[BRLTTY] brltty and Esytime, on Raspbian Jessie.

Tue Jul 5 13:12:07 EDT 2016

OK, the output log file is attached.

I hit:
- Commands
1. LeftJoystickLeft
2. LeftJoystickRight
3. LeftJoystickUp
4. LeftJoystickDown
5. RightJoystickPress
6. l1 (a key just below the left joystick that should browse the current 
line backward e.g. if the line is too bigger to be displayed on the device.)
7. l5 (a key just below the rightjoystick that does similar than l1, but 
forward.)

- Characters
1. # (braille = 34568)
2. { (braille = 2378)
3. } (braille = 7568)
4. [ (braille = 23768)
5. ] (braille = 37568)

I use the fr-2007 text-table. The characters I typed (e.g. # { } [ ]) 
are all defined in it. They can be printed, but when I type them myself, 
nothing append.

Thank you,

Arthur BREUNEVAL
Sent with Mozilla Thunderbird.

Le 04/07/2016 à 04:36, Dave Mielke a écrit :
> [quoted lines by Arthur BREUNEVAL on 2016/07/03 at 20:39 +0200]
>
>> Actually I browsed the wrong doc (on mielke.cc/brltty/...), but there
>> is not any difference between the both brltty.com and mielke.cc on
>> the keyboard table of Esytime.
> brltty.com is the one users should be using. mielke.cc is my personal servder,
> and where brltty used to be hosted. I still stage brltty.com updates to it,
> though.
>
>> So, the key to browse the screen works in mot cases, but not in the
>> console of the terminal: it gives the previous command typed, like
>> arrow-up.
> If you think there may be errors in how the keys are being interpreted by the
> driver then please send me a debug log. In this case, set the log level to:
>
>     debug,inpkts,brlkeys
>
> The best thing to do would be to press each of the keys in a specific order,
> and then, as well as sending the log file, say in which order the keys were
> pressed.
>
>> On Esytime, the LeftJoystickDown command does Alt, and
>> RightJoystickPress does Enter.
>> I think it is because Eurobraille has preconfigured the commands, but
>> it is surprising that some are not overriden by BRLTTY even they are
>> assigned...
> Send a debug log and we'll figure it out.
>
>> Last, I can't type some characters: {, }, #, maybe other but I didn't
>> found these at this time... When I type them, nothing append.
>> Strange. ^^
> Perhaps, for whatever reason, they aren't defined within the text table that
> you're using.
>

-------------- next part --------------
2016-07-05 at 18:25:46.662 [brltty] BRLTTY 5.4 rev BRLTTY-5.4-16-gb1cb726b [http://brltty.com/]
2016-07-05 at 18:25:46.663 [brltty] lock descriptor allocated: queue-discarded-elements
2016-07-05 at 18:25:46.663 [brltty] Log Level: debug,inpkts,brlkeys
2016-07-05 at 18:25:46.664 [brltty] pushed command environment: initial
2016-07-05 at 18:25:46.664 [brltty] report listener registered: 0: handleUpdateBrailleOnline
2016-07-05 at 18:25:46.699 [brltty] program exit event added: screen-data
2016-07-05 at 18:25:46.699 [brltty] Working Directory: /
2016-07-05 at 18:25:46.699 [brltty] Configuration File: /etc/brltty.conf
2016-07-05 at 18:25:46.699 [brltty] Updatable Directory: /var/lib/brltty
