[BRLTTY] brltty crashing shortly after starting
Mike Gorse
mgorse at alum.wpi.edu
Tue Dec 1 17:19:38 EST 2015
Hi all,
Thanks for your help, Dave.
>> (I don't have the udev rules file installed at the moment).
>
> Can you check with ps to see if brltty is already running before you connect
> your device?
It wasn't, but I was lying--I'd forgotten that udev rules can be installed
under /etc as well, and I'd installed the rules file there a long time
ago, so it is starting via udev. But I think that the udev file needs a
modification to work with systemd. So I don't know if the crash I was
seeing is a real-world problem, but I'm attaching a log and my brltty.conf
anyhow (is this what you were asking for, or is there a separate
preferences file?)
> How are you passing in -O0? The default build option is -O2.
Building an openSUSE package as a test, and passing -O0 through optflags.
>> Starting brltty via systemctl is not working for me, but I'm unsure if this is
>> related to the crash I just mentioned.
>
> Maybe the systemd service unit for brltty hasn't been installed. Do you get any
> error messages when you try systemctl start?
I have it installed. Brltty starts up, and systemctl seems to time out and
kill it. This seems to be a separate issue from the division by zero
(which might only happen if I try to install the unmodified udev rules
file on a system running systemd). Anyway, it appears that the Type=notify
change isn't working correctly for me, since, if I replace
Type=notify
ExecStart=/usr/bin/brltty --no-daemon
with
Type=forking
PIDFile=/run/brltty.pid
ExecStart=/usr/bin/brltty -P /run/brltty.pid
then starting via systemd works for me again. I'm also attaching a log
from starting with systemd, in case it's helpful to anyone reading this.
Thanks,
-Mike
-------------- next part --------------
2015-12-01 at 15:58:04.988 [brltty] BRLTTY 5.2 rev unknown [http://brltty.com/]
2015-12-01 at 15:58:04.989 [brltty] lock descriptor allocated: queue-discarded-elements
2015-12-01 at 15:58:04.989 [brltty] Log Level: 7
2015-12-01 at 15:58:04.989 [brltty] pushed command environment: initial
2015-12-01 at 15:58:04.989 [brltty] report listener registered: 0: handleUpdateBrailleOnline
2015-12-01 at 15:58:04.989 [brltty] program exit event added: pid-file
2015-12-01 at 15:58:04.989 [brltty] program exit event added: screen-data
2015-12-01 at 15:58:04.989 [brltty] Working Directory: /
2015-12-01 at 15:58:04.989 [brltty] Configuration File: /etc/brltty.conf
2015-12-01 at 15:58:04.989 [brltty] Updatable Directory: /var/lib/brltty
2015-12-01 at 15:58:04.989 [brltty] Preferences File: brltty.prefs
2015-12-01 at 15:58:04.989 [brltty] Writable Directory: /var/run/brltty
2015-12-01 at 15:58:04.989 [brltty] Drivers Directory: /usr/lib64/brltty
2015-12-01 at 15:58:04.989 [brltty] Tables Directory: /etc/brltty
2015-12-01 at 15:58:04.989 [brltty] program exit event added: tunes
2015-12-01 at 15:58:04.989 [brltty] tune thread state change: 0 -> 1
2015-12-01 at 15:58:04.990 [brltty] tune thread state change: 1 -> 3
2015-12-01 at 15:58:04.990 [brltty] regions: text=0.0 status=0.0
2015-12-01 at 15:58:04.990 [brltty] shifts: full=1 half=0 vertical=5
2015-12-01 at 15:58:04.990 [brltty] Text Table: en-nabcc
2015-12-01 at 15:58:04.990 [brltty] program exit event added: text-table
2015-12-01 at 15:58:04.990 [brltty] Attributes Table: left_right
2015-12-01 at 15:58:04.990 [brltty] program exit event added: attributes-table
2015-12-01 at 15:58:04.990 [brltty] program exit event added: contraction-table
2015-12-01 at 15:58:04.990 [brltty] Contraction Table: none
2015-12-01 at 15:58:04.990 [brltty] Keyboard Property: type=
2015-12-01 at 15:58:04.990 [brltty] Keyboard Property: vendor=
2015-12-01 at 15:58:04.990 [brltty] Keyboard Property: product=
2015-12-01 at 15:58:04.990 [brltty] program exit event added: keyboard-table
2015-12-01 at 15:58:04.990 [brltty] Keyboard Table: none
2015-12-01 at 15:58:04.990 [brltty] program exit event added: screen-driver
2015-12-01 at 15:58:04.990 [brltty] activity action request: screen-driver: start
2015-12-01 at 15:58:04.990 [brltty] activity state change: screen-driver: 4[preparing]
2015-12-01 at 15:58:04.990 [brltty] activity state change: screen-driver: 1[prepared]
2015-12-01 at 15:58:04.990 [brltty] activity state change: screen-driver: 2[scheduled]
2015-12-01 at 15:58:04.990 [brltty] BrlAPI Server: release 0.6.3
2015-12-01 at 15:58:04.990 [brltty] API Parameter: auth=
2015-12-01 at 15:58:04.990 [brltty] API Parameter: host=
2015-12-01 at 15:58:04.990 [brltty] API Parameter: stacksize=
2015-12-01 at 15:58:04.990 [brltty] program exit event added: address-table
2015-12-01 at 15:58:04.990 [brltty] program exit event added: api-server
2015-12-01 at 15:58:04.990 [brltty] program exit event added: braille-data
2015-12-01 at 15:58:04.990 [brltty] program exit event added: braille-driver
2015-12-01 at 15:58:04.990 [brltty] activity action request: braille-driver: start
2015-12-01 at 15:58:04.990 [brltty] activity state change: braille-driver: 4[preparing]
2015-12-01 at 15:58:04.990 [brltty] Braille Display Dimensions: 1 row, 1 column
2015-12-01 at 15:58:04.990 [brltty] regions: text=0.1 status=0.0
2015-12-01 at 15:58:04.990 [brltty] shifts: full=1 half=0 vertical=5
2015-12-01 at 15:58:04.990 [brltty] activity state change: braille-driver: 1[prepared]
2015-12-01 at 15:58:04.990 [brltty] activity state change: braille-driver: 2[scheduled]
2015-12-01 at 15:58:04.990 [brltty] program exit event added: speech-data
2015-12-01 at 15:58:04.990 [brltty] program exit event added: speech-driver
2015-12-01 at 15:58:04.990 [brltty] activity action request: speech-driver: start
2015-12-01 at 15:58:04.990 [brltty] activity state change: speech-driver: 4[preparing]
2015-12-01 at 15:58:04.990 [brltty] activity state change: speech-driver: 1[prepared]
2015-12-01 at 15:58:04.990 [brltty] activity state change: speech-driver: 2[scheduled]
2015-12-01 at 15:58:04.990 [brltty] Speech Input: none
2015-12-01 at 15:58:04.990 [brltty] feature not supported: service ready notification
2015-12-01 at 15:58:04.990 [brltty] program exit event added: sessions
2015-12-01 at 15:58:04.990 [brltty] pushed command environment: main
