[BRLTTY] preference setting problem

[高生旺]

Log file attached. Many thanks your help.

On Wed, 5 Oct 2016, Dave Mielke wrote:

> Date: Wed, 5 Oct 2016 23:41:59
> From: Dave Mielke <dave at mielke.cc>
> Reply-To: Informal discussion between users and developers of BRLTTY.
>     <brltty at mielke.cc>
> To: Informal discussion between users and developers of BRLTTY.
>     <brltty at mielke.cc>
> Subject: Re: [BRLTTY] preference setting problem
> 
> [quoted lines by 高生旺 on 2016/10/05 at 22:03 +0800]
>
>>> Am I understanding corerectly, then, that the settings are being
>>> saved but probably aren't being restored on reboot?
>> You're right.
>
> What happens if you tell brltty to load the preferences after the system is 
> fully up?
>
> Then we need a debug log for what's happening during the reboot. Try adding 
> lines like these to your brltty.conf file:
>
>   log-file /path/to/logfile
>   log-level debug
>
> My personal guess is that brltty is starting before /var is mounted. Is /var in 
> a different partition?
>
> -- 
> Dave Mielke           | 2213 Fox Crescent | The Bible is the very Word of God.
> Phone: 1-613-726-0014 | Ottawa, Ontario   | http://Mielke.cc/bible/
> EMail: Dave at Mielke.cc | Canada  K2A 1H7   | http://FamilyRadio.org/
> _______________________________________________
> This message was sent via the BRLTTY mailing list.
> To post a message, send an e-mail to: BRLTTY at mielke.cc
> For general information, go to: http://mielke.cc/mailman/listinfo/brltty
-------------- next part --------------
2016-10-06 at 13:25:28.596 [brltty] BRLTTY 5.4 rev BRLTTY-5.4 [http://brltty.com/]
2016-10-06 at 13:25:28.597 [brltty] lock descriptor allocated: queue-discarded-elements
2016-10-06 at 13:25:28.597 [brltty] 記錄等級: debug
2016-10-06 at 13:25:28.597 [brltty] pushed command environment: initial
2016-10-06 at 13:25:28.597 [brltty] report listener registered: 0: handleUpdateBrailleOnline
2016-10-06 at 13:25:28.599 [brltty] program exit event added: screen-data
2016-10-06 at 13:25:28.599 [brltty] 工作目錄: /home/coscell
2016-10-06 at 13:25:28.599 [brltty] 設定檔: /etc/brltty.conf
2016-10-06 at 13:25:28.599 [brltty] 可更新的目錄: /var/lib/brltty
2016-10-06 at 13:25:28.599 [brltty] 偏好檔案: brltty.prefs
2016-10-06 at 13:25:28.599 [brltty] 寫入的目錄: /var/run/brltty
2016-10-06 at 13:25:28.599 [brltty] 驅動程式目錄: /lib/brltty
2016-10-06 at 13:25:28.599 [brltty] 對照表目錄: /etc/brltty
2016-10-06 at 13:25:28.599 [brltty] file opened: /var/lib/brltty/brltty.prefs fd=4
2016-10-06 at 13:25:28.599 [brltty] file opened: /var/lib/brltty/brltty.prefs fd=4
2016-10-06 at 13:25:28.599 [brltty] starting host command: /sbin/modprobe -q uinput
2016-10-06 at 13:25:28.601 [brltty] host command exit status: 0: /sbin/modprobe
2016-10-06 at 13:25:29.101 [brltty] device directory: /dev
2016-10-06 at 13:25:29.101 [brltty] checking uinput device: /dev/uinput
2016-10-06 at 13:25:29.101 [brltty] uinput device: uinput
2016-10-06 at 13:25:29.101 [brltty] device opened: /dev/uinput: fd=4
2016-10-06 at 13:25:29.101 [brltty] uinput opened: uinput fd=4
2016-10-06 at 13:25:29.105 [brltty] input event monitor opened: fd=4
2016-10-06 at 13:25:29.105 [brltty] checking uinput device: /dev/uinput
2016-10-06 at 13:25:29.106 [brltty] uinput device: uinput
2016-10-06 at 13:25:29.106 [brltty] device opened: /dev/uinput: fd=5
2016-10-06 at 13:25:29.106 [brltty] uinput opened: uinput fd=5
2016-10-06 at 13:25:29.112 [brltty] input event monitor opened: fd=5
2016-10-06 at 13:25:29.112 [brltty] program exit event added: tunes
2016-10-06 at 13:25:29.112 [brltty] tune thread state change: 0 -> 1
2016-10-06 at 13:25:29.112 [brltty] tune thread state change: 1 -> 3
2016-10-06 at 13:25:29.112 [brltty] regions: text=0.0 status=0.0
2016-10-06 at 13:25:29.112 [brltty] shifts: full=1 half=0 vertical=5
