[BRLTTY] problem when reconectin braille

[Teemu M Kuusisto]

Hi

I recently updated to version 4.0 and after that ran into problems when 
reconnecting a braille display. I am using usb cable and my display is 
Alva satellite.

After reconnecting the usb brltty seems to restart every five seconds 
giving the starting message "BRLTTy 4.0". That means I have to kill brltty 
and run it again.

Here is some log I found:
# dmesg | tail -n 20
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: interface 0 claimed by usbfs while 'brltty' sets config 
#1
usb 4-1.1: usbfs: process 21537 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: interface 0 claimed by usbfs while 'brltty' sets config 
#1
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use
usb 4-1.1: usbfs: process 21690 (brltty) did not claim interface 0 before 
use

-Teemu