[BRLTTY] Focus 1 70 display and USB to serial adapter: possible connecting this scenario?

Hammer Attila hammera at pickup.hu
Mon Dec 30 16:53:52 UTC 2024 

Hi Dave,


I send the actual logs and test results.

First test, 300 ms start delaying time, device: /dev/ttyACM0, yesterday 
tryed serial patch is applied too:
BRLTTY started infollowing time:
2024-12-30 at 15:20:03.015
/dev/ttyACM0 device is measured in 15:20, 15:24 and 15:25 times.
15:20 measure result shows the general 9600 baud related wrong settings:
Start time when measure begin: 15:20:27
15:20:27: speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt 
= ^R;
werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0;
-parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke -flusho -extproc

15:20:37: speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt 
= ^R;
werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0;
-parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke -flusho -extproc

15:20:47: speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt 
= ^R;
werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0;
-parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke -flusho -extproc

15:20:57: speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt 
= ^R;
werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0;
-parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke -flusho -extproc

15:21:07: speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt 
= ^R;
werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0;
-parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke -flusho -extproc

15:21:17: speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt 
= ^R;
werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0;
-parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke -flusho -extproc
End time when measure ended: 15:21:27

15:24 time serial baud rate measure script show equals wrong results:
Start time when measure begin: 15:24:04
15:24:04: speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt 
= ^R;
werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0;
-parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke -flusho -extproc

15:24:14: speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt 
= ^R;
werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0;
-parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke -flusho -extproc

15:24:24: speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt 
= ^R;
werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0;
-parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke -flusho -extproc

15:24:34: speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt 
= ^R;
werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0;
-parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke -flusho -extproc

15:24:44: speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt 
= ^R;
werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0;
-parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke -flusho -extproc

15:24:54: speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt 
= ^R;
werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0;
-parenb -parodd -cmspar cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 
vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke -flusho -extproc

End time when measure ended: 15:25:04

After this measurement, because the Focus 1 display is not initialized, 
and in 2024-12-30 at 15:25:14.153 the braille driver still failed to start, 
I do the manual stty -F /dev/ttyACM0 57600 command.
Braille display right initialized.
The driver begin right starting with 2024-12-30 at 15:25:18.539, the Focus 
1 display is right detected in 2024-12-30 at 15:25:18.903 time.
The 15:25 doed serial measurement script execution shows the right 57600 
baud rate related settings:
Start time when measure begin: 15:25:48
15:25:48: speed 57600 baud; rows 0; columns 0; line = 0;
intr = <undef>; quit = <undef>; erase = <undef>; kill = <undef>; eof = 
<undef>;
eol = <undef>; eol2 = <undef>; swtch = <undef>; start = <undef>; stop = 
<undef>;
susp = <undef>; rprnt = <undef>; werase = <undef>; lnext = <undef>;
discard = <undef>; min = 0; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 
bs0 vt0 ff0
-isig -icanon iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop 
-echoprt
-echoctl -echoke -flusho -extproc

15:25:58: speed 57600 baud; rows 0; columns 0; line = 0;
intr = <undef>; quit = <undef>; erase = <undef>; kill = <undef>; eof = 
<undef>;
eol = <undef>; eol2 = <undef>; swtch = <undef>; start = <undef>; stop = 
<undef>;
susp = <undef>; rprnt = <undef>; werase = <undef>; lnext = <undef>;
discard = <undef>; min = 0; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 
bs0 vt0 ff0
-isig -icanon iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop 
-echoprt
-echoctl -echoke -flusho -extproc

15:26:08: speed 57600 baud; rows 0; columns 0; line = 0;
intr = <undef>; quit = <undef>; erase = <undef>; kill = <undef>; eof = 
<undef>;
eol = <undef>; eol2 = <undef>; swtch = <undef>; start = <undef>; stop = 
<undef>;
susp = <undef>; rprnt = <undef>; werase = <undef>; lnext = <undef>;
discard = <undef>; min = 0; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 
bs0 vt0 ff0
-isig -icanon iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop 
-echoprt
-echoctl -echoke -flusho -extproc