2016-10-06 at 13:25:29.112 [brltty] checking for text table: /etc/brltty/Text/zh_TW.ttb
2016-10-06 at 13:25:29.112 [brltty] checking for text table: /etc/brltty/Text/zh.ttb
2016-10-06 at 13:25:29.112 [brltty] 文字表: en-nabcc
2016-10-06 at 13:25:29.112 [brltty] program exit event added: text-table
2016-10-06 at 13:25:29.112 [brltty] 屬性表: left_right
2016-10-06 at 13:25:29.112 [brltty] program exit event added: attributes-table
2016-10-06 at 13:25:29.112 [brltty] program exit event added: contraction-table
2016-10-06 at 13:25:29.112 [brltty] 縮寫表: 沒有
2016-10-06 at 13:25:29.112 [brltty] Keyboard Property: type=
2016-10-06 at 13:25:29.112 [brltty] Keyboard Property: vendor=
2016-10-06 at 13:25:29.112 [brltty] Keyboard Property: product=
2016-10-06 at 13:25:29.112 [brltty] program exit event added: keyboard-table
2016-10-06 at 13:25:29.112 [brltty] 按鍵表: 沒有
2016-10-06 at 13:25:29.112 [brltty] program exit event added: screen-driver
2016-10-06 at 13:25:29.112 [brltty] activity action request: screen-driver: start
2016-10-06 at 13:25:29.112 [brltty] activity state change: screen-driver: 4[preparing]
2016-10-06 at 13:25:29.112 [brltty] activity state change: screen-driver: 1[prepared]
2016-10-06 at 13:25:29.112 [brltty] activity state change: screen-driver: 2[scheduled]
2016-10-06 at 13:25:29.112 [brltty] BrlAPI Server: release 0.6.5
2016-10-06 at 13:25:29.112 [brltty] API 參數: auth=
2016-10-06 at 13:25:29.112 [brltty] API 參數: host=
2016-10-06 at 13:25:29.112 [brltty] API 參數: stacksize=
2016-10-06 at 13:25:29.112 [brltty] program exit event added: address-table
2016-10-06 at 13:25:29.112 [brltty] program exit event added: api-server
2016-10-06 at 13:25:29.112 [brltty] program exit event added: braille-data
2016-10-06 at 13:25:29.112 [brltty] program exit event added: braille-driver
2016-10-06 at 13:25:29.113 [brltty] activity action request: braille-driver: start
2016-10-06 at 13:25:29.113 [brltty] activity state change: braille-driver: 4[preparing]
2016-10-06 at 13:25:29.113 [brltty] Braille Display Dimensions: 1 row, 1 column
2016-10-06 at 13:25:29.113 [brltty] regions: text=0.1 status=0.0
2016-10-06 at 13:25:29.113 [brltty] shifts: full=1 half=0 vertical=5
2016-10-06 at 13:25:29.113 [brltty] activity state change: braille-driver: 1[prepared]
2016-10-06 at 13:25:29.113 [brltty] activity state change: braille-driver: 2[scheduled]
2016-10-06 at 13:25:29.113 [brltty] program exit event added: speech-data
2016-10-06 at 13:25:29.113 [brltty] program exit event added: speech-driver
2016-10-06 at 13:25:29.113 [brltty] activity action request: speech-driver: start
2016-10-06 at 13:25:29.113 [brltty] activity state change: speech-driver: 4[preparing]
2016-10-06 at 13:25:29.113 [brltty] activity state change: speech-driver: 1[prepared]
2016-10-06 at 13:25:29.113 [brltty] activity state change: speech-driver: 2[scheduled]
2016-10-06 at 13:25:29.113 [brltty] 語音輸入: 沒有
2016-10-06 at 13:25:29.113 [brltty] program exit event added: sessions
2016-10-06 at 13:25:29.113 [brltty] pushed command environment: main
2016-10-06 at 13:25:29.113 [brltty] pushed command handler: unhandled
2016-10-06 at 13:25:29.113 [brltty] pushed command handler: miscellaneous
2016-10-06 at 13:25:29.113 [brltty] pushed command handler: learn
2016-10-06 at 13:25:29.113 [brltty] pushed command handler: speech
2016-10-06 at 13:25:29.113 [brltty] pushed command handler: clipboard
2016-10-06 at 13:25:29.113 [brltty] pushed command handler: preferences
2016-10-06 at 13:25:29.113 [brltty] pushed command handler: toggle
2016-10-06 at 13:25:29.113 [brltty] report listener registered: 3: brailleWindowUpdatedListener
2016-10-06 at 13:25:29.113 [brltty] pushed command handler: touch
2016-10-06 at 13:25:29.113 [brltty] report listener registered: 0: keycodeCommandDataResetListener