2015-12-01 at 15:58:04.990 [brltty] pushed command handler: unhandled
2015-12-01 at 15:58:04.990 [brltty] pushed command handler: miscellaneous
2015-12-01 at 15:58:04.990 [brltty] pushed command handler: learn
2015-12-01 at 15:58:04.990 [brltty] pushed command handler: speech
2015-12-01 at 15:58:04.990 [brltty] pushed command handler: clipboard
2015-12-01 at 15:58:04.991 [brltty] pushed command handler: preferences
2015-12-01 at 15:58:04.991 [brltty] pushed command handler: toggle
2015-12-01 at 15:58:04.991 [brltty] report listener registered: 3: brailleWindowUpdatedListener
2015-12-01 at 15:58:04.991 [brltty] pushed command handler: touch
2015-12-01 at 15:58:04.991 [brltty] report listener registered: 0: keycodeCommandDataResetListener
2015-12-01 at 15:58:04.991 [brltty] pushed command handler: keycodes
2015-12-01 at 15:58:04.991 [brltty] report listener registered: 0: inputCommandDataResetListener
2015-12-01 at 15:58:04.991 [brltty] pushed command handler: input
2015-12-01 at 15:58:04.991 [brltty] pushed command handler: navigation
2015-12-01 at 15:58:04.991 [brltty] pushed command handler: screen
2015-12-01 at 15:58:04.991 [brltty] pushed command handler: custom
2015-12-01 at 15:58:04.991 [brltty] pushed command handler: API
2015-12-01 at 15:58:04.991 [brltty] activity state change: screen-driver: 6[starting]
2015-12-01 at 15:58:04.991 [brltty] checking for screen driver: lx
2015-12-01 at 15:58:04.991 [brltty] initializing screen driver: lx
2015-12-01 at 15:58:04.991 [brltty] device directory: /dev
2015-12-01 at 15:58:04.991 [brltty] checking screen device: /dev/vcsa
2015-12-01 at 15:58:04.991 [brltty] screen device: vcsa
2015-12-01 at 15:58:04.991 [brltty] checking console device: /dev/tty0
2015-12-01 at 15:58:04.991 [brltty] console device: tty0
2015-12-01 at 15:58:04.991 [brltty] device opened: /dev/vcsa: fd=12
2015-12-01 at 15:58:04.991 [brltty] device opened: /dev/tty0: fd=13
2015-12-01 at 15:58:04.991 [brltty] starting host command: /sbin/modprobe -q uinput
2015-12-01 at 15:58:04.993 [brltty] host command exit status: 0: /sbin/modprobe
2015-12-01 at 15:58:04.993 [brltty] activity state change: braille-driver: 6[starting]
2015-12-01 at 15:58:04.993 [brltty] checking braille device: usb:25000072
2015-12-01 at 15:58:04.993 [brltty] performing braille driver autodetection
2015-12-01 at 15:58:04.993 [brltty] checking for braille driver: al
2015-12-01 at 15:58:04.994 [brltty] initializing braille driver: al -> usb:25000072
2015-12-01 at 15:58:05.075 [brltty] braille driver initialization failed: al -> usb:25000072
2015-12-01 at 15:58:05.075 [brltty] checking for braille driver: bm
2015-12-01 at 15:58:05.075 [brltty] initializing braille driver: bm -> usb:25000072
2015-12-01 at 15:58:05.158 [brltty] USB: Manufacturer Name: HumanWare
2015-12-01 at 15:58:05.159 [brltty] USB: Product Description: Brailliant 40
2015-12-01 at 15:58:05.161 [brltty] USB: Serial Number: 25000072
2015-12-01 at 15:58:05.161 [brltty] program exit event added: sorted-usb-serial-adapters
2015-12-01 at 15:58:05.162 [brltty] probing with Baum Escape protocol
2015-12-01 at 15:58:05.165 [brltty] activity state change: speech-driver: 6[starting]
2015-12-01 at 15:58:05.165 [brltty] no autodetectable speech drivers
2015-12-01 at 15:58:05.165 [brltty] checking for speech driver: no
2015-12-01 at 15:58:05.165 [brltty] initializing speech driver: no
2015-12-01 at 15:58:05.165 [brltty] Speech Driver: no [NoSpeech]
2015-12-01 at 15:58:05.165 [brltty] NoSpeech Speech Driver:
2015-12-01 at 15:58:05.165 [brltty] activity state change: speech-driver: 3[started]
2015-12-01 at 15:58:05.178 [brltty] Ignored Byte: 00
2015-12-01 at 15:58:06.080 [brltty] probing with Baum Escape protocol
2015-12-01 at 15:58:06.122 [brltty] Baum Serial Number: 25041572
2015-12-01 at 15:58:06.138 [brltty] Baum Device Identity: HWG Brailliant40
2015-12-01 at 15:58:06.138 [brltty] Cell Count: 40 (40 text, 0 status)
2015-12-01 at 15:58:06.138 [brltty] Braille Display Dimensions: 1 row, 40 columns
2015-12-01 at 15:58:06.138 [brltty] regions: text=0.40 status=0.0
2015-12-01 at 15:58:06.138 [brltty] shifts: full=40 half=20 vertical=5
2015-12-01 at 15:58:06.138 [brltty] Key Bindings: sv
2015-12-01 at 15:58:06.138 [brltty] program exit event added: sorted-command-table
2015-12-01 at 15:58:06.139 [brltty] file opened: /etc/brltty/Input/bm/sv.ktb fd=21
2015-12-01 at 15:58:06.139 [brltty] including data file: /etc/brltty/Input/bm/sv.ktb
2015-12-01 at 15:58:06.139 [brltty] file opened: /etc/brltty/Input/bm/display6.kti fd=22
2015-12-01 at 15:58:06.139 [brltty] including data file: /etc/brltty/Input/bm/display6.kti
2015-12-01 at 15:58:06.139 [brltty] file opened: /etc/brltty/Input/bm/d6.kti fd=23
2015-12-01 at 15:58:06.139 [brltty] including data file: /etc/brltty/Input/bm/d6.kti
2015-12-01 at 15:58:06.139 [brltty] file opened: /etc/brltty/Input/bm/routing6.kti fd=22
2015-12-01 at 15:58:06.139 [brltty] including data file: /etc/brltty/Input/bm/routing6.kti
2015-12-01 at 15:58:06.140 [brltty] Key Table: /etc/brltty/Input/bm/sv.ktb
2015-12-01 at 15:58:06.140 [brltty] constructing special screen: help
2015-12-01 at 15:58:06.154 [brltty] unknown module identifier: 4884
2015-12-01 at 15:58:06.154 [brltty] Cell Count: 0 (0 text, 0 status)
2015-12-01 at 15:58:06.154 [brltty] Ignored Byte: 57
2015-12-01 at 15:58:06.154 [brltty] Ignored Byte: 47
2015-12-01 at 15:58:06.154 [brltty] Ignored Byte: 20
2015-12-01 at 15:58:06.154 [brltty] Ignored Byte: 42
2015-12-01 at 15:58:06.154 [brltty] Braille Display Dimensions: 1 row, 0 columns
2015-12-01 at 15:58:06.154 [brltty] regions: text=0.0 status=0.0
2015-12-01 at 15:58:06.154 [brltty] shifts: full=1 half=0 vertical=5
2015-12-01 at 15:58:06.154 [brltty] report listener registered: 0: brlapi_handleReports
2015-12-01 at 15:58:06.154 [brltty] Braille Driver: bm [Baum]
2015-12-01 at 15:58:06.154 [brltty] Baum Braille Driver:
2015-12-01 at 15:58:06.154 [brltty] Braille Parameter: protocol=
2015-12-01 at 15:58:06.154 [brltty] Braille Parameter: variokeys=
2015-12-01 at 15:58:06.154 [brltty] Braille Device: usb:25000072
2015-12-01 at 15:58:06.154 [brltty] Old Preferences File: /etc/brltty-bm.prefs
2015-12-01 at 15:58:06.154 [brltty] cannot open file: /etc/brltty-bm.prefs: No such file or directory