15:26:18: speed 57600 baud; rows 0; columns 0; line = 0;
intr = <undef>; quit = <undef>; erase = <undef>; kill = <undef>; eof = 
<undef>;
eol = <undef>; eol2 = <undef>; swtch = <undef>; start = <undef>; stop = 
<undef>;
susp = <undef>; rprnt = <undef>; werase = <undef>; lnext = <undef>;
discard = <undef>; min = 0; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 
bs0 vt0 ff0
-isig -icanon iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop 
-echoprt
-echoctl -echoke -flusho -extproc

15:26:28: speed 57600 baud; rows 0; columns 0; line = 0;
intr = <undef>; quit = <undef>; erase = <undef>; kill = <undef>; eof = 
<undef>;
eol = <undef>; eol2 = <undef>; swtch = <undef>; start = <undef>; stop = 
<undef>;
susp = <undef>; rprnt = <undef>; werase = <undef>; lnext = <undef>;
discard = <undef>; min = 0; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 
bs0 vt0 ff0
-isig -icanon iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop 
-echoprt
-echoctl -echoke -flusho -extproc

15:26:38: speed 57600 baud; rows 0; columns 0; line = 0;
intr = <undef>; quit = <undef>; erase = <undef>; kill = <undef>; eof = 
<undef>;
eol = <undef>; eol2 = <undef>; swtch = <undef>; start = <undef>; stop = 
<undef>;
susp = <undef>; rprnt = <undef>; werase = <undef>; lnext = <undef>;
discard = <undef>; min = 0; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 
bs0 vt0 ff0
-isig -icanon iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop 
-echoprt
-echoctl -echoke -flusho -extproc

End time when measure ended: 15:26:48

Next test, 300 MS delay time, the modified -d ttyACM0+baud=57600 command:
Test started: 16:05
Used device parameter: -d ttyACM0+baud=57600
Serial baud measure result:
Start time when measure begin: 16:05:03
16:05:03: speed 57600 baud; rows 0; columns 0; line = 0;
intr = <undef>; quit = <undef>; erase = <undef>; kill = <undef>; eof = 
<undef>;
eol = <undef>; eol2 = <undef>; swtch = <undef>; start = <undef>; stop = 
<undef>;
susp = <undef>; rprnt = <undef>; werase = <undef>; lnext = <undef>;
discard = <undef>; min = 0; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 
bs0 vt0 ff0
-isig -icanon iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop 
-echoprt
-echoctl -echoke -flusho -extproc

16:05:13: speed 57600 baud; rows 0; columns 0; line = 0;
intr = <undef>; quit = <undef>; erase = <undef>; kill = <undef>; eof = 
<undef>;
eol = <undef>; eol2 = <undef>; swtch = <undef>; start = <undef>; stop = 
<undef>;
susp = <undef>; rprnt = <undef>; werase = <undef>; lnext = <undef>;
discard = <undef>; min = 0; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 
bs0 vt0 ff0
-isig -icanon iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop 
-echoprt
-echoctl -echoke -flusho -extproc

16:05:23: speed 57600 baud; rows 0; columns 0; line = 0;
intr = <undef>; quit = <undef>; erase = <undef>; kill = <undef>; eof = 
<undef>;
eol = <undef>; eol2 = <undef>; swtch = <undef>; start = <undef>; stop = 
<undef>;
susp = <undef>; rprnt = <undef>; werase = <undef>; lnext = <undef>;
discard = <undef>; min = 0; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 
bs0 vt0 ff0
-isig -icanon iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop 
-echoprt
-echoctl -echoke -flusho -extproc

16:05:33: speed 57600 baud; rows 0; columns 0; line = 0;
intr = <undef>; quit = <undef>; erase = <undef>; kill = <undef>; eof = 
<undef>;
eol = <undef>; eol2 = <undef>; swtch = <undef>; start = <undef>; stop = 
<undef>;
susp = <undef>; rprnt = <undef>; werase = <undef>; lnext = <undef>;
discard = <undef>; min = 0; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 
bs0 vt0 ff0
-isig -icanon iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop 
-echoprt
-echoctl -echoke -flusho -extproc