2016-10-06 at 13:25:29.113 [brltty] pushed command handler: keycodes
2016-10-06 at 13:25:29.113 [brltty] report listener registered: 0: inputCommandDataResetListener
2016-10-06 at 13:25:29.113 [brltty] pushed command handler: input
2016-10-06 at 13:25:29.113 [brltty] pushed command handler: navigation
2016-10-06 at 13:25:29.113 [brltty] pushed command handler: screen
2016-10-06 at 13:25:29.113 [brltty] pushed command handler: custom
2016-10-06 at 13:25:29.113 [brltty] pushed command handler: API
2016-10-06 at 13:25:29.113 [brltty] activity state change: screen-driver: 6[starting]
2016-10-06 at 13:25:29.113 [brltty] checking for screen driver: lx
2016-10-06 at 13:25:29.113 [brltty] initializing screen driver: lx
2016-10-06 at 13:25:29.113 [brltty] checking screen device: /dev/vcsa
2016-10-06 at 13:25:29.113 [brltty] screen device: vcsa
2016-10-06 at 13:25:29.113 [brltty] checking console device: /dev/tty0
2016-10-06 at 13:25:29.113 [brltty] console device: tty0
2016-10-06 at 13:25:29.113 [brltty] device opened: /dev/tty1: fd=12
2016-10-06 at 13:25:29.113 [brltty] device opened: /dev/vcsa: fd=13
2016-10-06 at 13:25:29.113 [brltty] checking uinput device: /dev/uinput
2016-10-06 at 13:25:29.113 [brltty] uinput device: uinput
2016-10-06 at 13:25:29.113 [brltty] device opened: /dev/uinput: fd=14
2016-10-06 at 13:25:29.113 [brltty] uinput opened: uinput fd=14
2016-10-06 at 13:25:29.120 [brltty] report listener registered: 1: lxBrailleOfflineListener
2016-10-06 at 13:25:29.120 [brltty] 螢幕驅動: lx [Linux]
2016-10-06 at 13:25:29.120 [brltty] Linux Screen Driver:
2016-10-06 at 13:25:29.120 [brltty] 螢幕參數: charset=utf8+big5
2016-10-06 at 13:25:29.120 [brltty] 螢幕參數: debugsfm=
2016-10-06 at 13:25:29.120 [brltty] 螢幕參數: hfb=
2016-10-06 at 13:25:29.120 [brltty] 螢幕參數: vt=
2016-10-06 at 13:25:29.120 [brltty] activity state change: screen-driver: 3[started]
2016-10-06 at 13:25:29.120 [brltty] activity state change: braille-driver: 6[starting]
2016-10-06 at 13:25:29.120 [brltty] checking braille device: usb:
2016-10-06 at 13:25:29.120 [brltty] performing braille driver autodetection
2016-10-06 at 13:25:29.120 [brltty] checking for braille driver: al
2016-10-06 at 13:25:29.120 [brltty] initializing braille driver: al -> usb:
2016-10-06 at 13:25:29.121 [brltty] 點字驅動出使化失敗: al -> usb:
2016-10-06 at 13:25:29.121 [brltty] checking for braille driver: bm
2016-10-06 at 13:25:29.121 [brltty] initializing braille driver: bm -> usb:
2016-10-06 at 13:25:29.121 [brltty] 點字驅動出使化失敗: bm -> usb:
2016-10-06 at 13:25:29.121 [brltty] checking for braille driver: eu
2016-10-06 at 13:25:29.121 [brltty] initializing braille driver: eu -> usb:
2016-10-06 at 13:25:29.121 [brltty] 點字驅動出使化失敗: eu -> usb:
2016-10-06 at 13:25:29.121 [brltty] checking for braille driver: fs
2016-10-06 at 13:25:29.121 [brltty] initializing braille driver: fs -> usb:
2016-10-06 at 13:25:29.126 [brltty] USB: Manufacturer Name: Freedom Scientific
2016-10-06 at 13:25:29.127 [brltty] USB: Product Description: Focus 3
2016-10-06 at 13:25:29.127 [brltty] USB: Serial Number: 0123456
2016-10-06 at 13:25:29.128 [brltty] program exit event added: sorted-usb-serial-adapters
2016-10-06 at 13:25:29.128 [brltty] activity state change: speech-driver: 6[starting]
2016-10-06 at 13:25:29.128 [brltty] no autodetectable speech drivers
2016-10-06 at 13:25:29.128 [brltty] checking for speech driver: no
2016-10-06 at 13:25:29.128 [brltty] initializing speech driver: no
2016-10-06 at 13:25:29.128 [brltty] device opened: /dev/tty0: fd=22
2016-10-06 at 13:25:29.128 [brltty] 語音驅動: no [NoSpeech]
2016-10-06 at 13:25:29.128 [brltty] NoSpeech Speech Driver:
2016-10-06 at 13:25:29.128 [brltty] activity state change: speech-driver: 3[started]
2016-10-06 at 13:25:29.129 [brltty] Detected Focus 40: cells=40, firmware=5.71
