[BRLTTY] BRLTTY and Raspberry PI
Dave Mielke
Dave at mielke.cc
Mon May 2 11:14:57 EDT 2022
[quoted lines by kperry at blinksoft.com on 2022/05/01 at 21:13 -0400]
>I was not able to get it to work connected as serial if it is supposed
>to.
I didn't think that an Orbit Reader has a serial port. You should be able to use it via usb:, though.
This being said, it probably has an internal USB to serial adapter. When you connect it (without brltty running), you'll probably see a new device named either ttyUSB0 or ttyACM0 (let's use ttyUSB0). You should then be able to tell brltty that the device is serial:ttyUSB0. While this should work, I wouldn't do it that way beause the tailing nmber (0 in this cse) is unpredictable when you have more than one such device.
--
I believe the Bible to be the very Word of God: http://Mielke.cc/bible/
Dave Mielke | 2213 Fox Crescent | WebHome: http://Mielke.cc/
EMail: Dave at Mielke.cc | Ottawa, Ontario | Twitter: @Dave_Mielke
Phone: +1 613 726 0014 | Canada K2A 1H7 |
More information about the BRLTTY
mailing list