2016-07-05 at 18:25:46.699 [brltty] Preferences File: brltty.prefs
2016-07-05 at 18:25:46.699 [brltty] Writable Directory: /var/run/brltty
2016-07-05 at 18:25:46.699 [brltty] Drivers Directory: /lib/brltty
2016-07-05 at 18:25:46.699 [brltty] Tables Directory: /etc/brltty
2016-07-05 at 18:25:46.728 [brltty] program exit event added: tunes
2016-07-05 at 18:25:46.728 [brltty] tune thread state change: 0 -> 1
2016-07-05 at 18:25:46.728 [brltty] tune thread state change: 1 -> 3
2016-07-05 at 18:25:46.728 [brltty] regions: text=0.0 status=0.0
2016-07-05 at 18:25:46.728 [brltty] shifts: full=1 half=0 vertical=5
2016-07-05 at 18:25:46.728 [brltty] compiling text table: /etc/brltty/Text/fr-2007.ttb
2016-07-05 at 18:25:46.772 [brltty] file opened: /etc/brltty/Text/fr-2007.ttb fd=8
2016-07-05 at 18:25:46.772 [brltty] including data file: /etc/brltty/Text/fr-2007.ttb
2016-07-05 at 18:25:46.777 [brltty] file opened: /etc/brltty/Text/ltr-latin.tti fd=9
2016-07-05 at 18:25:46.777 [brltty] including data file: /etc/brltty/Text/ltr-latin.tti
2016-07-05 at 18:25:46.779 [brltty] file opened: /etc/brltty/Text/ltr-alias.tti fd=10
2016-07-05 at 18:25:46.780 [brltty] including data file: /etc/brltty/Text/ltr-alias.tti
2016-07-05 at 18:25:46.807 [brltty] file opened: /etc/brltty/Text/num-french.tti fd=9
2016-07-05 at 18:25:46.807 [brltty] including data file: /etc/brltty/Text/num-french.tti
2016-07-05 at 18:25:46.812 [brltty] file opened: /etc/brltty/Text/num-alias.tti fd=10
2016-07-05 at 18:25:46.813 [brltty] including data file: /etc/brltty/Text/num-alias.tti
2016-07-05 at 18:25:46.818 [brltty] file opened: /etc/brltty/Text/common.tti fd=9
2016-07-05 at 18:25:46.818 [brltty] including data file: /etc/brltty/Text/common.tti
2016-07-05 at 18:25:46.833 [brltty] file opened: /etc/brltty/Text/spaces.tti fd=10
2016-07-05 at 18:25:46.833 [brltty] including data file: /etc/brltty/Text/spaces.tti
2016-07-05 at 18:25:46.845 [brltty] file opened: /etc/brltty/Text/boxes.tti fd=10
2016-07-05 at 18:25:46.845 [brltty] including data file: /etc/brltty/Text/boxes.tti
2016-07-05 at 18:25:46.872 [brltty] file opened: /etc/brltty/Text/blocks.tti fd=10
2016-07-05 at 18:25:46.872 [brltty] including data file: /etc/brltty/Text/blocks.tti
2016-07-05 at 18:25:46.882 [brltty] Text Table: fr-2007
2016-07-05 at 18:25:46.882 [brltty] program exit event added: text-table
2016-07-05 at 18:25:46.882 [brltty] Attributes Table: left_right
2016-07-05 at 18:25:46.882 [brltty] program exit event added: attributes-table
2016-07-05 at 18:25:46.882 [brltty] Keyboard Property: type=usb
2016-07-05 at 18:25:46.882 [brltty] Keyboard Property: vendor=
2016-07-05 at 18:25:46.882 [brltty] Keyboard Property: product=
2016-07-05 at 18:25:46.882 [brltty] program exit event added: keyboard-table
2016-07-05 at 18:25:46.882 [brltty] compiling keyboard table: /etc/brltty/Keyboard/braille.ktb
2016-07-05 at 18:25:46.883 [brltty] program exit event added: sorted-command-table
2016-07-05 at 18:25:46.887 [brltty] file opened: /etc/brltty/Keyboard/braille.ktb fd=8
2016-07-05 at 18:25:46.887 [brltty] including data file: /etc/brltty/Keyboard/braille.ktb