2016-10-06 at 13:25:29.129 [brltty] Manufacturer: FREEDOM SCIENTIFIC
2016-10-06 at 13:25:29.129 [brltty] Model: Focus 40
2016-10-06 at 13:25:29.129 [brltty] Firmware: 5.71
2016-10-06 at 13:25:29.129 [brltty] Braille Display Dimensions: 1 row, 40 columns
2016-10-06 at 13:25:29.129 [brltty] regions: text=0.40 status=0.0
2016-10-06 at 13:25:29.129 [brltty] shifts: full=40 half=20 vertical=5
2016-10-06 at 13:25:29.129 [brltty] 按鍵設定: focus_small
2016-10-06 at 13:25:29.129 [brltty] program exit event added: sorted-command-table
2016-10-06 at 13:25:29.129 [brltty] file opened: /etc/brltty/Input/fs/focus_small.ktb fd=25
2016-10-06 at 13:25:29.129 [brltty] including data file: /etc/brltty/Input/fs/focus_small.ktb
2016-10-06 at 13:25:29.130 [brltty] file opened: /etc/brltty/Input/fs/focus_basic.kti fd=26
2016-10-06 at 13:25:29.130 [brltty] including data file: /etc/brltty/Input/fs/focus_basic.kti
2016-10-06 at 13:25:29.130 [brltty] file opened: /etc/brltty/Input/fs/common.kti fd=27
2016-10-06 at 13:25:29.130 [brltty] including data file: /etc/brltty/Input/fs/common.kti
2016-10-06 at 13:25:29.130 [brltty] file opened: /etc/brltty/Input/fs/../chords.kti fd=27
2016-10-06 at 13:25:29.130 [brltty] including data file: /etc/brltty/Input/fs/../chords.kti
2016-10-06 at 13:25:29.130 [brltty] file opened: /etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06 at 13:25:29.130 [brltty] including data file: /etc/brltty/Input/fs/../toggle.kti
2016-10-06 at 13:25:29.130 [brltty] file opened: /etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06 at 13:25:29.130 [brltty] including data file: /etc/brltty/Input/fs/../toggle.kti
2016-10-06 at 13:25:29.130 [brltty] file opened: /etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06 at 13:25:29.130 [brltty] including data file: /etc/brltty/Input/fs/../toggle.kti
2016-10-06 at 13:25:29.130 [brltty] file opened: /etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06 at 13:25:29.130 [brltty] including data file: /etc/brltty/Input/fs/../toggle.kti
2016-10-06 at 13:25:29.130 [brltty] file opened: /etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06 at 13:25:29.130 [brltty] including data file: /etc/brltty/Input/fs/../toggle.kti
2016-10-06 at 13:25:29.130 [brltty] file opened: /etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06 at 13:25:29.130 [brltty] including data file: /etc/brltty/Input/fs/../toggle.kti
2016-10-06 at 13:25:29.130 [brltty] file opened: /etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06 at 13:25:29.131 [brltty] including data file: /etc/brltty/Input/fs/../toggle.kti
2016-10-06 at 13:25:29.131 [brltty] file opened: /etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06 at 13:25:29.131 [brltty] including data file: /etc/brltty/Input/fs/../toggle.kti
2016-10-06 at 13:25:29.131 [brltty] file opened: /etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06 at 13:25:29.131 [brltty] including data file: /etc/brltty/Input/fs/../toggle.kti
2016-10-06 at 13:25:29.131 [brltty] file opened: /etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06 at 13:25:29.131 [brltty] including data file: /etc/brltty/Input/fs/../toggle.kti
2016-10-06 at 13:25:29.131 [brltty] file opened: /etc/brltty/Input/fs/../menu.kti fd=28
2016-10-06 at 13:25:29.131 [brltty] including data file: /etc/brltty/Input/fs/../menu.kti
2016-10-06 at 13:25:29.131 [brltty] program exit event added: sorted-keyboard-functions
2016-10-06 at 13:25:29.131 [brltty] file opened: /etc/brltty/Input/fs/rockers.kti fd=26
2016-10-06 at 13:25:29.131 [brltty] including data file: /etc/brltty/Input/fs/rockers.kti
2016-10-06 at 13:25:29.134 [brltty] 按鍵表: /etc/brltty/Input/fs/focus_small.ktb
2016-10-06 at 13:25:29.134 [brltty] constructing special screen: help
2016-10-06 at 13:25:29.135 [brltty] report listener registered: 0: brlapi_handleReports