2015-12-01 at 15:58:06.154 [brltty] regions: text=0.0 status=0.0
2015-12-01 at 15:58:06.154 [brltty] shifts: full=1 half=0 vertical=5
-------------- next part --------------
# Documents/brltty.conf. Generated from brltty.conf.in by configure.
###############################################################################
# BRLTTY - A background process providing access to the console screen (when in
# text mode) for a blind person using a refreshable braille display.
#
# Copyright (C) 1995-2015 by The BRLTTY Developers.
#
# BRLTTY comes with ABSOLUTELY NO WARRANTY.
#
# This is free software, placed under the terms of the
# GNU General Public License, as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any
# later version. Please see the file LICENSE-GPL for details.
#
# Web Page: http://brltty.com/
#
# This software is maintained by Dave Mielke <dave at mielke.cc>.
###############################################################################
# This is a configuration file template for the BRLTTY application.
# Uncomment those entries which apply to your personal needs and system
# requirements.
# BRLTTY expects to find its configuration file in "/etc/brltty.conf"
# (can be overridden with the -f [--configuration-file=] option).
# If it doesn't exist, then BRLTTY silently continues but may require
# that certain command line options be explicitly supplied.
# Blank lines are ignored. The character '#', anywhere on a line,
# initiates a comment; all characters from it to the end of that line
# are ignored.
# Each configuration entry consists of a keyword followed by its operand.
# An arbitrary amount of white space, (blanks and/or tabs), may occur
# before the keyword, as well as before and after the operand. Keyword
# processing is not case sensitive. Examples of valid entries are:
#
# Braille-Driver pm # Papenmeier braille displays.
# braille-device serial:ttyS0 # The first serial device.
# SPEECH-DRIVER fv # The Festival Text to Speech System.
# The default settings given within the following descriptions assume no
# special build options (see "./configure --help" in the top-level
# directory of the source tree.
############################
# Generic Braille Settings #
############################
# The braille-driver directive specifies the two-letter driver
# identification code of the driver for the braille display.
# If not specified, autodetection will be performed.
# If more than one driver, separated by commas, is specified,
# then autodetection will be performed amongst them.
# (can be overridden with the -b [--braille-driver=] option)
#braille-driver auto # autodetect
#braille-driver al # Alva
#braille-driver at # Albatross
#braille-driver ba # BrlAPI
#braille-driver bc # BrailComm
#braille-driver bd # Braudi
#braille-driver bg # B2G
#braille-driver bl # BrailleLite
#braille-driver bm # Baum
#braille-driver bn # BrailleNote
#braille-driver cb # CombiBraille
#braille-driver ce # Cebra
#braille-driver ec # EcoBraille
#braille-driver eu # EuroBraille
#braille-driver fs # FreedomScientific
#braille-driver hd # Hedo
#braille-driver hm # HIMS
#braille-driver ht # HandyTech
#braille-driver hw # HumanWare
#braille-driver ir # Iris
#braille-driver lb # Libbraille
#braille-driver lt # LogText
#braille-driver mb # MultiBraille
#braille-driver md # MDV
#braille-driver mm # BrailleMemo
#braille-driver mn # MiniBraille
#braille-driver mt # Metec
#braille-driver np # NinePoint
#braille-driver pg # Pegasus
#braille-driver pm # Papenmeier
#braille-driver sk # Seika
#braille-driver tn # TechniBraille
#braille-driver ts # TSI
#braille-driver tt # TTY
#braille-driver vd # VideoBraille
#braille-driver vo # Voyager, BraillePen/EasyLink
#braille-driver vr # Virtual
#braille-driver vs # VisioBraille
#braille-driver xw # XWindow
# The braille-device directive specifies the device to which the braille
# display is connected. The generic syntax is type:device. The device
# type is optional, and, for backward compatibility, defaults to serial.
# The following devices are supported (brackets indicate optionality):
# serial:path (relative paths are anchored at "/dev")
# usb:[serial-number]
# bluetooth:address
# If not specified, "usb:" will be used.
# If more than one device, separated by commas, is specified,
# then each of them will be probed in turn.
# (can be overridden with the -d [--braille-device=] option)
#braille-device serial:ttyS0 # First serial device.
#braille-device usb: # First USB device matching braille driver.
#braille-device usb:nnnnn # Specific USB device by serial number.
#braille-device bluetooth:xx:xx:xx:xx:xx:xx # Specific bluetooth device by address.
#
# NOTE: If the device is connected via a serial-to-USB adapter then setting
# braille-device to usb: will not work. In this case it needs to identify the
# virtual serial device which the kernel has created for the adapter, i.e. to
# something like serial:ttyUSB0 (see the kernel messages on device plug to get
# the actual device name).
# The release-device directive specifies whether or not the device to which the
# braille display is connected is to be released when the current screen or
# window can't be read by BRLTTY. If not specified, "on" will be used on Windows
# platforms and "off" will be used on all other platforms.
# (can be overridden with the -r [--release-device] option)
#release-device on # Release the device.
#release-device off # Don't release the device.
# The text-table directive specifies which text table to use. Relative paths
# are anchored at "/etc/brltty/Text". If not specified, locale-based
# autoselection with fallback to "en-nabcc" will be performed.
# (can be overridden with the -t [--text-table=] option)
#text-table auto # locale-based autoselection
#text-table ar # Arabic (generic)
#text-table as # Assamese
#text-table awa # Awadhi
#text-table bg # Bulgarian
#text-table bh # Bihari
#text-table bn # Bengali
#text-table bo # Tibetan
#text-table bra # Braj
#text-table brf # Braille Ready Format (for viewing .brf files within an editor or pager)
#text-table cs # Czech
#text-table cy # Welsh
#text-table da # Danish
#text-table da-1252 # Danish (Svend Thougaard, 2002-11-18)
#text-table da-lt # Danish (LogText)
#text-table de # German
#text-table dra # Dravidian
#text-table el # Greek
#text-table en # English
#text-table en_CA # English (Canada)
#text-table en_GB # English (United Kingdom)
#text-table en_US # English (United States)
#text-table en-nabcc # English (North American Braille Computer Code)
#text-table eo # Esperanto
#text-table es # Spanish
#text-table et # Estonian
#text-table fi # Finnish
#text-table fr # French
#text-table fr_CA # French (Canada)
#text-table fr_FR # French (France)
#text-table fr-2007 # French (unified 2007)
#text-table fr-cbifs # French (Code Braille Informatique Fran??ais Standard)
#text-table fr-vs # French (VisioBraille)
#text-table ga # Irish
#text-table gd # Gaelic
#text-table gon # Gondi
#text-table gu # Gujarati
#text-table he # Hebrew
#text-table hi # Hindi
#text-table hr # Croatian
#text-table hu # Hungarian
#text-table hy # Armenian
#text-table is # Icelandic
#text-table it # Italian
#text-table kha # Khasi
#text-table kn # Kannada
#text-table kok # Konkani
#text-table kru # Kurukh
#text-table lt # Lituanian
#text-table lv # Latvian
#text-table mg # Malagasy
#text-table mi # Maori
#text-table ml # Malayalam
#text-table mni # Manipuri
#text-table mr # Marathi
#text-table mt # Maltese
#text-table mun # Munda
#text-table mwr # Marwari
#text-table ne # Nepali
#text-table new # Newari
#text-table nl # Dutch
#text-table nl_BE # Dutch (Belgium)
#text-table nl_NL # Dutch (Netherlands)
#text-table no # Norwegian
#text-table no-generic # Norwegian (with support for other languages)
#text-table no-oup # Norwegian (Offentlig utvalg for punktskrift)
#text-table nwc # Newari (old)
#text-table or # Oriya
#text-table pa # Panjabi
#text-table pi # Pali
#text-table pl # Polish
#text-table pt # Portuguese
#text-table ro # Romanian
#text-table ru # Russian
#text-table sa # Sanskrit
#text-table sat # Santali
#text-table sd # Sindhi
#text-table sk # Slovak
#text-table sl # Slovenian
#text-table sv # Swedish
#text-table sv-1989 # Swedish (1989 standard)
#text-table sv-1996 # Swedish (1996 standard)
