[BRLTTY] Information about vario with usb port

[Rudolf Weeber]

Hi,
On Mon, Feb 27, 2006 at 01:07:19PM +0100, Sauro Cesaretti wrote:
> Hi,
> I need an information about the parameters that I must pass on brltty to use
> the vario display with one adapter serail-usb.
> I have one display serial and I connected it on the usb port using one 
> adapter, but
> now I don't know what are the correct parameters to use this display.
> Thanks in advance for all information.
I assume, you're using a Vario40.
Linux registers the usb-serial-adapter at
/dev/ttyUSB0 (1 for the second etc.)
So
brltty -b va -d /dev/ttyUSB0
should do the trick.
CU, Rudolf