16:05:43: speed 57600 baud; rows 0; columns 0; line = 0;
intr = <undef>; quit = <undef>; erase = <undef>; kill = <undef>; eof = 
<undef>;
eol = <undef>; eol2 = <undef>; swtch = <undef>; start = <undef>; stop = 
<undef>;
susp = <undef>; rprnt = <undef>; werase = <undef>; lnext = <undef>;
discard = <undef>; min = 0; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 
bs0 vt0 ff0
-isig -icanon iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop 
-echoprt
-echoctl -echoke -flusho -extproc

16:05:54: speed 57600 baud; rows 0; columns 0; line = 0;
intr = <undef>; quit = <undef>; erase = <undef>; kill = <undef>; eof = 
<undef>;
eol = <undef>; eol2 = <undef>; swtch = <undef>; start = <undef>; stop = 
<undef>;
susp = <undef>; rprnt = <undef>; werase = <undef>; lnext = <undef>;
discard = <undef>; min = 0; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon 
-ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 
bs0 vt0 ff0
-isig -icanon iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop 
-echoprt
-echoctl -echoke -flusho -extproc

End time when measure ended: 16:06:04


Precise, the entire used modified command with usual works when the 
delaying time is 300 MS or higher:
LANG=C brltty -ldebug,usb,serial,inpkts,outpkts -b fs -d 
ttyACM0+baud=57600 -L brltty_usb_serial_16:05_300ms.log && python3 
serial_measure.py

Other measurements is not need, because baud rate this situation setted 
correctly.
Braille display is detected correct with following time: 
2024-12-30 at 16:05:04.035

Very interesting, when I restarting entire system, braille display is 
not initializing.

When I trying this working command variation, some time BRLTTY correct 
set the baud rate and initializing the display, some time not.

I tried increasing delaying time with 500 Ms (you will be seeing the 
modified waittime related patch), some time initializing the display, 
some time not.

In the /etc/brltty.conf file not possible set this baud rate related 
modification for example with Braille parameters the FS driver?

So, partially we founded a working solution, begin going the good direction.

I think the 1000 or 2000 MS perhaps will be too long wait time. What do 
you think?

If you thinking need more increasing the wait time with larger value 
from 500 Ms, I will be repeat the test.

So, BRLTTY is more time right starting this USB adapter when I using the 
-d ttyACM0+baud=57600 option.

Normal -d ttyACM0, or -d /dev/ttyACM0 newer automatically changing the 
baud rate in adapter side this usb serial adapter my experiences.


Hopefully you helps this diagnostic logs.


Attila

2024. 12. 30. 11:17 keltezéssel, Hammer Attila írta:
>
> Hi Dave!
>
> So I completely understand what you want to test.
> To be honest, since we tested a new patch, I automatically removed the 
> ready time delay code line fix that you suggested on December 24th, 
> but I can easily restore it.
> So I will repeat the test with the two patches.
> I will report back with the results and log files by this afternoon at 
> the latest.
> Thanks your patience and every help,
>
>
> Attila
>
> 2024. 12. 30. 1:13 keltezéssel, Dave Mielke írta:
>> [quoted lines by Hammer Attila on 2024/12/29 at 21:48 +0100]
>>
>>> What option me need use with ready timeout related, or what config settings
>>> in /etc/brltty.conf toggle this value the correct setting?
>> I meant "ready delay", i.e. the added line in braille.c:
>>
>>     descriptor.serial.options.readyDelay = 200;
>>
>> Please test with both the serial patch and this line added to the braille driver.
>>
>
> _______________________________________________
> This message was sent via the BRLTTY mailing list.
> To post a message, send an e-mail to:BRLTTY at brltty.app
> For general information, go to:http://brltty.app/mailman/listinfo/brltty
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brltty.app/pipermail/brltty/attachments/20241230/4a8332f8/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: brltty_latest_logs.zip
Type: application/zip
Size: 96776 bytes
Desc: not available
URL: <http://brltty.app/pipermail/brltty/attachments/20241230/4a8332f8/attachment-0001.zip>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: change_focus_serial_waittime.patch
Type: text/x-patch
Size: 525 bytes
Desc: not available
URL: <http://brltty.app/pipermail/brltty/attachments/20241230/4a8332f8/attachment-0002.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: serial-1.patch
Type: text/x-patch
Size: 1476 bytes
Desc: not available
URL: <http://brltty.app/pipermail/brltty/attachments/20241230/4a8332f8/attachment-0003.bin>

More information about the BRLTTY mailing list