2016-10-06 at 13:25:29.135 [brltty] 點字驅動: fs [FreedomScientific]
2016-10-06 at 13:25:29.135 [brltty] FreedomScientific Braille Driver:
2016-10-06 at 13:25:29.135 [brltty] 點字設備: usb:
2016-10-06 at 13:25:29.135 [brltty] 舊的偏好設定檔: /etc/brltty-fs.prefs
2016-10-06 at 13:25:29.135 [brltty] regions: text=0.40 status=0.0
2016-10-06 at 13:25:29.135 [brltty] shifts: full=40 half=20 vertical=5
2016-10-06 at 13:25:29.135 [brltty] setting braille firmness: 2
2016-10-06 at 13:25:29.135 [brltty] program exit event added: alert-tunes
2016-10-06 at 13:25:29.142 [brltty] activity state change: braille-driver: 3[started]
2016-10-06 at 13:25:29.142 [brltty] report listener unregistered: 0: brlapi_handleReports
2016-10-06 at 13:25:29.142 [brltty] pushed command environment: message
2016-10-06 at 13:25:29.142 [brltty] pushed command handler: message
2016-10-06 at 13:25:29.145 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:25:29.145 [tune-thread] PCM not available
2016-10-06 at 13:25:33.143 [brltty] popped command handler: message
2016-10-06 at 13:25:33.143 [brltty] popped command environment: message
2016-10-06 at 13:25:33.143 [brltty] report listener registered: 0: brlapi_handleReports
2016-10-06 at 13:25:35.034 [brltty] program exit event added: command-queue
2016-10-06 at 13:25:35.034 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:25:35.184 [brltty] command: 000001 (LNUP: 跳上一行) -> 000005 (PRDIFLN: 往上跳到最近的不同行)
2016-10-06 at 13:25:38.794 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:25:38.945 [brltty] command: 000001 (LNUP: 跳上一行) -> 000005 (PRDIFLN: 往上跳到最近的不同行)
2016-10-06 at 13:25:41.880 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:25:42.031 [brltty] command: 000001 (LNUP: 跳上一行) -> 000005 (PRDIFLN: 往上跳到最近的不同行)
2016-10-06 at 13:25:44.500 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:25:44.701 [brltty] command: 000002 (LNDN: 下宜一行) -> 000006 (NXDIFLN: 下移到最近的不同內容行)
2016-10-06 at 13:25:45.082 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:25:45.181 [brltty] command: 000002 (LNDN: 下宜一行) -> 000006 (NXDIFLN: 下移到最近的不同內容行)
2016-10-06 at 13:25:46.296 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:25:46.396 [brltty] command: 000002 (LNDN: 下宜一行) -> 000006 (NXDIFLN: 下移到最近的不同內容行)
2016-10-06 at 13:26:00.095 [server-main] BrlAPI connection fd=25 accepted: local <unnamed>
2016-10-06 at 13:26:00.095 [server-main] adding range [0(0)..ffffffff(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [2000004c(0)..2000004c(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20000000(0)..20000000(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [2000004a(0)..2000004a(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20000073(0)..20000073(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20000072(0)..20000072(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [2000004b(0)..2000004b(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20000075(0)..20000075(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20000074(0)..20000074(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20000077(0)..20000077(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20000076(0)..20000076(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20060000(0)..2006ffff(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20000046(0)..20000046(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20000047(0)..20000047(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [201e0000(0)..201effff(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20000078(0)..20000078(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20000079(0)..20000079(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20240000(0)..2024ffff(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20230000(0)..2023ffff(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20250000(0)..2025ffff(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20260000(0)..2026ffff(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [201f0000(0)..201fffff(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] removing range [20220000(0)..2022ffff(ffffffff)]
