[BRLTTY] Problem in 5.4

Sat Feb 25 14:24:50 EST 2017

On Sat, Feb 25, 2017 at 12:04:52PM -0500, Dave Mielke wrote:
> [quoted lines by Adrian van Bloois on 2017/02/25 at 16:39 +0100]
> 
> >Here is the log you asked for, I switched the display off twice during
> >the makeing of this log, and so started brltty twice as well.
> >The log is attached.
> 
> The information I'm looking for isn't in the log file. I think that's probably 
> because restarting brltty caused it to start to write the log file afresh. Are 
> you aale to save the old log file before restarting brltty?
Yes I did, here it is attache
> 
> -- 
> Dave Mielke           | 2213 Fox Crescent | The Bible is the very Word of God.
> Phone: 1-613-726-0014 | Ottawa, Ontario   | http://Mielke.cc/bible/
> EMail: Dave at Mielke.cc | Canada  K2A 1H7   | http://FamilyRadio.org/
> _______________________________________________
> This message was sent via the BRLTTY mailing list.
> To post a message, send an e-mail to: BRLTTY at brltty.com
> For general information, go to: http://brltty.com/mailman/listinfo/brltty

-- 
	Adri P. van Bloois


"Elegance is not a dispensable luxury but a factor that decides between 
 success and failure."
	Edsger W. Dijkstra
-------------- next part --------------
2017-02-25 at 20:22:20.220 [brltty] BRLTTY 5.4 rev unknown [http://brltty.com/]
2017-02-25 at 20:22:20.220 [brltty] lock descriptor allocated: queue-discarded-elements
2017-02-25 at 20:22:20.220 [brltty] Log Level: debug,inputs,outputs
2017-02-25 at 20:22:20.220 [brltty] pushed command environment: initial
2017-02-25 at 20:22:20.220 [brltty] report listener registered: 0: handleUpdateBrailleOnline
2017-02-25 at 20:22:20.221 [brltty] program exit event added: screen-data
2017-02-25 at 20:22:20.221 [brltty] Working Directory: /
2017-02-25 at 20:22:20.221 [brltty] Configuration File: /etc/brltty.conf
2017-02-25 at 20:22:20.221 [brltty] Updatable Directory: /var/lib/brltty
2017-02-25 at 20:22:20.221 [brltty] Preferences File: /var/lib/brltty/brltty.prefs
2017-02-25 at 20:22:20.221 [brltty] Writable Directory: /var/run/brltty
2017-02-25 at 20:22:20.221 [brltty] Drivers Directory: /usr/local/lib/brltty
2017-02-25 at 20:22:20.221 [brltty] Tables Directory: /etc/brltty
2017-02-25 at 20:22:20.221 [brltty] file opened: /var/lib/brltty/brltty.prefs fd=4
2017-02-25 at 20:22:20.221 [brltty] file opened: /var/lib/brltty/brltty.prefs fd=4
2017-02-25 at 20:22:20.221 [brltty] program exit event added: tunes
2017-02-25 at 20:22:20.221 [brltty] tune thread state change: 0 -> 1
2017-02-25 at 20:22:20.221 [brltty] tune thread state change: 1 -> 3
2017-02-25 at 20:22:20.221 [brltty] regions: text=0.0 status=0.0
2017-02-25 at 20:22:20.221 [brltty] shifts: full=1 half=0 vertical=5
2017-02-25 at 20:22:20.221 [brltty] compiling text table: /etc/brltty/Text/my.ttb
2017-02-25 at 20:22:20.221 [brltty] file opened: /etc/brltty/Text/my.ttb fd=8
2017-02-25 at 20:22:20.221 [brltty] including data file: /etc/brltty/Text/my.ttb
2017-02-25 at 20:22:20.221 [brltty] file opened: /etc/brltty/Text/ltr-latin.tti fd=9
2017-02-25 at 20:22:20.221 [brltty] including data file: /etc/brltty/Text/ltr-latin.tti
2017-02-25 at 20:22:20.221 [brltty] file opened: /etc/brltty/Text/ltr-alias.tti fd=10
2017-02-25 at 20:22:20.221 [brltty] including data file: /etc/brltty/Text/ltr-alias.tti