2016-07-05 at 18:25:46.896 [brltty] program exit event added: sorted-keyboard-functions
2016-07-05 at 18:25:46.910 [brltty] file opened: /etc/brltty/Keyboard/../Input/chords.kti fd=9
2016-07-05 at 18:25:46.910 [brltty] including data file: /etc/brltty/Keyboard/../Input/chords.kti
2016-07-05 at 18:25:46.917 [brltty] file opened: /etc/brltty/Keyboard/../Input/toggle.kti fd=10
2016-07-05 at 18:25:46.917 [brltty] including data file: /etc/brltty/Keyboard/../Input/toggle.kti
2016-07-05 at 18:25:46.919 [brltty] file opened: /etc/brltty/Keyboard/../Input/toggle.kti fd=10
2016-07-05 at 18:25:46.919 [brltty] including data file: /etc/brltty/Keyboard/../Input/toggle.kti
2016-07-05 at 18:25:46.919 [brltty] file opened: /etc/brltty/Keyboard/../Input/toggle.kti fd=10
2016-07-05 at 18:25:46.919 [brltty] including data file: /etc/brltty/Keyboard/../Input/toggle.kti
2016-07-05 at 18:25:46.920 [brltty] file opened: /etc/brltty/Keyboard/../Input/toggle.kti fd=10
2016-07-05 at 18:25:46.920 [brltty] including data file: /etc/brltty/Keyboard/../Input/toggle.kti
2016-07-05 at 18:25:46.920 [brltty] file opened: /etc/brltty/Keyboard/../Input/toggle.kti fd=10
2016-07-05 at 18:25:46.920 [brltty] including data file: /etc/brltty/Keyboard/../Input/toggle.kti
2016-07-05 at 18:25:46.920 [brltty] file opened: /etc/brltty/Keyboard/../Input/toggle.kti fd=10
2016-07-05 at 18:25:46.920 [brltty] including data file: /etc/brltty/Keyboard/../Input/toggle.kti
2016-07-05 at 18:25:46.920 [brltty] file opened: /etc/brltty/Keyboard/../Input/toggle.kti fd=10
2016-07-05 at 18:25:46.920 [brltty] including data file: /etc/brltty/Keyboard/../Input/toggle.kti
2016-07-05 at 18:25:46.921 [brltty] file opened: /etc/brltty/Keyboard/../Input/toggle.kti fd=10
2016-07-05 at 18:25:46.921 [brltty] including data file: /etc/brltty/Keyboard/../Input/toggle.kti
2016-07-05 at 18:25:46.921 [brltty] file opened: /etc/brltty/Keyboard/../Input/toggle.kti fd=10
2016-07-05 at 18:25:46.921 [brltty] including data file: /etc/brltty/Keyboard/../Input/toggle.kti
2016-07-05 at 18:25:46.921 [brltty] file opened: /etc/brltty/Keyboard/../Input/toggle.kti fd=10
2016-07-05 at 18:25:46.921 [brltty] including data file: /etc/brltty/Keyboard/../Input/toggle.kti
2016-07-05 at 18:25:46.922 [brltty] file opened: /etc/brltty/Keyboard/../Input/menu.kti fd=10
2016-07-05 at 18:25:46.922 [brltty] including data file: /etc/brltty/Keyboard/../Input/menu.kti
2016-07-05 at 18:25:46.932 [brltty] program exit event added: keyboard-monitor
2016-07-05 at 18:25:46.932 [brltty] activity action request: keyboard-monitor: start
2016-07-05 at 18:25:46.932 [brltty] activity state change: keyboard-monitor: 4[preparing]
2016-07-05 at 18:25:46.932 [brltty] activity state change: keyboard-monitor: 1[prepared]
2016-07-05 at 18:25:46.932 [brltty] activity state change: keyboard-monitor: 2[scheduled]
2016-07-05 at 18:25:46.932 [brltty] constructing special screen: help
2016-07-05 at 18:25:46.933 [brltty] Keyboard Table: braille
2016-07-05 at 18:25:46.933 [brltty] program exit event added: screen-driver
2016-07-05 at 18:25:46.933 [brltty] activity action request: screen-driver: start
