[BRLTTY] no input from braille keys under some conditions

[Michael Katzmann]

No, the space bar and the braille buttons are unresponsive until brltty is
restarted. Only the control and routing keys seem to be active.
It looks like only those codes with a high bit set eg: (code=20000001)
not (code=20) as reported by brlapitest

On Thu, Jul 28, 2016 at 9:13 PM, Dave Mielke <dave at mielke.cc> wrote:

> [quoted lines by Michael Katzmann on 2016/07/28 at 19:32 -0400]
>
> >I also tried a Refreshabraille 18 and it behaved the same, so it is not
> >specific to the Brailiant. The braille keys on the Refreshabraille only
> >worked after restarting brltty (control and routing keys were OK from the
> >get-go .. just like the Brailliant)
> >It looks as if it is an issue with brltty, the configuration or it's
> >interaction with linux.
>
> Since the Refreshabraille is using a different driver, yes, it has to be a
> more
> general issue. Does the space bar work?
>
> --
> Dave Mielke           | 2213 Fox Crescent | The Bible is the very Word of
> God.
> Phone: 1-613-726-0014 | Ottawa, Ontario   | http://Mielke.cc/bible/
> EMail: Dave at Mielke.cc | Canada  K2A 1H7   | http://FamilyRadio.org/
> _______________________________________________
> This message was sent via the BRLTTY mailing list.
> To post a message, send an e-mail to: BRLTTY at mielke.cc
> For general information, go to: http://mielke.cc/mailman/listinfo/brltty
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mielke.cc/pipermail/brltty/attachments/20160728/850469ca/attachment.html>