2017-02-25 at 20:22:20.222 [brltty] file opened: /etc/brltty/Text/ctl-latin.tti fd=9
2017-02-25 at 20:22:20.222 [brltty] including data file: /etc/brltty/Text/ctl-latin.tti
2017-02-25 at 20:22:20.222 [brltty] file opened: /etc/brltty/Text/num-dot6.tti fd=9
2017-02-25 at 20:22:20.222 [brltty] including data file: /etc/brltty/Text/num-dot6.tti
2017-02-25 at 20:22:20.222 [brltty] file opened: /etc/brltty/Text/num-alias.tti fd=10
2017-02-25 at 20:22:20.222 [brltty] including data file: /etc/brltty/Text/num-alias.tti
2017-02-25 at 20:22:20.223 [brltty] file opened: /etc/brltty/Text/common.tti fd=9
2017-02-25 at 20:22:20.223 [brltty] including data file: /etc/brltty/Text/common.tti
2017-02-25 at 20:22:20.223 [brltty] file opened: /etc/brltty/Text/spaces.tti fd=10
2017-02-25 at 20:22:20.223 [brltty] including data file: /etc/brltty/Text/spaces.tti
2017-02-25 at 20:22:20.223 [brltty] file opened: /etc/brltty/Text/boxes.tti fd=10
2017-02-25 at 20:22:20.223 [brltty] including data file: /etc/brltty/Text/boxes.tti
2017-02-25 at 20:22:20.223 [brltty] file opened: /etc/brltty/Text/blocks.tti fd=10
2017-02-25 at 20:22:20.223 [brltty] including data file: /etc/brltty/Text/blocks.tti
2017-02-25 at 20:22:20.223 [brltty] Text Table: my
2017-02-25 at 20:22:20.223 [brltty] program exit event added: text-table
2017-02-25 at 20:22:20.223 [brltty] Attributes Table: left_right
2017-02-25 at 20:22:20.223 [brltty] program exit event added: attributes-table
2017-02-25 at 20:22:20.223 [brltty] Keyboard Property: type=
2017-02-25 at 20:22:20.223 [brltty] Keyboard Property: vendor=
2017-02-25 at 20:22:20.223 [brltty] Keyboard Property: product=
2017-02-25 at 20:22:20.223 [brltty] program exit event added: keyboard-table
2017-02-25 at 20:22:20.223 [brltty] Keyboard Table: none
2017-02-25 at 20:22:20.223 [brltty] program exit event added: screen-driver
2017-02-25 at 20:22:20.223 [brltty] activity action request: screen-driver: start
2017-02-25 at 20:22:20.223 [brltty] activity state change: screen-driver: 4[preparing]
2017-02-25 at 20:22:20.223 [brltty] activity state change: screen-driver: 1[prepared]
2017-02-25 at 20:22:20.223 [brltty] activity state change: screen-driver: 2[scheduled]
2017-02-25 at 20:22:20.223 [brltty] BrlAPI Server: release 0.6.5
2017-02-25 at 20:22:20.223 [brltty] API Parameter: auth=
2017-02-25 at 20:22:20.223 [brltty] API Parameter: host=
2017-02-25 at 20:22:20.223 [brltty] API Parameter: stacksize=
2017-02-25 at 20:22:20.223 [brltty] program exit event added: address-table
2017-02-25 at 20:22:20.223 [brltty] program exit event added: api-server
2017-02-25 at 20:22:20.223 [brltty] program exit event added: braille-data
2017-02-25 at 20:22:20.223 [brltty] program exit event added: braille-driver
2017-02-25 at 20:22:20.223 [brltty] activity action request: braille-driver: start
2017-02-25 at 20:22:20.223 [brltty] activity state change: braille-driver: 4[preparing]
2017-02-25 at 20:22:20.223 [brltty] Braille Display Dimensions: 1 row, 1 column
2017-02-25 at 20:22:20.223 [brltty] regions: text=0.1 status=0.0
2017-02-25 at 20:22:20.223 [brltty] shifts: full=1 half=0 vertical=5
2017-02-25 at 20:22:20.223 [brltty] activity state change: braille-driver: 1[prepared]
2017-02-25 at 20:22:20.223 [brltty] activity state change: braille-driver: 2[scheduled]