2016-10-06 at 13:26:00.095 [server-main] program exit event added: wchar-charset
2016-10-06 at 13:26:46.140 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:26:46.140 [tune-thread] PCM not available
2016-10-06 at 13:26:46.388 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:26:46.388 [tune-thread] PCM not available
2016-10-06 at 13:26:46.424 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:26:46.424 [tune-thread] PCM not available
2016-10-06 at 13:26:46.572 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:26:46.572 [tune-thread] PCM not available
2016-10-06 at 13:26:50.446 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:26:50.646 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A (FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06 at 13:26:53.310 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:26:53.460 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A (FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06 at 13:26:53.462 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:26:53.462 [tune-thread] PCM not available
2016-10-06 at 13:26:57.455 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:26:57.606 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A (FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06 at 13:27:01.897 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:27:02.048 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A (FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06 at 13:27:02.718 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:27:02.868 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A (FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06 at 13:27:02.869 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:27:02.869 [tune-thread] PCM not available
2016-10-06 at 13:27:08.180 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:27:08.181 [tune-thread] PCM not available
2016-10-06 at 13:27:18.843 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:27:18.953 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A (FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06 at 13:27:18.954 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:27:18.954 [tune-thread] PCM not available
2016-10-06 at 13:27:23.439 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:27:23.589 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A (FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06 at 13:27:26.191 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:27:26.342 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A (FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06 at 13:27:26.343 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:27:26.343 [tune-thread] PCM not available
2016-10-06 at 13:27:30.470 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:27:30.571 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A (FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06 at 13:27:31.453 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:27:31.564 [brltty] command: 00001D (HOME: 跳到游標)
2016-10-06 at 13:27:56.774 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:27:56.884 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A (FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06 at 13:27:56.885 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:27:56.885 [tune-thread] PCM not available
2016-10-06 at 13:27:56.886 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:27:56.886 [tune-thread] PCM not available
