[BRLTTY] esys 40 does not start

[Dave Mielke]

[quoted lines by Raoul on 2014/09/16 at 11:49 +0200]

>>send us a debug log:
>
>but, the log returns nothing else than initialization failed, driver not found.

That's because you didn't log with the two additional options that I requested.

The first option is -L/path/to/logfile. Note that this is an uppercase L. This 
option does two things. The frist is to write the log directly to a known file 
in order to isolate brltty logs from any other logs, and also to add timestamps 
to the log. The second is that it avoids any syslog redirection and/or 
filtering of debug logs, which is often done.

The second option is -ldebug,usb,inpkts,outpkts. Note that this is a loercase 
l. This enables the relevant log categories so that we can see the needed 
information.

And, as requested before, please capture this debug log on a Linux system 
(which'd be your Debian system).

>I investigated a bit more.
>when usb.c call libusb to read the reply from esys 40,
>the response is -1, where focus retuns 64 bytes; 
>and as i understand the thing:
>   1. or the interrupt is not set properly,
>   2. or a filter block the reply.

I'd appreciate it if you could please capture and send us the debug log rather 
than give us guesses and assumptions.

-- 
Dave Mielke           | 2213 Fox Crescent | The Bible is the very Word of God.
Phone: 1-613-726-0014 | Ottawa, Ontario   | http://Mielke.cc/bible/
EMail: dave at mielke.cc | Canada  K2A 1H7   | http://FamilyRadio.com/