2017-02-25 at 20:22:20.223 [brltty] program exit event added: speech-data
2017-02-25 at 20:22:20.223 [brltty] program exit event added: speech-driver
2017-02-25 at 20:22:20.223 [brltty] activity action request: speech-driver: start
2017-02-25 at 20:22:20.223 [brltty] activity state change: speech-driver: 4[preparing]
2017-02-25 at 20:22:20.223 [brltty] activity state change: speech-driver: 1[prepared]
2017-02-25 at 20:22:20.223 [brltty] activity state change: speech-driver: 2[scheduled]
2017-02-25 at 20:22:20.223 [brltty] Speech Input: none
2017-02-25 at 20:22:20.223 [brltty] program exit event added: sessions
2017-02-25 at 20:22:20.223 [brltty] pushed command environment: main
2017-02-25 at 20:22:20.223 [brltty] pushed command handler: unhandled
2017-02-25 at 20:22:20.223 [brltty] pushed command handler: miscellaneous
2017-02-25 at 20:22:20.223 [brltty] pushed command handler: learn
2017-02-25 at 20:22:20.223 [brltty] pushed command handler: speech
2017-02-25 at 20:22:20.223 [brltty] pushed command handler: clipboard
2017-02-25 at 20:22:20.223 [brltty] pushed command handler: preferences
2017-02-25 at 20:22:20.223 [brltty] pushed command handler: toggle
2017-02-25 at 20:22:20.224 [brltty] report listener registered: 3: brailleWindowUpdatedListener
2017-02-25 at 20:22:20.224 [brltty] pushed command handler: touch
2017-02-25 at 20:22:20.224 [brltty] report listener registered: 0: keycodeCommandDataResetListener
2017-02-25 at 20:22:20.224 [brltty] pushed command handler: keycodes
2017-02-25 at 20:22:20.224 [brltty] report listener registered: 0: inputCommandDataResetListener
2017-02-25 at 20:22:20.224 [brltty] pushed command handler: input
2017-02-25 at 20:22:20.224 [brltty] pushed command handler: navigation
2017-02-25 at 20:22:20.224 [brltty] pushed command handler: screen
2017-02-25 at 20:22:20.224 [brltty] pushed command handler: custom
2017-02-25 at 20:22:20.224 [brltty] pushed command handler: API
2017-02-25 at 20:22:20.224 [brltty] activity state change: screen-driver: 6[starting]
2017-02-25 at 20:22:20.224 [brltty] checking for screen driver: lx
2017-02-25 at 20:22:20.224 [brltty] initializing screen driver: lx
2017-02-25 at 20:22:20.224 [brltty] device directory: /dev
2017-02-25 at 20:22:20.224 [brltty] checking screen device: /dev/vcsa
2017-02-25 at 20:22:20.224 [brltty] screen device: vcsa
2017-02-25 at 20:22:20.224 [brltty] checking console device: /dev/tty0
2017-02-25 at 20:22:20.224 [brltty] console device: tty0
2017-02-25 at 20:22:20.224 [brltty] device opened: /dev/tty1: fd=11
2017-02-25 at 20:22:20.224 [brltty] device opened: /dev/vcsa: fd=13
2017-02-25 at 20:22:20.224 [brltty] starting host command: /sbin/modprobe -q uinput
2017-02-25 at 20:22:20.225 [brltty] host command exit status: 0: /sbin/modprobe
2017-02-25 at 20:22:20.225 [brltty] activity state change: braille-driver: 6[starting]
2017-02-25 at 20:22:20.225 [brltty] checking braille device: usb:
2017-02-25 at 20:22:20.225 [brltty] checking for braille driver: al
2017-02-25 at 20:22:20.225 [brltty] initializing braille driver: al -> usb:
2017-02-25 at 20:22:20.226 [brltty] USB: Manufacturer Name: Optelec
2017-02-25 at 20:22:20.226 [brltty] USB: Product Description: ALVA BC680
2017-02-25 at 20:22:20.227 [brltty] USB: Serial Number: 00A0963BA5DC-1
2017-02-25 at 20:22:20.227 [brltty] USB configuration set error 16: Device or resource busy.
