
#text-table lv # Latvian
#text-table mg # Malagasy
#text-table mi # Maori
#text-table ml # Malayalam
#text-table mni # Manipuri
#text-table mr # Marathi
#text-table mt # Maltese
#text-table mun # Mundari
#text-table mwr # Marwari
#text-table ne # Nepali
#text-table new # Newari
#text-table nl # Dutch
#text-table nl_BE # Dutch (Belgium)
#text-table nl_NL # Dutch (Netherlands)
#text-table no # Norwegian
#text-table no-generic # Norwegian (with support for other languages)
#text-table no-oub # Norwegian (Offentlig Utvalg for Blindeskrift)
#text-table nwc # Old Newari
#text-table or # Oriya
#text-table pa # Panjabi
#text-table pi # Pali
#text-table pl # Polish
#text-table pt # Portuguese
#text-table ro # Romanian
#text-table ru # Russian
#text-table sa # Sanskrit
#text-table sat # Santali
#text-table sd # Sindhi
#text-table sk # Slovak
#text-table sv # Swedish
#text-table sw # Swahili
#text-table ta # Tamil
#text-table te # Telugu
#text-table tr # Turkish
#text-table vi # Vietnamese

# The attributes-table directive specifies which attributes table to use.
# Relative paths are anchored at "//etc/brltty". If not specified,
# "$(SRC_TOP)$(TBL_DIR)/attributes.atb" will be used.
# (can be overridden with the -a [--attributes-table=] option)
#attributes-table attributes #
#attributes-table attrib #

# The contraction-table directive specifies which contraction table to use.
# Relative paths are anchored at "//etc/brltty". If not specified, no
# contraction table will be available.
# (can be overridden with the -c [--contraction-table=] option)
#contraction-table af # Afrikaans (contracted)
#contraction-table am # Amharic (uncontracted)
#contraction-table de-basis # German (uncontracted)
#contraction-table de-kurzschrift # German (contracted - 1998 standard)
#contraction-table de-vollschrift # German (basic contractions)
#contraction-table en-ueb-g2 # Unified English Braille (grade 2)
#contraction-table en-us-g2 # American English (grade 2)
#contraction-table es # Spanish (grade 2)
#contraction-table fr-abrege # French (contracted)
#contraction-table fr-integral # French (uncontracted)
#contraction-table ha # Hausa (contracted)
#contraction-table id # Indonesian (contracted)
#contraction-table ja # Japanese (uncontracted)
#contraction-table ko-g1 # Korean (grade 1)
#contraction-table ko-g2 # Korean (grade 2)
#contraction-table ko # Korean (uncontracted)
#contraction-table mg # Malagasy (contracted)
#contraction-table mun # Munda (contracted)
#contraction-table nl # Dutch (contracted)
#contraction-table ny # Chichewa (contracted)
#contraction-table ipa # International Phonetic Alphabet
#contraction-table pt # Portuguese (grade 2)
#contraction-table si # Sinhalese (uncontracted)
#contraction-table sw # Swahili (contracted)
#contraction-table th # Thai (contracted)
#contraction-table zh-tw # Taiwanese Chinese (uncontracted)
#contraction-table zh-tw-ucb # Taiwanese Chinese (Unique Chinese Braille)
#contraction-table zu # Zulu (contracted)

#############################
# Braille Driver Parameters #
#############################

# The braille-parameters directive passes non-generic parameters through
# to the braille driver.
# (can be overridden with the -B [--braille-parameters=] option)
#braille-parameters driver:parameter=setting,...

# BrlAPI Braille Driver Parameters
#braille-parameters ba:Auth=//etc/brlapi.key
#braille-parameters ba:Host=:0

# BrailleLite Braille Driver Parameters
#braille-parameters bl:BaudRate=9600 # 
[300,600,1200,2400,4800,9600,19200,38400]
#braille-parameters bl:KbEmu=yes # [yes,no]

# Baum Braille Driver Parameters
#braille-parameters bm:Protocols=default # [default,all,native]
#braille-parameters bm:VarioKeys=no # [no,yes]

# FreedomScientific Braille Driver Parameters
#braille-parameters fs:DebugPackets=no # [no,yes]

# HandyTech Braille Driver Parameters
#braille-parameters ht:InputMode=no # [no,yes]

# Libbraille Braille Driver Parameters
#braille-parameters lb:Device=/dev/ttyS0 #
#braille-parameters lb:Driver=auto #
#braille-parameters lb:Table=us.tbl #

# Papenmeier Braille Driver Parameters
#braille-parameters pm:ConfigFile=//etc/brltty/brltty-pm.conf
#braille-parameters pm:DebugKeys=no # [no,yes]
#braille-parameters pm:DebugReads=no # [no,yes]
#braille-parameters pm:DebugWrites=no # [no,yes]

# TTY Braille Driver Parameters
#braille-parameters tt:Baud=9600 #
#braille-parameters tt:CharSet=ISO8859-1 #
#braille-parameters tt:Columns=40 # [1-80]
#braille-parameters tt:Lines=1 # [1-3]
#braille-parameters tt:Locale= #
#braille-parameters tt:Term=vt100 # [terminfo]