#text-table sw # Swahili
#text-table ta # Tamil
#text-table te # Telugu
#text-table tr # Turkish
#text-table vi # Vietnamese
# The attributes-table directive specifies which attributes table to use.
# Relative paths are anchored at "/etc/brltty/Attributes". If not specified,
# "left_right" will be used.
# (can be overridden with the -a [--attributes-table=] option)
#attributes-table left_right # foreground colour in the left column and background colour in the right column
#attributes-table invleft_right # inverse foreground colour in the left column and background colour in the right column
#attributes-table upper_lower # foreground colour in the upper square and background colour in the lower square
# The contraction-table directive specifies which contraction table to use.
# Relative paths are anchored at "/etc/brltty/Contraction". If not specified, no
# contraction table will be available.
# (can be overridden with the -c [--contraction-table=] option)
#contraction-table af # Afrikaans (contracted)
#contraction-table am # Amharic (uncontracted)
#contraction-table de-basis # German (uncontracted)
#contraction-table de-kurzschrift # German (contracted - 1998 standard)
#contraction-table de-vollschrift # German (basic contractions)
#contraction-table en-ueb-g2 # English (Unified English Braille, grade 2)
#contraction-table en-us-g2 # English (US, grade 2)
#contraction-table es # Spanish (grade 2)
#contraction-table fr-abrege # French (contracted)
#contraction-table fr-integral # French (uncontracted)
#contraction-table ha # Hausa (contracted)
#contraction-table id # Indonesian (contracted)
#contraction-table ja # Japanese (uncontracted)
#contraction-table ko-g1 # Korean (grade 1)
#contraction-table ko-g2 # Korean (grade 2)
#contraction-table ko # Korean (uncontracted)
#contraction-table mg # Malagasy (contracted)
#contraction-table mun # Munda (contracted)
#contraction-table nl # Dutch (contracted)
#contraction-table ny # Chichewa (contracted)
#contraction-table ipa # International Phonetic Alphabet
#contraction-table pt # Portuguese (grade 2)
#contraction-table si # Sinhalese (uncontracted)
#contraction-table sw # Swahili (contracted)
#contraction-table th # Thai (contracted)
#contraction-table zh-tw # Chinese (Taiwan, uncontracted)
#contraction-table zh-tw-ucb # Chinese (Taiwan, Unique Chinese Braille)
#contraction-table zu # Zulu (contracted)
#############################
# Braille Driver Parameters #
#############################
# The braille-parameters directive passes non-generic parameters through
# to the braille driver.
# (can be overridden with the -B [--braille-parameters=] option)
#braille-parameters driver:parameter=setting,...
# Alva Braille Driver Parameters
#braille-parameters al:RotatedCells=no # [no,yes]
#braille-parameters al:SecondaryRoutingKeyEmulation=no # [no,yes]
# BrlAPI Braille Driver Parameters
#braille-parameters ba:Auth=/etc/brlapi.key
#braille-parameters ba:Host=:0
# BrailleLite Braille Driver Parameters
#braille-parameters bl:BaudRate=9600 # [300,600,1200,2400,4800,9600,19200,38400]
#braille-parameters bl:KbEmu=yes # [yes,no]
# Baum Braille Driver Parameters
#braille-parameters bm:Protocol=default # [default,escape,hid1,hid2,ht,pb]
#braille-parameters bm:VarioKeys=no # [no,yes]
# EuroBraille Braille Driver Parameters
#braille-parameters eu:Protocol= # [auto,azerbraille,clio,eurobraille,notebraille,pupibraille,scriba,esys,esytime,iris,esysiris]
# HandyTech Braille Driver Parameters
#braille-parameters ht:SetTime=no # [no,yes]
# Iris Braille Driver Parameters
#braille-parameters ir:Embedded= # [no,yes]
#braille-parameters ir:LatchDelay=10 # [0-100] (tenths of a second)
#braille-parameters ir:Protocol= # [eurobraille,native]
# Libbraille Braille Driver Parameters
#braille-parameters lb:Device=/dev/ttyS0 #
#braille-parameters lb:Driver=auto #
#braille-parameters lb:Table=us.tbl #
# TSI Braille Driver Parameters
#braille-parameters ts:HighBaud=yes # [no,yes]
#braille-parameters ts:SetBaud=9600 # [4800,9600,19200]
# TTY Braille Driver Parameters
#braille-parameters tt:Baud=9600 #
#braille-parameters tt:CharSet=ISO8859-1 #
#braille-parameters tt:Columns=40 # [1-80]
#braille-parameters tt:Lines=1 # [1-3]
#braille-parameters tt:Locale= #
#braille-parameters tt:Term=vt100 # [terminfo]
# VisioBraille Braille Driver Parameters
#braille-parameters vs:Baud=57600 #
#braille-parameters vs:DisplaySize=40 # [20-40]
#braille-parameters vs:PromVersion=4 # [3-6]
# XWindow Braille Driver Parameters
#braille-parameters xw:Columns=40 # [1-80]
#braille-parameters xw:Font=name # []
#braille-parameters xw:Input=off # [off,on]
#braille-parameters xw:Lines=1 # [1-3]
#braille-parameters xw:Model=bare # [bare]
#braille-parameters xw:TkParms= #
###########################
# Generic Speech Settings #
###########################
# The speech-driver directive specifies the two-letter driver
# identification code of the driver for the speech synthesizer.
# If not specified, autodetection will be performed.
# If more than one driver, separated by commas, is specified,
# then autodetection will be performed amongst them.
# (can be overridden with the -s [--speech-driver=] option)
#speech-driver auto # autodetect
#speech-driver al # Alva
#speech-driver an # Android (text to speech engine)
#speech-driver bl # BrailleLite
#speech-driver cb # CombiBraille
#speech-driver es # eSpeak (text to speech engine)
#speech-driver fl # FestivalLite (text to speech engine)
#speech-driver fv # Festival (text to speech engine)
#speech-driver gs # GenericSay (pipes to /usr/local/bin/say)
#speech-driver mp # Mikropuhe (text to speech engine)
#speech-driver sd # SpeechDispatcher (text to speech server)
#speech-driver sw # Swift (text to speech engine)
#speech-driver th # Theta (text to speech engine)
#speech-driver vv # ViaVoice (text to speech engine)
#speech-driver xs # ExternalSpeech (executes /usr/local/bin/externalspeech)
# The speech-input directive specifies the name of the file system object
# (FIFO, named pipe, named socket, etc) which can be used by external
# applications for text-to-speech conversion via BRLTTY's speech driver.
# Relative paths are anchored at the current working directory. If not
# specified, the file system object isn't created.
# (can be overridden with the -i [--speech-input=] option)
#speech-input /path/to/file-system-object
############################
# Speech Driver Parameters #
############################
# The speech-parameters directive passes non-generic parameters through
# to the speech driver.
# (can be overridden with the -S [--speech-parameters=] option)
#speech-parameters driver:parameter=setting,...
# eSpeak Speech Driver Parameters
#speech-parameters es:MaxRate=450 # [80-]
#speech-parameters es:Path=
#speech-parameters es:PunctList=
#speech-parameters es:Voice=default
# ExternalSpeech Speech Driver Parameters
#speech-parameters xs:Program=/usr/local/bin/externalspeech
#speech-parameters xs:Uid=65534
#speech-parameters xs:Gid=65534
# Festival Speech Driver Parameters
#speech-parameters fv:Command=festival # [/path/to/command]
#speech-parameters fv:Name= # [kevin,kal]
# FestivalLite Speech Driver Parameters
#speech-parameters fl:Pitch=100 # [50-200]
# GenericSay Speech Driver Parameters
#speech-parameters gs:Command=/usr/local/bin/say
# Mikropuhe Speech Driver Parameters
#speech-parameters mp:Name= # [/path/to/mikropuhe/name.pu5]
#speech-parameters mp:Pitch=0 # [-10-10]
# SpeechDispatcher Speech Driver Parameters
#speech-parameters sd:Language= # [two-letter language code]
#speech-parameters sd:Module= # [flite,festival,epos-generic,dtk-generic,...]