2017-02-25 at 20:22:20.227 [brltty] USB interface in use: 0 (usbhid)
2017-02-25 at 20:22:20.242 [brltty] program exit event added: sorted-usb-serial-adapters
2017-02-25 at 20:22:20.245 [brltty] Hardware Version: 0
2017-02-25 at 20:22:20.245 [brltty] Firmware Version: 3.0.2
2017-02-25 at 20:22:20.245 [brltty] Base Bluetooth Module Version: 1.20
2017-02-25 at 20:22:20.245 [brltty] Feature Pack Bluetooth Module Version: 0
2017-02-25 at 20:22:20.245 [brltty] Base Mac Address: 00:A0:96:3B:A5:DC
2017-02-25 at 20:22:20.245 [brltty] Feature Pack Mac Address: 00:00:00:00:00:00
2017-02-25 at 20:22:20.245 [brltty] detected Alva BC680: 80 columns, 0 status cells
2017-02-25 at 20:22:20.246 [brltty] Braille Display Dimensions: 1 row, 80 columns
2017-02-25 at 20:22:20.246 [brltty] regions: text=0.80 status=0.0
2017-02-25 at 20:22:20.246 [brltty] shifts: full=80 half=40 vertical=5
2017-02-25 at 20:22:20.246 [brltty] Key Bindings: bc680
2017-02-25 at 20:22:20.246 [brltty] program exit event added: sorted-command-table
2017-02-25 at 20:22:20.246 [brltty] file opened: /etc/brltty/Input/al/bc680.ktb fd=17
2017-02-25 at 20:22:20.246 [brltty] including data file: /etc/brltty/Input/al/bc680.ktb
2017-02-25 at 20:22:20.246 [brltty] file opened: /etc/brltty/Input/al/bc-etouch.kti fd=18
2017-02-25 at 20:22:20.246 [brltty] including data file: /etc/brltty/Input/al/bc-etouch.kti
2017-02-25 at 20:22:20.246 [brltty] file opened: /etc/brltty/Input/al/bc-smartpad.kti fd=18
2017-02-25 at 20:22:20.246 [brltty] including data file: /etc/brltty/Input/al/bc-smartpad.kti
2017-02-25 at 20:22:20.246 [brltty] file opened: /etc/brltty/Input/al/bc-thumb.kti fd=18
2017-02-25 at 20:22:20.246 [brltty] including data file: /etc/brltty/Input/al/bc-thumb.kti
2017-02-25 at 20:22:20.246 [brltty] file opened: /etc/brltty/Input/al/bc.kti fd=18
2017-02-25 at 20:22:20.246 [brltty] including data file: /etc/brltty/Input/al/bc.kti
2017-02-25 at 20:22:20.246 [brltty] program exit event added: sorted-keyboard-functions
2017-02-25 at 20:22:20.246 [brltty] file opened: /etc/brltty/Input/al/../chords.kti fd=19
2017-02-25 at 20:22:20.246 [brltty] including data file: /etc/brltty/Input/al/../chords.kti
2017-02-25 at 20:22:20.246 [brltty] file opened: /etc/brltty/Input/al/../toggle.kti fd=20
2017-02-25 at 20:22:20.246 [brltty] including data file: /etc/brltty/Input/al/../toggle.kti
2017-02-25 at 20:22:20.246 [brltty] file opened: /etc/brltty/Input/al/../toggle.kti fd=20
2017-02-25 at 20:22:20.246 [brltty] including data file: /etc/brltty/Input/al/../toggle.kti
2017-02-25 at 20:22:20.246 [brltty] file opened: /etc/brltty/Input/al/../toggle.kti fd=20
2017-02-25 at 20:22:20.246 [brltty] including data file: /etc/brltty/Input/al/../toggle.kti
2017-02-25 at 20:22:20.246 [brltty] file opened: /etc/brltty/Input/al/../toggle.kti fd=20