2016-07-05 at 18:25:46.933 [brltty] activity state change: screen-driver: 4[preparing]
2016-07-05 at 18:25:46.933 [brltty] activity state change: screen-driver: 1[prepared]
2016-07-05 at 18:25:46.933 [brltty] activity state change: screen-driver: 2[scheduled]
2016-07-05 at 18:25:46.933 [brltty] BrlAPI Server: release 0.6.5
2016-07-05 at 18:25:46.933 [brltty] API Parameter: auth=
2016-07-05 at 18:25:46.933 [brltty] API Parameter: host=
2016-07-05 at 18:25:46.933 [brltty] API Parameter: stacksize=
2016-07-05 at 18:25:46.933 [brltty] program exit event added: address-table
2016-07-05 at 18:25:46.933 [brltty] program exit event added: api-server
2016-07-05 at 18:25:46.933 [brltty] program exit event added: braille-data
2016-07-05 at 18:25:46.933 [brltty] program exit event added: braille-driver
2016-07-05 at 18:25:46.933 [brltty] activity action request: braille-driver: start
2016-07-05 at 18:25:46.933 [brltty] activity state change: braille-driver: 4[preparing]
2016-07-05 at 18:25:46.933 [brltty] Braille Display Dimensions: 1 row, 1 column
2016-07-05 at 18:25:46.933 [brltty] regions: text=0.1 status=0.0
2016-07-05 at 18:25:46.933 [brltty] shifts: full=1 half=0 vertical=5
2016-07-05 at 18:25:46.933 [brltty] activity state change: braille-driver: 1[prepared]
2016-07-05 at 18:25:46.933 [brltty] activity state change: braille-driver: 2[scheduled]
2016-07-05 at 18:25:46.933 [brltty] program exit event added: speech-data
2016-07-05 at 18:25:46.933 [brltty] program exit event added: speech-driver
2016-07-05 at 18:25:46.933 [brltty] activity action request: speech-driver: start
2016-07-05 at 18:25:46.933 [brltty] activity state change: speech-driver: 4[preparing]
2016-07-05 at 18:25:46.933 [brltty] activity state change: speech-driver: 1[prepared]
2016-07-05 at 18:25:46.934 [brltty] activity state change: speech-driver: 2[scheduled]
2016-07-05 at 18:25:46.934 [brltty] Speech Input: none
2016-07-05 at 18:25:46.934 [brltty] program exit event added: sessions
2016-07-05 at 18:25:46.934 [brltty] pushed command environment: main
2016-07-05 at 18:25:46.934 [brltty] pushed command handler: unhandled
2016-07-05 at 18:25:46.934 [brltty] pushed command handler: miscellaneous
2016-07-05 at 18:25:46.934 [brltty] pushed command handler: learn
2016-07-05 at 18:25:46.934 [brltty] pushed command handler: speech
2016-07-05 at 18:25:46.934 [brltty] pushed command handler: clipboard
2016-07-05 at 18:25:46.934 [brltty] pushed command handler: preferences
2016-07-05 at 18:25:46.934 [brltty] pushed command handler: toggle
2016-07-05 at 18:25:46.934 [brltty] report listener registered: 3: brailleWindowUpdatedListener
2016-07-05 at 18:25:46.934 [brltty] pushed command handler: touch
2016-07-05 at 18:25:46.934 [brltty] report listener registered: 0: keycodeCommandDataResetListener
2016-07-05 at 18:25:46.934 [brltty] pushed command handler: keycodes
2016-07-05 at 18:25:46.934 [brltty] report listener registered: 0: inputCommandDataResetListener
2016-07-05 at 18:25:46.934 [brltty] pushed command handler: input
2016-07-05 at 18:25:46.934 [brltty] pushed command handler: navigation