#speech-parameters sd:Port=6560 # [1-65535] # [1-65535]
#speech-parameters sd:Voice= # [male1,female1,male2,female2,male3,female3,child_male,child_female]
# Swift Speech Driver Parameters
#speech-parameters sw:Name= # [voice,/path/to/voice]
# Theta Speech Driver Parameters
#speech-parameters th:Age= # [1-99,-1--99]
#speech-parameters th:Gender= # [male,female,neuter]
#speech-parameters th:Language= # [two-letter language code]
#speech-parameters th:Name= # [voice,/path/to/voice]
#speech-parameters th:Pitch=0.0 # [-2.0-2.0]
# ViaVoice Speech Driver Parameters
#speech-parameters vv:IniFile=/usr/lib/ViaVoiceTTS/eci.ini
#speech-parameters vv:SampleRate= # [8000,11025,22050]
#speech-parameters vv:AbbreviationMode= # [on,off]
#speech-parameters vv:NumberMode= # [word,year]
#speech-parameters vv:SynthMode= # [sentence,none]
#speech-parameters vv:TextMode= # [talk,spell,literal,phonetic]
#speech-parameters vv:Language= # [AmericanEnglish,BritishEnglish,CastilianSpanish,MexicanSpanish,StandardFrench,CanadianFrench,StandardGerman,StandardItalian,SimplifiedChinese,BrazilianPortuguese]
#speech-parameters vv:Voice= # [AdultMale,AdultFemale,Child,ElderlyFemale,ElderlyMale]
#speech-parameters vv:VocalTract= # [male,female]
#speech-parameters vv:Breathiness= # [0-100]
#speech-parameters vv:HeadSize= # [0-100]
#speech-parameters vv:PitchBaseline= # [0-100]
#speech-parameters vv:PitchFluctuation= # [0-100]
#speech-parameters vv:Roughness= # [0-100]
#####################
# Keyboard Settings #
#####################
# The keyboard-table directive specifies which keyboard table to use. Relative paths are
# anchored at "/etc/brltty/Keyboard". If not specified, no keyboard table is used.
# (can be overridden with the -k [--keyboard-table=] option)
#keyboard-table braille # bindings for braille keyboards
#keyboard-table desktop # bindings for full keyboards
#keyboard-table keypad # bindings for keypad-based navigation
#keyboard-table laptop # bindings for keyboards without a keypad
#keyboard-table sun_type6 # bindings for Sun Type 6 keyboards
# The keyboard-properties directive specifies which keyboards to monitor.
# If not specified, all keyboards are monitored.
# (can be overridden with the -K [--keyboard-properties=] option)
#keyboard-properties Type=any # [any,ps2,usb,bluetooth]
#keyboard-properties Vendor=0X0000 # [0X0000-0XFFFF]
#keyboard-properties Product=0X0000 # [0X0000-0XFFFF]
##################
# Sound Settings #
##################
# The pcm-device directive specifies the device to use for soundcard
# digital audio. If not specified, a method- and system-dependent
# default will be used.
# (can be overridden with the -p [--pcm-device=] option)
#pcm-device /path/to/device # most methods
#pcm-device pcm-handle-id # ALSA (see second parameter of snd_pcm_open)
# The midi-device directive specifies the device to use for the Musical
# Instrument Digital Interface. If not specified, a method- and
# system-dependent default will be used.
# (can be overridden with the -m [--midi-device=] option)
#midi-device /path/to/device # most methods
#midi-device client:port # ALSA (may use number or case-sensitive substring of name)
##########################
# Miscellaneous Settings #
##########################
# The preferences-file directive specifies the file in which to save the user's
# preferences. Relative paths are anchored at "/var/lib/brltty". If not
# specified, "brltty.prefs" will be used.
# (can be overridden with the -F [--preferences-file=] option)
#preferences-file brltty.prefs
# The log-level directive specifies the severity threshold for diagnostics
# written to the system log. Less severe diagnostics will not be logged. If not
# specified, "notice" will be used.
# (can be overridden with the -l [--log-level=] option)
#log-level emergency
#log-level alert
#log-level critical
#log-level error
#log-level warning
#log-level notice
#log-level information
#log-level debug
# The log-file directive specifies the file to which diagnostics are written.
# Relative paths are anchored at the current working directory. If not
# specified, diagnostics are written to the system log.
# (can be overridden with the -L [--log-file=] option)
#log-file /tmp/brltty.log
# The updatable-directory directive specifies the absolute path to a directory
# which contains files that can be updated (preferences, saved clipboard, etc).
# If not specified, "/var/lib/brltty" will be used.
# (can be overridden with the -U [--updatable-directory=] option)
#updatable-directory /var/lib/brltty
# The writable-directory directive specifies the absolute path to a directory
# which can be written to (creation of missing but needed resources, etc). If
# not specified, "/var/run/brltty" will be used.
# (can be overridden with the -W [--writable-directory=] option)
#writable-directory /var/run/brltty
# The drivers-directory directive specifies the absolute path to the
# directory which contains the dynamically loadable drivers. If not
# specified, /usr/lib64/brltty will be used.
# (can be overridden with the -D [--drivers-directory=] option)
#drivers-directory /usr/lib64/brltty
# The tables-directory directive specifies the absolute path to the directory
# which contains the text, attributes, contraction, keyboard, and input tables.
# If not specified, "/etc/brltty" will be used.
# (can be overridden with the -T [--tables-directory=] option)
#tables-directory /etc/brltty
################################################
# Application Programming Interface Parameters #
################################################
# The no-api directive disables the Application Programming Interface (API).
# (can be overridden with the -N [--no-api=] option)
#no-api off # [off,on]
# The api-parameters directive passes parameters to the Application
# Programming Interface.
# (can be overridden with the -A [--api-parameters=] option)
#api-parameters parameter=setting,...
#api-parameters Auth=keyfile:/etc/brlapi.key # Require authentication key
#api-parameters Auth=user:joe # Allow some local user
#api-parameters Auth=group:brl # Allow some local group
#api-parameters Host=:0 # Accept only local Unix connections
#api-parameters Host=0.0.0.0:0 # Accept any internet connection.
#api-parameters StackSize=65536
###########################
# Generic Screen Settings #
###########################
# The screen-driver directive specifies the two-letter driver
# identification code of the driver for the console screen.
# (can be overridden with the -x [--screen-driver=] option)
#screen-driver an # Android
#screen-driver as # AtSpi
#screen-driver a2 # AtSpi2
#screen-driver hd # Hurd
#screen-driver lx # Linux
#screen-driver pb # PCBIOS
#screen-driver sc # Screen
#screen-driver wn # Windows
############################
# Screen Driver Parameters #
############################
# The screen-parameters directive passes non-generic parameters through
# to the screen driver.
# (can be overridden with the -X [--screen-parameters=] option)
#screen-parameters driver:parameter=setting,...
# AtSpi Screen Driver Parameters
#screen-parameters as:Type=text+terminal # [text,terminal,all]+...
# AtSpi2 Screen Driver Parameters
#screen-parameters as:Release=yes # [yes,no]
#screen-parameters as:Type=text+terminal # [text,terminal,all]+...
