[BRLTTY] usb to serial problems
Mario Lang
mlang at delysid.org
Sat Apr 26 07:10:30 EDT 2008
Daniel Dalton <d.dalton at iinet.net.au> writes:
> When pluging my braille note into my box with a usb to serial (and an
> adapter) (So it will connect since the port on the end of the cable is not
> different so won't connect to the BN) I then plug the usb end into my usb
> port.
> $ sudo dmesg | less
>
> The last two lines I see are:
>
> usb 1-1: new full speed USB device using uhci_hcd and address 13 usb 1-1:
> configuration #1 chosen from 1 choice pl2303 1-1:1.0: ch341-uart converter
> detected usb 1-1: ch341-uart converter now attached to ttyUSB1
>
> So I assume it is detected and run:
> brltty -b bn -d ttyUSB1
BRLTTY is usually configured to use the usb bus natively by default.
Does it help if you explicitly specify serial? Like:
brltty -b bn -d serial:ttyUSB1
--
CYa,
⡍⠁⠗⠊⠕ | Debian Developer <URL:http://debian.org/>
.''`. | Get my public key via finger mlang at db.debian.org
: :' : | 1024D/7FC1A0854909BCCDBE6C102DDFFC022A6B113E44
`. `'
`- <URL:http://delysid.org/> <URL:http://www.staff.tugraz.at/mlang/>
More information about the BRLTTY
mailing list