2016-10-06 at 13:28:01.459 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:28:01.570 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A (FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06 at 13:28:22.203 [server-main] removing range [0(0)..ffffffff(ffffffff)]
2016-10-06 at 13:28:22.203 [server-main] adding range [20010000(0)..2001ffff(ffffffff)]
2016-10-06 at 13:28:22.203 [server-main] adding range [20000020(0)..20000020(ffffffff)]
2016-10-06 at 13:28:22.203 [server-main] adding range [20000001(0)..20000001(ffffffff)]
2016-10-06 at 13:28:22.203 [server-main] adding range [20000002(0)..20000002(ffffffff)]
2016-10-06 at 13:28:22.203 [server-main] adding range [20010000(0)..2001ffff(ffffffff)]
2016-10-06 at 13:28:22.203 [server-main] adding range [2000000b(0)..2000000b(ffffffff)]
2016-10-06 at 13:28:22.203 [server-main] adding range [2000000c(0)..2000000c(ffffffff)]
2016-10-06 at 13:28:22.203 [server-main] adding range [20000022(0)..20000022(ffffffff)]
2016-10-06 at 13:28:22.203 [server-main] adding range [20000017(0)..20000017(ffffffff)]
2016-10-06 at 13:28:22.203 [server-main] adding range [20000018(0)..20000018(ffffffff)]
2016-10-06 at 13:28:22.203 [server-main] adding range [20050000(0)..2005ffff(ffffffff)]
2016-10-06 at 13:28:22.203 [server-main] adding range [2000001d(0)..2000001d(ffffffff)]
2016-10-06 at 13:28:22.203 [server-main] adding range [20020000(0)..2002ffff(ffffffff)]
2016-10-06 at 13:28:30.322 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:28:30.472 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A (FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06 at 13:28:30.473 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:28:30.473 [tune-thread] PCM not available
2016-10-06 at 13:28:38.186 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:28:38.337 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A (FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06 at 13:28:48.930 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:28:49.090 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A (FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06 at 13:28:49.091 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:28:49.092 [tune-thread] PCM not available
2016-10-06 at 13:29:16.329 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:29:16.329 [tune-thread] PCM not available
2016-10-06 at 13:29:20.425 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:29:20.425 [tune-thread] PCM not available
2016-10-06 at 13:29:44.976 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:29:44.976 [tune-thread] PCM not available
2016-10-06 at 13:29:47.761 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:29:47.761 [tune-thread] PCM not available
2016-10-06 at 13:30:23.922 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:30:24.022 [brltty] command: 000001 (LNUP: 跳上一行) -> 000005 (PRDIFLN: 往上跳到最近的不同行)
2016-10-06 at 13:30:30.983 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:30:31.133 [brltty] command: 000002 (LNDN: 下宜一行) -> 000006 (NXDIFLN: 下移到最近的不同內容行)
2016-10-06 at 13:30:31.582 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:30:31.732 [brltty] command: 000002 (LNDN: 下宜一行) -> 000006 (NXDIFLN: 下移到最近的不同內容行)
2016-10-06 at 13:30:34.132 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:30:34.232 [brltty] command: 000002 (LNDN: 下宜一行) -> 000006 (NXDIFLN: 下移到最近的不同內容行)
2016-10-06 at 13:30:34.951 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:30:35.052 [brltty] command: 000002 (LNDN: 下宜一行) -> 000006 (NXDIFLN: 下移到最近的不同內容行)
2016-10-06 at 13:30:35.053 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06 at 13:30:35.053 [tune-thread] PCM not available
2016-10-06 at 13:30:35.719 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06 at 13:30:35.829 [brltty] command: 00001D (HOME: 跳到游標)