2017-02-25 at 20:22:20.246 [brltty] including data file: /etc/brltty/Input/al/../toggle.kti
2017-02-25 at 20:22:20.246 [brltty] file opened: /etc/brltty/Input/al/../toggle.kti fd=20
2017-02-25 at 20:22:20.246 [brltty] including data file: /etc/brltty/Input/al/../toggle.kti
2017-02-25 at 20:22:20.247 [brltty] file opened: /etc/brltty/Input/al/../toggle.kti fd=20
2017-02-25 at 20:22:20.247 [brltty] including data file: /etc/brltty/Input/al/../toggle.kti
2017-02-25 at 20:22:20.247 [brltty] file opened: /etc/brltty/Input/al/../toggle.kti fd=20
2017-02-25 at 20:22:20.247 [brltty] including data file: /etc/brltty/Input/al/../toggle.kti
2017-02-25 at 20:22:20.247 [brltty] file opened: /etc/brltty/Input/al/../toggle.kti fd=20
2017-02-25 at 20:22:20.247 [brltty] including data file: /etc/brltty/Input/al/../toggle.kti
2017-02-25 at 20:22:20.247 [brltty] file opened: /etc/brltty/Input/al/../toggle.kti fd=20
2017-02-25 at 20:22:20.247 [brltty] including data file: /etc/brltty/Input/al/../toggle.kti
2017-02-25 at 20:22:20.247 [brltty] file opened: /etc/brltty/Input/al/../toggle.kti fd=20
2017-02-25 at 20:22:20.247 [brltty] including data file: /etc/brltty/Input/al/../toggle.kti
2017-02-25 at 20:22:20.247 [brltty] file opened: /etc/brltty/Input/al/../menu.kti fd=20
2017-02-25 at 20:22:20.247 [brltty] including data file: /etc/brltty/Input/al/../menu.kti
2017-02-25 at 20:22:20.247 [brltty] file opened: /etc/brltty/Input/al/my.ktb fd=18
2017-02-25 at 20:22:20.247 [brltty] including data file: /etc/brltty/Input/al/my.ktb
2017-02-25 at 20:22:20.247 [brltty] /etc/brltty/Input/al/my.ktb[19]: table title specified more than once
2017-02-25 at 20:22:20.247 [brltty] file opened: /etc/brltty/Input/al/my.ktb fd=18
2017-02-25 at 20:22:20.247 [brltty] including data file: /etc/brltty/Input/al/my.ktb
2017-02-25 at 20:22:20.247 [brltty] /etc/brltty/Input/al/my.ktb[19]: table title specified more than once
2017-02-25 at 20:22:20.248 [brltty] Key Table: /etc/brltty/Input/al/bc680.ktb
2017-02-25 at 20:22:20.248 [brltty] constructing special screen: help
2017-02-25 at 20:22:20.249 [brltty] report listener registered: 0: brlapi_handleReports
2017-02-25 at 20:22:20.249 [brltty] Braille Driver: al [Alva]
2017-02-25 at 20:22:20.249 [brltty] Alva Braille Driver: version 2.2
2017-02-25 at 20:22:20.249 [brltty] Braille Parameter: rotatedcells=
2017-02-25 at 20:22:20.249 [brltty] Braille Parameter: secondaryroutingkeyemulation=
2017-02-25 at 20:22:20.249 [brltty] Braille Device: usb:
2017-02-25 at 20:22:20.249 [brltty] Old Preferences File: /etc/brltty-al.prefs
2017-02-25 at 20:22:20.249 [brltty] regions: text=0.80 status=0.0
2017-02-25 at 20:22:20.249 [brltty] shifts: full=80 half=40 vertical=5
2017-02-25 at 20:22:20.249 [brltty] program exit event added: alert-tunes