# Linux Screen Driver Parameters
#screen-parameters lx:Charset=name+... # []
#screen-parameters lx:DebugSfm=no # [no,yes]
#screen-parameters lx:HFB=auto # [auto,vga,fb,0-7]
#screen-parameters lx:VT=0 # [0-63]
# Windows Screen Driver Parameters
#screen-parameters wn:Root=no # [no,yes]
#screen-parameters wn:FollowFocus=yes # [yes,no]
-------------- next part --------------
2015-12-01 at 16:20:29.043 [brltty] BRLTTY 5.2 rev unknown [http://brltty.com/]
2015-12-01 at 16:20:29.043 [brltty] lock descriptor allocated: queue-discarded-elements
2015-12-01 at 16:20:29.043 [brltty] Log Level: 7
2015-12-01 at 16:20:29.043 [brltty] pushed command environment: initial
2015-12-01 at 16:20:29.043 [brltty] report listener registered: 0: handleUpdateBrailleOnline
2015-12-01 at 16:20:29.043 [brltty] program exit event added: screen-data
2015-12-01 at 16:20:29.043 [brltty] Working Directory: /
2015-12-01 at 16:20:29.043 [brltty] Configuration File: /etc/brltty.conf
2015-12-01 at 16:20:29.043 [brltty] Updatable Directory: /var/lib/brltty
2015-12-01 at 16:20:29.043 [brltty] Preferences File: brltty.prefs
2015-12-01 at 16:20:29.043 [brltty] Writable Directory: /var/run/brltty
2015-12-01 at 16:20:29.043 [brltty] Drivers Directory: /usr/lib64/brltty
2015-12-01 at 16:20:29.043 [brltty] Tables Directory: /etc/brltty
2015-12-01 at 16:20:29.043 [brltty] program exit event added: tunes
2015-12-01 at 16:20:29.043 [brltty] tune thread state change: 0 -> 1
2015-12-01 at 16:20:29.044 [brltty] tune thread state change: 1 -> 3
2015-12-01 at 16:20:29.044 [brltty] regions: text=0.0 status=0.0
2015-12-01 at 16:20:29.044 [brltty] shifts: full=1 half=0 vertical=5
2015-12-01 at 16:20:29.044 [brltty] checking for text table: /etc/brltty/Text/en_US.ttb
2015-12-01 at 16:20:29.044 [brltty] compiling text table: /etc/brltty/Text/en_US.ttb
2015-12-01 at 16:20:29.044 [brltty] file opened: /etc/brltty/Text/en_US.ttb fd=8
2015-12-01 at 16:20:29.044 [brltty] including data file: /etc/brltty/Text/en_US.ttb
2015-12-01 at 16:20:29.044 [brltty] file opened: /etc/brltty/Text/ltr-latin.tti fd=9
2015-12-01 at 16:20:29.044 [brltty] including data file: /etc/brltty/Text/ltr-latin.tti
2015-12-01 at 16:20:29.044 [brltty] file opened: /etc/brltty/Text/ltr-alias.tti fd=10
2015-12-01 at 16:20:29.044 [brltty] including data file: /etc/brltty/Text/ltr-alias.tti
2015-12-01 at 16:20:29.047 [brltty] file opened: /etc/brltty/Text/ctl-latin.tti fd=9
2015-12-01 at 16:20:29.047 [brltty] including data file: /etc/brltty/Text/ctl-latin.tti
2015-12-01 at 16:20:29.048 [brltty] file opened: /etc/brltty/Text/num-nemeth.tti fd=9
2015-12-01 at 16:20:29.048 [brltty] including data file: /etc/brltty/Text/num-nemeth.tti
2015-12-01 at 16:20:29.048 [brltty] file opened: /etc/brltty/Text/num-alias.tti fd=10
2015-12-01 at 16:20:29.048 [brltty] including data file: /etc/brltty/Text/num-alias.tti
2015-12-01 at 16:20:29.049 [brltty] file opened: /etc/brltty/Text/common.tti fd=9
2015-12-01 at 16:20:29.049 [brltty] including data file: /etc/brltty/Text/common.tti
2015-12-01 at 16:20:29.049 [brltty] file opened: /etc/brltty/Text/spaces.tti fd=10
2015-12-01 at 16:20:29.049 [brltty] including data file: /etc/brltty/Text/spaces.tti
2015-12-01 at 16:20:29.049 [brltty] file opened: /etc/brltty/Text/boxes.tti fd=10
2015-12-01 at 16:20:29.049 [brltty] including data file: /etc/brltty/Text/boxes.tti
2015-12-01 at 16:20:29.050 [brltty] file opened: /etc/brltty/Text/blocks.tti fd=10
2015-12-01 at 16:20:29.050 [brltty] including data file: /etc/brltty/Text/blocks.tti
2015-12-01 at 16:20:29.050 [brltty] Text Table: en_US
2015-12-01 at 16:20:29.050 [brltty] program exit event added: text-table
2015-12-01 at 16:20:29.050 [brltty] Attributes Table: left_right
2015-12-01 at 16:20:29.050 [brltty] program exit event added: attributes-table
2015-12-01 at 16:20:29.050 [brltty] program exit event added: contraction-table
2015-12-01 at 16:20:29.050 [brltty] Contraction Table: none
2015-12-01 at 16:20:29.050 [brltty] Keyboard Property: type=
2015-12-01 at 16:20:29.050 [brltty] Keyboard Property: vendor=
2015-12-01 at 16:20:29.050 [brltty] Keyboard Property: product=
2015-12-01 at 16:20:29.050 [brltty] program exit event added: keyboard-table
2015-12-01 at 16:20:29.050 [brltty] Keyboard Table: none
2015-12-01 at 16:20:29.050 [brltty] program exit event added: screen-driver
2015-12-01 at 16:20:29.050 [brltty] activity action request: screen-driver: start
2015-12-01 at 16:20:29.050 [brltty] activity state change: screen-driver: 4[preparing]
2015-12-01 at 16:20:29.050 [brltty] activity state change: screen-driver: 1[prepared]
2015-12-01 at 16:20:29.050 [brltty] activity state change: screen-driver: 2[scheduled]
2015-12-01 at 16:20:29.050 [brltty] BrlAPI Server: release 0.6.3
2015-12-01 at 16:20:29.050 [brltty] API Parameter: auth=
2015-12-01 at 16:20:29.050 [brltty] API Parameter: host=
2015-12-01 at 16:20:29.050 [brltty] API Parameter: stacksize=
2015-12-01 at 16:20:29.050 [brltty] program exit event added: address-table
2015-12-01 at 16:20:29.050 [brltty] program exit event added: api-server
2015-12-01 at 16:20:29.050 [brltty] program exit event added: braille-data
2015-12-01 at 16:20:29.050 [brltty] program exit event added: braille-driver
2015-12-01 at 16:20:29.050 [brltty] activity action request: braille-driver: start
2015-12-01 at 16:20:29.050 [brltty] activity state change: braille-driver: 4[preparing]
2015-12-01 at 16:20:29.050 [brltty] Braille Display Dimensions: 1 row, 1 column
2015-12-01 at 16:20:29.050 [brltty] regions: text=0.1 status=0.0
2015-12-01 at 16:20:29.050 [brltty] shifts: full=1 half=0 vertical=5
2015-12-01 at 16:20:29.050 [brltty] activity state change: braille-driver: 1[prepared]
2015-12-01 at 16:20:29.050 [brltty] activity state change: braille-driver: 2[scheduled]
2015-12-01 at 16:20:29.050 [brltty] program exit event added: speech-data
2015-12-01 at 16:20:29.050 [brltty] program exit event added: speech-driver
2015-12-01 at 16:20:29.050 [brltty] activity action request: speech-driver: start
2015-12-01 at 16:20:29.050 [brltty] activity state change: speech-driver: 4[preparing]
2015-12-01 at 16:20:29.050 [brltty] activity state change: speech-driver: 1[prepared]
2015-12-01 at 16:20:29.050 [brltty] activity state change: speech-driver: 2[scheduled]
2015-12-01 at 16:20:29.051 [brltty] Speech Input: none
2015-12-01 at 16:20:29.051 [brltty] feature not supported: service ready notification
2015-12-01 at 16:20:29.051 [brltty] program exit event added: sessions
