[BRLTTY] Brltty install and Authentication error when calling brailapitest program

[Siju Samuel]

It Looks like I did not run the command  "brltty -d /dev/pts/3 -bauto"
 after "make install". Right now the authentication is going through.
But If I run '"brttly" again, it adds one more brttly job  when checked
with ps -A | grep brttly'.    From the documentation I understood, inorder
to invoke  brtlyapi_methods there will be having  server program running.
Can you please mention which  Job it is  ? And  with multiple 'brttly'
command will it run that many server attached to many socket.?


On Fri, Jun 21, 2013 at 10:40 AM, Siju Samuel <sijusamueltech at gmail.com>wrote:

> Hi,
>
> I am getting "Authentication failed Message" when running BrailApi.
>  Installed Brttly and ran apitest. Details are as below.
>
>
> *Details : *
> I have installed brttly freshly in a linux ubuntu box. Uninstalled the
> default brltty comes with this and installed from the downloaded
>  brltty-4.5.tar.gz
> by doing the following from the extracted directory.
> sudo ./configure
> sudo make
> sudo make install
>
>
> Then when running the "apitest" from
>
> cd brltty-4.5/Programs
> sudo make apitest
> sudo  ./apitest
> *Connecting to BrlAPI... failed to connect to :0 using auth
> /etc/brlapi.key: Authentication failed*
>
> Also I have changed the main in Apitest.c, still gives the same error.
> *change : settings.host = NULL; settings.auth ="/etc/brlapi.key";*
>
> I have also  referred the sample program here, still gets the same error.
> http://mielke.cc/brltty/doc/Manual-BrlAPI/English/BrlAPI-5.html#sec-library
>
>
> So am I missing any steps required. Any help is highly appreciated. Please
> note that  I am running all the program with  root/sudo  access.
>
> Thanks,
> Siju Samuel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mielke.cc/pipermail/brltty/attachments/20130621/ad412be8/attachment.html>