2017-02-25 at 20:22:20.249 [brltty] activity state change: braille-driver: 3[started]
2017-02-25 at 20:22:20.249 [brltty] activity state change: speech-driver: 6[starting]
2017-02-25 at 20:22:20.249 [brltty] checking for speech driver: es
2017-02-25 at 20:22:20.249 [tune-thread] starting host command: /sbin/modprobe -q pcspkr
2017-02-25 at 20:22:20.250 [tune-thread] host command exit status: 0: /sbin/modprobe
2017-02-25 at 20:22:20.250 [tune-thread] console opened: fd=18
2017-02-25 at 20:22:20.250 [tune-thread] program exit event added: console-stream
2017-02-25 at 20:22:20.250 [tune-thread] beeper enabled
2017-02-25 at 20:22:20.250 [tune-thread] tone: MSecs:60 Freq:329
2017-02-25 at 20:22:20.251 [brltty] initializing speech driver: es
2017-02-25 at 20:22:20.251 [brltty] device opened: /dev/tty0: fd=22
2017-02-25 at 20:22:20.251 [speech-driver] eSpeak version 1.47.11  03.May.13
2017-02-25 at 20:22:20.255 [brltty] Speech Driver: es [eSpeak]
2017-02-25 at 20:22:20.255 [brltty] eSpeak Speech Driver: version 0.3 
2017-02-25 at 20:22:20.255 [brltty] Speech Parameter: path=
2017-02-25 at 20:22:20.255 [brltty] Speech Parameter: punctlist=
2017-02-25 at 20:22:20.255 [brltty] Speech Parameter: voice=
2017-02-25 at 20:22:20.255 [brltty] Speech Parameter: maxrate=
2017-02-25 at 20:22:20.255 [brltty] activity state change: speech-driver: 3[started]
2017-02-25 at 20:22:20.310 [tune-thread] tone: MSecs:100 Freq:440
2017-02-25 at 20:22:20.726 [brltty] checking uinput device: /dev/uinput
2017-02-25 at 20:22:20.726 [brltty] uinput device: uinput
2017-02-25 at 20:22:20.726 [brltty] device opened: /dev/uinput: fd=23
2017-02-25 at 20:22:20.726 [brltty] uinput opened: uinput fd=23
2017-02-25 at 20:22:20.726 [brltty] report listener registered: 1: lxBrailleOfflineListener
2017-02-25 at 20:22:20.726 [brltty] Screen Driver: lx [Linux]
2017-02-25 at 20:22:20.726 [brltty] Linux Screen Driver:
2017-02-25 at 20:22:20.726 [brltty] Screen Parameter: charset=
2017-02-25 at 20:22:20.726 [brltty] Screen Parameter: debugsfm=
2017-02-25 at 20:22:20.726 [brltty] Screen Parameter: hfb=
2017-02-25 at 20:22:20.726 [brltty] Screen Parameter: vt=
2017-02-25 at 20:22:20.726 [brltty] activity state change: screen-driver: 3[started]
2017-02-25 at 20:22:20.726 [brltty] report listener unregistered: 0: brlapi_handleReports
2017-02-25 at 20:22:20.726 [brltty] pushed command environment: message
2017-02-25 at 20:22:20.726 [brltty] pushed command handler: message
2017-02-25 at 20:22:22.310 [tune-thread] beeper disabled
2017-02-25 at 20:22:24.730 [brltty] popped command handler: message
2017-02-25 at 20:22:24.730 [brltty] popped command environment: message
2017-02-25 at 20:22:24.730 [brltty] report listener registered: 0: brlapi_handleReports