2015-12-01 at 16:20:29.051 [brltty] pushed command environment: main
2015-12-01 at 16:20:29.051 [brltty] pushed command handler: unhandled
2015-12-01 at 16:20:29.051 [brltty] pushed command handler: miscellaneous
2015-12-01 at 16:20:29.051 [brltty] pushed command handler: learn
2015-12-01 at 16:20:29.051 [brltty] pushed command handler: speech
2015-12-01 at 16:20:29.051 [brltty] pushed command handler: clipboard
2015-12-01 at 16:20:29.051 [brltty] pushed command handler: preferences
2015-12-01 at 16:20:29.051 [brltty] pushed command handler: toggle
2015-12-01 at 16:20:29.051 [brltty] report listener registered: 3: brailleWindowUpdatedListener
2015-12-01 at 16:20:29.051 [brltty] pushed command handler: touch
2015-12-01 at 16:20:29.051 [brltty] report listener registered: 0: keycodeCommandDataResetListener
2015-12-01 at 16:20:29.051 [brltty] pushed command handler: keycodes
2015-12-01 at 16:20:29.051 [brltty] report listener registered: 0: inputCommandDataResetListener
2015-12-01 at 16:20:29.051 [brltty] pushed command handler: input
2015-12-01 at 16:20:29.051 [brltty] pushed command handler: navigation
2015-12-01 at 16:20:29.051 [brltty] pushed command handler: screen
2015-12-01 at 16:20:29.051 [brltty] pushed command handler: custom
2015-12-01 at 16:20:29.051 [brltty] pushed command handler: API
2015-12-01 at 16:20:29.051 [brltty] activity state change: screen-driver: 6[starting]
2015-12-01 at 16:20:29.051 [brltty] checking for screen driver: lx
2015-12-01 at 16:20:29.051 [brltty] initializing screen driver: lx
2015-12-01 at 16:20:29.051 [brltty] device directory: /dev
2015-12-01 at 16:20:29.051 [brltty] checking screen device: /dev/vcsa
2015-12-01 at 16:20:29.051 [brltty] screen device: vcsa
2015-12-01 at 16:20:29.051 [brltty] checking console device: /dev/tty0
2015-12-01 at 16:20:29.051 [brltty] console device: tty0
2015-12-01 at 16:20:29.051 [brltty] device opened: /dev/vcsa: fd=12
2015-12-01 at 16:20:29.051 [brltty] device opened: /dev/tty0: fd=13
2015-12-01 at 16:20:29.051 [brltty] starting host command: /sbin/modprobe -q uinput
2015-12-01 at 16:20:29.053 [brltty] host command exit status: 0: /sbin/modprobe
2015-12-01 at 16:20:29.053 [brltty] activity state change: braille-driver: 6[starting]
2015-12-01 at 16:20:29.053 [brltty] checking braille device: usb:
2015-12-01 at 16:20:29.053 [brltty] performing braille driver autodetection
2015-12-01 at 16:20:29.053 [brltty] checking for braille driver: al
2015-12-01 at 16:20:29.053 [brltty] initializing braille driver: al -> usb:
2015-12-01 at 16:20:29.127 [brltty] braille driver initialization failed: al -> usb:
2015-12-01 at 16:20:29.127 [brltty] checking for braille driver: bm
2015-12-01 at 16:20:29.127 [brltty] initializing braille driver: bm -> usb:
2015-12-01 at 16:20:29.204 [brltty] USB: Manufacturer Name: HumanWare
2015-12-01 at 16:20:29.206 [brltty] USB: Product Description: Brailliant 40
2015-12-01 at 16:20:29.207 [brltty] USB: Serial Number: 25000072
2015-12-01 at 16:20:29.208 [brltty] program exit event added: sorted-usb-serial-adapters
2015-12-01 at 16:20:29.208 [brltty] probing with Baum Escape protocol
2015-12-01 at 16:20:29.212 [brltty] activity state change: speech-driver: 6[starting]
2015-12-01 at 16:20:29.212 [brltty] no autodetectable speech drivers
2015-12-01 at 16:20:29.212 [brltty] checking for speech driver: no
2015-12-01 at 16:20:29.212 [brltty] initializing speech driver: no
2015-12-01 at 16:20:29.212 [brltty] Speech Driver: no [NoSpeech]
2015-12-01 at 16:20:29.212 [brltty] NoSpeech Speech Driver:
2015-12-01 at 16:20:29.212 [brltty] activity state change: speech-driver: 3[started]
2015-12-01 at 16:20:29.240 [brltty] Baum Serial Number: 25041572
2015-12-01 at 16:20:29.256 [brltty] Baum Device Identity: HWG Brailliant40
2015-12-01 at 16:20:29.256 [brltty] Cell Count: 40 (40 text, 0 status)
2015-12-01 at 16:20:29.256 [brltty] Braille Display Dimensions: 1 row, 40 columns
2015-12-01 at 16:20:29.256 [brltty] regions: text=0.40 status=0.0
2015-12-01 at 16:20:29.256 [brltty] shifts: full=40 half=20 vertical=5
2015-12-01 at 16:20:29.256 [brltty] Key Bindings: sv
2015-12-01 at 16:20:29.256 [brltty] program exit event added: sorted-command-table
2015-12-01 at 16:20:29.256 [brltty] file opened: /etc/brltty/Input/bm/sv.ktb fd=21
2015-12-01 at 16:20:29.257 [brltty] including data file: /etc/brltty/Input/bm/sv.ktb
2015-12-01 at 16:20:29.257 [brltty] file opened: /etc/brltty/Input/bm/display6.kti fd=22
2015-12-01 at 16:20:29.257 [brltty] including data file: /etc/brltty/Input/bm/display6.kti
2015-12-01 at 16:20:29.257 [brltty] file opened: /etc/brltty/Input/bm/d6.kti fd=23
2015-12-01 at 16:20:29.257 [brltty] including data file: /etc/brltty/Input/bm/d6.kti
2015-12-01 at 16:20:29.257 [brltty] file opened: /etc/brltty/Input/bm/routing6.kti fd=22
2015-12-01 at 16:20:29.257 [brltty] including data file: /etc/brltty/Input/bm/routing6.kti
2015-12-01 at 16:20:29.258 [brltty] Key Table: /etc/brltty/Input/bm/sv.ktb
2015-12-01 at 16:20:29.258 [brltty] constructing special screen: help
2015-12-01 at 16:20:30.273 [brltty] input byte missing at offset 0
2015-12-01 at 16:20:30.273 [brltty] Partial Packet: 50 02
2015-12-01 at 16:20:30.273 [brltty] report listener registered: 0: brlapi_handleReports
2015-12-01 at 16:20:30.273 [brltty] Braille Driver: bm [Baum]
2015-12-01 at 16:20:30.273 [brltty] Baum Braille Driver:
2015-12-01 at 16:20:30.273 [brltty] Braille Parameter: protocol=
2015-12-01 at 16:20:30.273 [brltty] Braille Parameter: variokeys=
2015-12-01 at 16:20:30.273 [brltty] Braille Device: usb:
2015-12-01 at 16:20:30.273 [brltty] Old Preferences File: /etc/brltty-bm.prefs
2015-12-01 at 16:20:30.273 [brltty] cannot open file: /etc/brltty-bm.prefs: No such file or directory
2015-12-01 at 16:20:30.274 [brltty] regions: text=0.40 status=0.0
2015-12-01 at 16:20:30.274 [brltty] shifts: full=40 half=20 vertical=5
2015-12-01 at 16:20:30.274 [brltty] activity state change: braille-driver: 3[started]
2015-12-01 at 16:20:30.274 [brltty] checking uinput device: /dev/uinput
2015-12-01 at 16:20:30.274 [brltty] uinput device: uinput
2015-12-01 at 16:20:30.274 [brltty] device opened: /dev/uinput: fd=21
2015-12-01 at 16:20:30.274 [tune-thread] starting host command: /sbin/modprobe -q pcspkr
2015-12-01 at 16:20:30.274 [brltty] uinput opened: uinput fd=21
2015-12-01 at 16:20:30.275 [brltty] report listener registered: 1: lxBrailleOfflineListener
2015-12-01 at 16:20:30.275 [brltty] Screen Driver: lx [Linux]
2015-12-01 at 16:20:30.275 [brltty] Linux Screen Driver:
