[BRLTTY] powerpc linux machine running brltty on usb switch
Cheryl Homiak
cah4110 at icloud.com
Sun Aug 24 22:54:49 EDT 2014
I have it; thanks! Will try it out before the evening is over or in the morning and get back to you.
> On Aug 24, 2014, at 9:41 PM, Dave Mielke <dave at mielke.cc> wrote:
>
> [quoted lines by Cheryl Homiak on 2014/08/24 at 14:25 -0500]
>
>> My problem arises with brltty on the powerpc machine running linux. When
>> started it works. However when the switch is used to switch from that machine
>> and then back again, the scanner and keyboard work but the braille display
>> does not respond to the change to that machine though it responds to changes
>> to all other machines. Once I have switched to the powerpc machine, the
>> braille display still shows what was on the last machine but is no longer
>> active with that machine either. However, as soon as I press a key (a
>> keystroke not enter) on the keyboard also attached to the switch or if I type
>> a character using a braillelite attached separately to the computer, then the
>> Hims Braille Edge immediately becomes fully operable on the linux machine.
>
> Please try this patch (attached as usb-1.patch).
>
> --
> Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God.
> Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/
> EMail: dave at mielke.cc | Canada K2A 1H7 | http://FamilyRadio.com/
> <usb-1.patch>_______________________________________________
> This message was sent via the BRLTTY mailing list.
> To post a message, send an e-mail to: BRLTTY at mielke.cc
> For general information, go to: http://mielke.cc/mailman/listinfo/brltty
More information about the BRLTTY
mailing list