[BRLTTY] brltty in windows

[saeid javani]

>
> I believe you
> said you built for libusb-1.0. If so, libusb-win32 wouldn't be the correct
> driver as that's for libusb (not 1.0)


Yes, that was the problem, I have installed libusb-1.0 as driver, and now
brltty connects to the device and detects it's model and cell count, etc.
but just after starting the braille driver and showing a short message on
braille display, braille display shows nothing.

Here is last lines of *run-debug.exe *(and I don't know why braille driver
is suspending?) :


*016-03-07 at 12:29:55.596 Pactos driver : verifyPacket -> begin*

*2016-03-07 at 12:29:55.596 input packet: 00 00 FF 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10
20 82*
*2016-03-07 at 12:29:55.611 Pactos driver : isIdentityResponse -> begin*

*2016-03-07 at 12:29:55.611 Pactos driver : getModelEntry -> begin*

*2016-03-07 at 12:29:55.611 Pactos driver : getModelEntry -> returned
successfully(line 120)*

*2016-03-07 at 12:29:55.611 Pactos driver : setModel -> begin*

*2016-03-07 at 12:29:55.611 Pactos Model: 0X20, 20 cells*
*2016-03-07 at 12:29:55.611 Pactos driver : setModel -> returned
successfully(line 146)*

*2016-03-07 at 12:29:55.611 Pactos driver : brl_construct -> returned
successfully(line 357)*

*2016-03-07 at 12:29:55.611 Braille Display Dimensions: 1 row, 20 columns*
*2016-03-07 at 12:29:55.611 regions: text=0.20 status=0.0*
*2016-03-07 at 12:29:55.611 shifts: full=20 half=10 vertical=5*
*2016-03-07 at 12:29:55.611 Key Bindings: BJ_3*
*2016-03-07 at 12:29:55.611 program exit event added: sorted-command-table*
*2016-03-07 at 12:29:55.611 file opened: C:/Program Files
(x86)/BRLTTY/bin/../etc/brltty/Input/pa/BJ_3.ktb fd=4*
*2016-03-07 at 12:29:55.611 including data file: C:/Program Files
(x86)/BRLTTY/bin/../etc/brltty/Input/pa/BJ_3.ktb*
*2016-03-07 at 12:29:55.611 program exit event added:
sorted-keyboard-functions*
*2016-03-07 at 12:29:55.611 Key Table: C:/Program Files
(x86)/BRLTTY/bin/../etc/brltty/Input/pa/BJ_3.ktb*
*2016-03-07 at 12:29:55.611 constructing special screen: help*
*2016-03-07 at 12:29:55.611 report listener registered: 0: 00466c40*
*2016-03-07 at 12:29:55.611 Braille Driver: pa [Pactos]*
*2016-03-07 at 12:29:55.611 Pactos Braille Driver:*
*2016-03-07 at 12:29:55.611 Braille Device: USB:*
*2016-03-07 at 12:29:55.611 Old Preferences File: ../etc/brltty-pa.prefs*
*2016-03-07 at 12:29:55.611 cannot open file: ../etc/brltty-pa.prefs: No such
file or directory*
*2016-03-07 at 12:29:55.611 regions: text=0.20 status=0.0*
*2016-03-07 at 12:29:55.611 shifts: full=20 half=10 vertical=5*
*2016-03-07 at 12:29:55.611 beeper enabled*
*2016-03-07 at 12:29:55.611 tone: MSecs:60 Freq:329*
*2016-03-07 at 12:29:55.611 activity state change: braille-driver: 3[started]*
*2016-03-07 at 12:29:55.611 suspending braille driver*
*2016-03-07 at 12:29:55.611 Pactos driver : brl_writeWindow -> begin*

*2016-03-07 at 12:29:55.611 Pactos driver : writePacket -> begin*

*2016-03-07 at 12:29:55.611 Pactos driver : writeBytes -> begin*

*2016-03-07 at 12:29:55.611 output packet: sent: 1D 15 00 01 1E 1E 01 09 13 01
03 07 11 00 09 15 1D 0E 15 07*
*2016-03-07 at 12:29:55.627 Pactos driver : brl_writeWindow -> returned
successfully(line 420)*

*2016-03-07 at 12:29:55.627 braille driver suspended*
*2016-03-07 at 12:29:55.674 tone: MSecs:100 Freq:440*
*2016-03-07 at 12:29:55.689 Pactos driver : brl_writeWindow -> begin*

*2016-03-07 at 12:29:55.689 Pactos driver : brl_writeWindow -> returned
successfully(line 420)*

*2016-03-07 at 12:29:55.705 Pactos driver : brl_destruct -> begin*

*2016-03-07 at 12:29:55.705 Pactos driver : writeBytes -> begin*

*2016-03-07 at 12:29:55.705 output packet: sent: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 26 00 00 00 00
00 00 00 00*
*2016-03-07 at 12:29:55.712 Pactos driver : brl_destruct -> returned
successfully(line 394)*

*2016-03-07 at 12:29:57.678 beeper disabled*
*2016-03-07 at 12:32:35.004 resuming braille driver*

*2016-03-07 at 12:32:35.004 Pactos driver : brl_construct -> begin*

*2016-03-07 at 12:32:35.004 Pactos driver : connectResource -> begin*


On Mon, Mar 7, 2016 at 6:45 PM, Dave Mielke <dave at mielke.cc> wrote:

> [quoted lines by saeid javani on 2016/03/07 at 16:49 +0330]
>
> >I have tested those suggestions, but the problem was that my device is HID
> >and windows assigns hidusb driver to it. Now using Zadig
> ><http://zadig.akeo.ie/>, i have replaced that driver by libusb-win32
> >driver.
>
> I'm not a Windows user, so I may not be of much help. However, I believe
> you
> said you built for libusb-1.0. If so, libusb-win32 wouldn't be the correct
> driver as that's for libusb (not 1.0). Also, if your system is 64-bit then
> libusb-win32 won't work as it's only for a 32-bit system. A 64-bit system
> definitely needs libusb-1.0.
>
> --
> Dave Mielke           | 2213 Fox Crescent | The Bible is the very Word of
> God.
> Phone: 1-613-726-0014 | Ottawa, Ontario   | http://Mielke.cc/bible/
> EMail: Dave at Mielke.cc | Canada  K2A 1H7   | http://FamilyRadio.org/
> _______________________________________________
> This message was sent via the BRLTTY mailing list.
> To post a message, send an e-mail to: BRLTTY at mielke.cc
> For general information, go to: http://mielke.cc/mailman/listinfo/brltty
>



-- 
Best Regards
Saeid Javani
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mielke.cc/pipermail/brltty/attachments/20160308/0ceafca2/attachment.html>