2015-12-01 at 16:20:30.275 [brltty] Screen Parameter: charset=
2015-12-01 at 16:20:30.275 [brltty] Screen Parameter: debugsfm=
2015-12-01 at 16:20:30.275 [brltty] Screen Parameter: hfb=
2015-12-01 at 16:20:30.275 [brltty] Screen Parameter: vt=
2015-12-01 at 16:20:30.275 [brltty] activity state change: screen-driver: 3[started]
2015-12-01 at 16:20:30.275 [brltty] report listener unregistered: 0: brlapi_handleReports
2015-12-01 at 16:20:30.275 [brltty] pushed command environment: message
2015-12-01 at 16:20:30.275 [brltty] pushed command handler: message
2015-12-01 at 16:20:30.278 [tune-thread] host command exit status: 0: /sbin/modprobe
2015-12-01 at 16:20:30.278 [tune-thread] console opened: fd=22
2015-12-01 at 16:20:30.278 [tune-thread] program exit event added: console-stream
2015-12-01 at 16:20:30.278 [tune-thread] beeper enabled
2015-12-01 at 16:20:30.278 [tune-thread] tone: MSecs:60 Freq:329
2015-12-01 at 16:20:30.339 [tune-thread] tone: MSecs:100 Freq:440
2015-12-01 at 16:20:32.340 [tune-thread] beeper disabled
2015-12-01 at 16:20:34.277 [brltty] popped command handler: message
2015-12-01 at 16:20:34.277 [brltty] popped command environment: message
2015-12-01 at 16:20:34.277 [brltty] report listener registered: 0: brlapi_handleReports
2015-12-01 at 16:20:34.277 [brltty] stopping program components
2015-12-01 at 16:20:34.277 [brltty] stopping program component: console-stream
2015-12-01 at 16:20:34.277 [brltty] stopping program component: sorted-command-table
2015-12-01 at 16:20:34.277 [brltty] stopping program component: sorted-usb-serial-adapters
2015-12-01 at 16:20:34.278 [brltty] stopping program component: sessions
2015-12-01 at 16:20:34.278 [brltty] popped command handler: API
2015-12-01 at 16:20:34.278 [brltty] popped command handler: custom
2015-12-01 at 16:20:34.278 [brltty] popped command handler: screen
2015-12-01 at 16:20:34.278 [brltty] popped command handler: navigation
2015-12-01 at 16:20:34.278 [brltty] popped command handler: input
2015-12-01 at 16:20:34.278 [brltty] report listener unregistered: 0: inputCommandDataResetListener
2015-12-01 at 16:20:34.278 [brltty] popped command handler: keycodes
2015-12-01 at 16:20:34.278 [brltty] report listener unregistered: 0: keycodeCommandDataResetListener
2015-12-01 at 16:20:34.278 [brltty] popped command handler: touch
2015-12-01 at 16:20:34.278 [brltty] report listener unregistered: 3: brailleWindowUpdatedListener
2015-12-01 at 16:20:34.278 [brltty] popped command handler: toggle
2015-12-01 at 16:20:34.278 [brltty] popped command handler: preferences
2015-12-01 at 16:20:34.278 [brltty] popped command handler: clipboard
2015-12-01 at 16:20:34.278 [brltty] popped command handler: speech
2015-12-01 at 16:20:34.278 [brltty] popped command handler: learn
2015-12-01 at 16:20:34.278 [brltty] popped command handler: miscellaneous
2015-12-01 at 16:20:34.278 [brltty] popped command handler: unhandled
2015-12-01 at 16:20:34.278 [brltty] popped command environment: main
2015-12-01 at 16:20:34.278 [brltty] stopping program component: speech-driver
2015-12-01 at 16:20:34.278 [brltty] activity action request: speech-driver: stop
2015-12-01 at 16:20:34.278 [brltty] activity state change: speech-driver: 9[stopping]
2015-12-01 at 16:20:34.278 [brltty] activity state change: speech-driver: 0[stopped]
2015-12-01 at 16:20:34.278 [brltty] stopping program component: speech-data
2015-12-01 at 16:20:34.278 [brltty] stopping program component: braille-driver
2015-12-01 at 16:20:34.278 [brltty] report listener unregistered: 0: brlapi_handleReports
2015-12-01 at 16:20:34.278 [brltty] pushed command environment: message
2015-12-01 at 16:20:34.278 [brltty] pushed command handler: message
2015-12-01 at 16:20:34.302 [brltty] popped command handler: message
2015-12-01 at 16:20:34.302 [brltty] popped command environment: message
2015-12-01 at 16:20:34.302 [brltty] report listener registered: 0: brlapi_handleReports
2015-12-01 at 16:20:34.302 [brltty] activity action request: braille-driver: stop
2015-12-01 at 16:20:34.302 [brltty] activity state change: braille-driver: 9[stopping]
2015-12-01 at 16:20:34.302 [brltty] report listener unregistered: 0: brlapi_handleReports
2015-12-01 at 16:20:34.305 [brltty] activity state change: braille-driver: 0[stopped]
2015-12-01 at 16:20:34.306 [brltty] stopping program component: braille-data
2015-12-01 at 16:20:34.306 [brltty] stopping program component: api-server
2015-12-01 at 16:20:34.306 [tune-thread] console opened: fd=14
2015-12-01 at 16:20:34.306 [tune-thread] program exit event added: console-stream
2015-12-01 at 16:20:34.306 [tune-thread] beeper enabled
2015-12-01 at 16:20:34.306 [server-main] select: Interrupted system call
2015-12-01 at 16:20:34.306 [tune-thread] tone: MSecs:60 Freq:329
2015-12-01 at 16:20:34.306 [brltty] stopping program component: console-stream
2015-12-01 at 16:20:34.306 [brltty] stopping program component: address-table
2015-12-01 at 16:20:34.306 [brltty] stopping program component: screen-driver
2015-12-01 at 16:20:34.306 [brltty] activity action request: screen-driver: stop
2015-12-01 at 16:20:34.306 [brltty] activity state change: screen-driver: 9[stopping]
2015-12-01 at 16:20:34.318 [brltty] report listener unregistered: 1: lxBrailleOfflineListener
2015-12-01 at 16:20:34.351 [brltty] activity state change: screen-driver: 0[stopped]
2015-12-01 at 16:20:34.351 [brltty] stopping program component: keyboard-table
2015-12-01 at 16:20:34.351 [brltty] stopping program component: contraction-table
2015-12-01 at 16:20:34.351 [brltty] stopping program component: attributes-table
2015-12-01 at 16:20:34.351 [brltty] stopping program component: text-table
2015-12-01 at 16:20:34.351 [brltty] stopping program component: tunes
2015-12-01 at 16:20:34.366 [tune-thread] console opened: fd=8
2015-12-01 at 16:20:34.366 [tune-thread] program exit event added: console-stream
2015-12-01 at 16:20:34.366 [tune-thread] tone: MSecs:60 Freq:220
2015-12-01 at 16:20:34.426 [tune-thread] beeper disabled
2015-12-01 at 16:20:34.426 [tune-thread] tune thread state change: 3 -> 4
2015-12-01 at 16:20:34.427 [brltty] tune thread state change: 4 -> 5
2015-12-01 at 16:20:34.427 [brltty] stopping program component: console-stream
2015-12-01 at 16:20:34.427 [brltty] stopping program component: screen-data
2015-12-01 at 16:20:34.427 [brltty] destructing special screen: help
2015-12-01 at 16:20:34.427 [brltty] stopping program component: log
More information about the BRLTTY
mailing list