# VisioBraille Braille Driver Parameters
#braille-parameters vs:Baud=57600 #
#braille-parameters vs:DisplaySize=40 # [20-40]
#braille-parameters vs:PromVersion=4 # [3-6]

# Voyager Braille Driver Parameters
#braille-parameters vo:InputMode=no # [no,yes]

# XWindow Braille Driver Parameters
#braille-parameters xw:Columns=40 # [1-80]
#braille-parameters xw:Font=name # []
#braille-parameters xw:Input=off # [off,on]
#braille-parameters xw:Lines=1 # [1-3]
#braille-parameters xw:Model=bare # [bare]
#braille-parameters xw:TkParms= #

###########################
# Generic Speech Settings #
###########################

# The speech-driver directive specifies the two-letter driver
# identification code of the driver for the speech synthesizer.
# If not specified, autodetection will be performed.
# (can be overridden with the -s [--speech-driver=] option)
#speech-driver auto # autodetect
#speech-driver al # Alva
#speech-driver bl # BrailleLite
#speech-driver cb # CombiBraille
#speech-driver es # ExternalSpeech (executes /usr/local/bin/externalspeech)
#speech-driver fl # FestivalLite (text to speech engine)
#speech-driver fv # Festival (text to speech engine)
#speech-driver gs # GenericSay (pipes to /usr/local/bin/say)
#speech-driver mp # Mikropuhe (text to speech engine)
#speech-driver sd # SpeechDispatcher (text to speech server)
#speech-driver sw # Swift (text to speech engine)
#speech-driver th # Theta (text to speech engine)
#speech-driver vv # ViaVoice (text to speech engine)

# The speech-fifo directive specifies the path to the FIFO used by the 
speech
# pass-through facility. Relative paths are anchored at "//etc/brltty".
# If not specified, the speech pass-through facility isn't enabled.
# (can be overridden with the -F [--speech-fifo=] option)
#speech-fifo spk

############################
# Speech Driver Parameters #
############################

# The speech-parameters directive passes non-generic parameters through
# to the speech driver.
# (can be overridden with the -S [--speech-parameters=] option)
#speech-parameters driver:parameter=setting,...

# ExternalSpeech Speech Driver Parameters
#speech-parameters es:Program=/usr/local/bin/externalspeech
#speech-parameters es:Uid=65534
#speech-parameters es:Gid=65534

# Festival Speech Driver Parameters
#speech-parameters fv:Command=festival # [/path/to/command]
#speech-parameters fv:Name= # [kevin,kal]

# FestivalLite Speech Driver Parameters
#speech-parameters fl:Pitch=100 # [50-200]

# GenericSay Speech Driver Parameters
#speech-parameters gs:Command=/usr/local/bin/say

# Mikropuhe Speech Driver Parameters
#speech-parameters mp:Name= # [/path/to/mikropuhe/name.pu5]
#speech-parameters mp:Pitch=0 # [-10-10]

# SpeechDispatcher Speech Driver Parameters
#speech-parameters sd:Language= # [two-letter language code]
#speech-parameters sd:Module= # 
[flite,festival,epos-generic,dtk-generic,...]
#speech-parameters sd:Port=6560 # [1-65535] # [1-65535]
#speech-parameters sd:Voice= # 
[male1,female1,male2,female2,male3,female3,child_male,child_female]

# Swift Speech Driver Parameters
#speech-parameters sw:Name= # [voice,/path/to/voice]

# Theta Speech Driver Parameters
#speech-parameters th:Age= # [1-99,-1--99]
#speech-parameters th:Gender= # [male,female,neuter]
#speech-parameters th:Language= # [two-letter language code]
#speech-parameters th:Name= # [voice,/path/to/voice]
#speech-parameters th:Pitch=0.0 # [-2.0-2.0]

# ViaVoice Speech Driver Parameters
#speech-parameters vv:IniFile=/usr/lib/ViaVoiceTTS/eci.ini
#speech-parameters vv:SampleRate= # [8000,11025,22050]
#speech-parameters vv:AbbreviationMode= # [on,off]
#speech-parameters vv:NumberMode= # [word,year]
#speech-parameters vv:SynthMode= # [sentence,none]
#speech-parameters vv:TextMode= # [talk,spell,literal,phonetic]
#speech-parameters vv:Language= # 
[AmericanEnglish,BritishEnglish,CastilianSpanish,MexicanSpanish,StandardFrench,CanadianFrench,StandardGerman,StandardItalian,SimplifiedChinese,BrazilianPortuguese]
#speech-parameters vv:Voice= # 
[AdultMale,AdultFemale,Child,ElderlyFemale,ElderlyMale]
#speech-parameters vv:VocalTract= # [male,female]
#speech-parameters vv:Breathiness= # [0-100]
#speech-parameters vv:HeadSize= # [0-100]
#speech-parameters vv:PitchBaseline= # [0-100]
#speech-parameters vv:PitchFluctuation= # [0-100]
#speech-parameters vv:Roughness= # [0-100]