2016-07-05 at 18:25:46.934 [brltty] pushed command handler: screen
2016-07-05 at 18:25:46.934 [brltty] pushed command handler: custom
2016-07-05 at 18:25:46.934 [brltty] pushed command handler: API
2016-07-05 at 18:25:46.934 [brltty] activity state change: keyboard-monitor: 6[starting]
2016-07-05 at 18:25:46.934 [brltty] searching for keyboards
2016-07-05 at 18:25:46.934 [brltty] checking input device: event1: bus=0006 vnd=0000 prd=0000 ver=0000 tpl=speakup/input0 nam=Speakup
2016-07-05 at 18:25:46.977 [brltty] checking input device: event0: bus=0003 vnd=C251 prd=1130 ver=0101 tpl=usb-3f980000.usb-1.3/input1 id=0001A0000000 nam=Eurobraille sas Esytime HID 
2016-07-05 at 18:25:46.978 [brltty] starting host command: /sbin/modprobe -q uinput
2016-07-05 at 18:25:46.986 [brltty] host command exit status: 0: /sbin/modprobe
2016-07-05 at 18:25:46.986 [brltty] activity state change: screen-driver: 6[starting]
2016-07-05 at 18:25:46.986 [brltty] checking for screen driver: lx
2016-07-05 at 18:25:46.997 [brltty] initializing screen driver: lx
2016-07-05 at 18:25:46.997 [brltty] device directory: /dev
2016-07-05 at 18:25:46.997 [brltty] checking screen device: /dev/vcsa
2016-07-05 at 18:25:46.997 [brltty] screen device: vcsa
2016-07-05 at 18:25:46.997 [brltty] checking console device: /dev/tty0
2016-07-05 at 18:25:46.997 [brltty] console device: tty0
2016-07-05 at 18:25:46.997 [brltty] device opened: /dev/tty1: fd=14
2016-07-05 at 18:25:46.997 [brltty] device opened: /dev/vcsa: fd=15
2016-07-05 at 18:25:46.997 [brltty] checking uinput device: /dev/uinput
2016-07-05 at 18:25:46.997 [brltty] uinput device: uinput
2016-07-05 at 18:25:46.997 [brltty] device opened: /dev/uinput: fd=16
2016-07-05 at 18:25:46.997 [brltty] uinput opened: uinput fd=16
2016-07-05 at 18:25:46.998 [brltty] report listener registered: 1: lxBrailleOfflineListener
2016-07-05 at 18:25:46.998 [brltty] Screen Driver: lx [Linux]
2016-07-05 at 18:25:46.998 [brltty] Linux Screen Driver:
2016-07-05 at 18:25:46.998 [brltty] Screen Parameter: charset=
2016-07-05 at 18:25:46.998 [brltty] Screen Parameter: debugsfm=
2016-07-05 at 18:25:46.998 [brltty] Screen Parameter: hfb=
2016-07-05 at 18:25:46.998 [brltty] Screen Parameter: vt=
2016-07-05 at 18:25:46.998 [brltty] activity state change: screen-driver: 3[started]
2016-07-05 at 18:25:46.998 [brltty] activity state change: braille-driver: 6[starting]
2016-07-05 at 18:25:46.998 [brltty] checking braille device: usb:
2016-07-05 at 18:25:46.998 [brltty] checking for braille driver: eu
2016-07-05 at 18:25:46.998 [brltty] initializing braille driver: eu -> usb:
2016-07-05 at 18:25:46.999 [brltty] USB configuration set error 16: Device or resource busy.
2016-07-05 at 18:25:46.999 [brltty] USB configuration set error 16: Device or resource busy.
2016-07-05 at 18:25:47.000 [brltty] USB: Manufacturer Name: Eurobraille sas
2016-07-05 at 18:25:47.001 [brltty] USB: Product Description: Esytime HID 
2016-07-05 at 18:25:47.002 [brltty] USB: Serial Number: 0001A0000000
2016-07-05 at 18:25:47.002 [brltty] USB configuration set error 16: Device or resource busy.
