[BRLTTY] Problem with Vario Ultra

[André-Abush Clause]

Le 29/11/2016 à 12:15, Dave Mielke a écrit :
> [quoted lines by André-Abush Clause on 2016/11/29 at 11:55 +0100]
>
>> Sorry, but this issue (with the VarioUltra) is not yet resolved.
>> I have tested with the last version of brltty available on github.
>> It is unusable on my Raspberry Pi running on Archlinux.
> Could you please test a possible fix? On line 37 of Programs/ktb_translate.c,
> you'll find:
>
>     #define ON_FIRST_RELEASE 1
>
> Try changing 1 to 0. This will, of course, then require a rebuild.
Unfortunately, it changes nothing...
I have the following lines about kernel log:
> Nov 29 14:20:04 alarmpi kernel: usb 1-1.4: new high-speed USB device 
> number 13 using dwc_otg
> Nov 29 14:20:04 alarmpi kernel: usb 1-1.4: New USB device found, 
> idVendor=0904, idProduct=6102
> Nov 29 14:20:04 alarmpi kernel: usb 1-1.4: New USB device strings: 
> Mfr=4, Product=5, SerialNumber=6
> Nov 29 14:20:04 alarmpi kernel: usb 1-1.4: Product: VarioUltra40
> Nov 29 14:20:04 alarmpi kernel: usb 1-1.4: Manufacturer: BAUM Systeme GmbH
> Nov 29 14:20:04 alarmpi kernel: usb 1-1.4: SerialNumber: 
> a7af605f-7740-4dae-b329-202daf5ab80d
> Nov 29 14:20:14 alarmpi kernel: hid-generic 0003:0904:6102.0007: 
> usb_submit_urb(ctrl) failed: -1
> Nov 29 14:20:14 alarmpi kernel: hid-generic 0003:0904:6102.0007: 
> timeout initializing reports
> Nov 29 14:20:14 alarmpi kernel: hid-generic 0003:0904:6102.0007: 
> hiddev0,hidraw2: USB HID v1.10 Device [BAUM Systeme GmbH VarioUltra40] 
> on usb-3f980000.usb-1.4/input0
> Nov 29 14:21:26 alarmpi kernel: input: BRLTTY 5.4 Linux Screen Driver 
> Keyboard as /devices/virtual/input/input7
> Nov 29 14:21:26 alarmpi kernel: usb 1-1.4: usbfs: interface 0 claimed 
> by usbhid while 'brltty' sets config #1
> Nov 29 15:11:01 alarmpi kernel: usb 1-1.4: USB disconnect, device 
> number 13
>