#####################
# Keyboard Settings #
#####################

# The key-table directive specifies which key table to use. Relative paths 
are
# anchored at "//etc/brltty". If not specified, no key table is used.
# (can be overridden with the -k [--key-table=] option)
#key-table desktop # bindings for full keyboards
#key-table keypad # bindings for keypad-based navigation
#key-table laptop # bindings for keyboards without a keypad

# The keyboard-properties directive specifies which keyboards to monitor.
# If not specified, all keyboards are monitored.
# (can be overridden with the -K [--keyboard-properties=] option)
#keyboard-properties Type=any # [any,ps2,usb,bluetooth]
#keyboard-properties Vendor=0X0000 # [0X0000-0XFFFF]
#keyboard-properties Product=0X0000 # [0X0000-0XFFFF]

##################
# Sound Settings #
##################

# The pcm-device directive specifies the device to use for soundcard
# digital audio. If not specified, a method- and system-dependent
# default will be used.
# (can be overridden with the -p [--pcm-device=] option)
#pcm-device /path/to/device # most methods
#pcm-device pcm-handle-id # ALSA (see second parameter of snd_pcm_open)

# The pcm-device directive specifies the device to use for the Musical
# Instrument Digital Interface. If not specified, a method- and
# system-dependent default will be used.
# (can be overridden with the -m [--midi-device=] option)
#midi-device /path/to/device # most methods
#midi-device client:port # ALSA (may use number or case-sensitive substring 
of name)

##########################
# Miscellaneous Settings #
##########################

# The library-directory directive specifies the absolute path to the
# directory which contains the dynamically loadable drivers. If not
# specified, //lib/brltty will be used.
# (can be overridden with the -L [--library-directory=] option)
#library-directory //lib/brltty

# The writable-directory directive specifies the absolute path to a 
directory
# which can be written to (creation of missing but needed resources, etc). 
If
# not specified, "//lib/brltty/rw" will be used.
# (can be overridden with the -W [--writable-directory=] option)
#writable-directory //lib/brltty/rw

# The data-directory directive specifies the absolute path to the directory
# which contains driver data files (help files, configuration files, etc.). 
If
# not specified, "//etc/brltty" will be used.
# (can be overridden with the -D [--data-directory=] option)
#data-directory //etc/brltty

# The tables-directory directive specifies the absolute path to the 
directory
# which contains the text, attributes, contraction, and key tables. If not
# specified, "//etc/brltty" will be used.
# (can be overridden with the -T [--tables-directory=] option)
#tables-directory //etc/brltty

################################################
# Application Programming Interface Parameters #
################################################

# The api-parameters directive passes parameters to the Application
# Programming Interface.
# (can be overridden with the -A [--api-parameters=] option)
#api-parameters parameter=setting,...

#api-parameters Auth=//etc/brlapi.key
#api-parameters Host=:0
#api-parameters StackSize=65536

###########################
# Generic Screen Settings #
###########################

# The screen-driver directive specifies the two-letter driver
# identification code of the driver for the console screen.
# (can be overridden with the -x [--screen-driver=] option)
#screen-driver as # AtSpi
#screen-driver pb # PCBIOS
#screen-driver hd # Hurd
#screen-driver lx # Linux
#screen-driver sc # Screen
#screen-driver wn # Windows

############################
# Screen Driver Parameters #
############################

# The screen-parameters directive passes non-generic parameters through
# to the screen driver.
# (can be overridden with the -X [--screen-parameters=] option)
#screen-parameters driver:parameter=setting,...

# AtSpi Screen Driver Parameters
#screen-parameters as:Type=text+terminal # [text,terminal,all]

# Linux Screen Driver Parameters
#screen-parameters lx:Charset=name+... # []
#screen-parameters lx:DebugSfm=no # [no,yes]
#screen-parameters lx:Hfb=auto # [auto,vga,fb,0-7]

# Windows Screen Driver Parameters
#screen-parameters wn:Root=no # [no,yes]
#screen-parameters wn:FollowFocus=yes # [yes,no]

braille-device serial:COM13
braille-driver auto # autodetect
braille-device serial:COM13
braille-driver bm # Baum
braille-device serial:COM1
braille-driver ht # HandyTech

----- Original Message ----- 
From: "Samuel Thibault" <samuel.thibault at ens-lyon.org>
To: "Informal discussion between users and developers of BRLTTY." 
<brltty at mielke.cc>
Sent: Sunday, February 14, 2010 12:18 PM
Subject: Re: [BRLTTY] Baum nlt included.

Anders Holmberg, le Sun 14 Feb 2010 05:33:41 +0100, a écrit :
> In the brltty folder there is a brailledrivers filder.
> There is no baum file there.

Ah, these are just help files. Like a couple others, Baum doesn't have
one, but that doesn't mean that the baum driver wasn't compiled in.

> In the config  program there is no baum alternative.

Ok.
Could you send us the content of etc/brltty.conf ?

> I had to do -b bm -d com1 to make it work.

You mean you actually got braille output?

Samuel
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BRLTTY at mielke.cc
For general information, go to: http://mielke.cc/mailman/listinfo/brltty