2016-07-05 at 18:25:47.002 [brltty] USB interface in use: 0 (usbhid)
2016-07-05 at 18:25:47.003 [brltty] program exit event added: sorted-usb-serial-adapters
2016-07-05 at 18:25:47.003 [brltty] activity state change: speech-driver: 6[starting]
2016-07-05 at 18:25:47.003 [brltty] no autodetectable speech drivers
2016-07-05 at 18:25:47.003 [brltty] checking for speech driver: no
2016-07-05 at 18:25:47.003 [brltty] initializing speech driver: no
2016-07-05 at 18:25:47.004 [brltty] device opened: /dev/tty0: fd=22
2016-07-05 at 18:25:47.005 [brltty] Speech Driver: no [NoSpeech]
2016-07-05 at 18:25:47.005 [brltty] NoSpeech Speech Driver:
2016-07-05 at 18:25:47.005 [brltty] activity state change: speech-driver: 3[started]
2016-07-05 at 18:25:47.195 [brltty] input packet: 02 00 0E 53 4E 65 73 79 74 69 6D 65 33 32 00 03
2016-07-05 at 18:25:47.196 [brltty] Esysiris Long Name: esytime32
2016-07-05 at 18:25:47.355 [brltty] input packet: 02 00 09 53 48 65 73 33 32 00 03
2016-07-05 at 18:25:47.356 [brltty] Esysiris Short Name: es32
2016-07-05 at 18:25:47.515 [brltty] input packet: 02 00 09 53 53 30 32 38 37 00 03
2016-07-05 at 18:25:47.516 [brltty] Esysiris Serial Number: 0287
2016-07-05 at 18:25:47.643 [brltty] input packet: 02 00 07 53 4C 46 52 00 03
2016-07-05 at 18:25:47.644 [brltty] Esysiris Country Code: FR
2016-07-05 at 18:25:47.804 [brltty] input packet: 02 00 05 53 47 20 03
2016-07-05 at 18:25:47.804 [brltty] Esysiris Cell Count: 32
2016-07-05 at 18:25:47.964 [brltty] input packet: 02 00 05 53 54 0F 03
2016-07-05 at 18:25:47.964 [brltty] Esysiris Model Identifier: 15
2016-07-05 at 18:25:48.092 [brltty] input packet: 02 00 24 5A 31 2D 2D 2D 2D 2D 42 45 47 49 4E 20 52 53 41 20 50 52 49 56 41 54 45 20 4B 45 59 2D 2D 2D 2D 2D 0A 03
2016-07-05 at 18:25:48.092 [brltty] Unexpected Packet: 02 00 24 5A 31 2D 2D 2D 2D 2D 42 45 47 49 4E 20 52 53 41 20 50 52 49 56 41 54 45 20 4B 45 59 2D 2D 2D 2D 2D 0A 03
2016-07-05 at 18:25:48.252 [brltty] input packet: 02 00 24 53 4F FF FF FF FF FF FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03
2016-07-05 at 18:25:48.252 [brltty] Esysiris Device Options: 0XFFFFFFFF
2016-07-05 at 18:25:48.412 [brltty] input packet: 02 00 14 53 57 31 2E 30 33 20 33 31 2D 30 33 2D 32 30 31 34 00 03
2016-07-05 at 18:25:48.412 [brltty] Esysiris Firmware Version: 1.03 31-03-2014
2016-07-05 at 18:25:48.540 [brltty] input packet: 02 00 14 53 50 31 2E 30 31 20 32 35 2D 30 32 2D 32 30 31 34 00 03
2016-07-05 at 18:25:48.540 [brltty] Esysiris Protocol Version: 1.01 25-02-2014
2016-07-05 at 18:25:48.700 [brltty] input packet: 02 00 06 53 4D 02 00 03
2016-07-05 at 18:25:48.700 [brltty] Esysiris Maximum Frame Length: 512
2016-07-05 at 18:25:48.988 [brltty] input packet: 02 00 05 4B 55 31 03
2016-07-05 at 18:25:48.988 [brltty] Unexpected Packet: 02 00 05 4B 55 31 03
2016-07-05 at 18:25:49.148 [brltty] input packet: 02 00 05 52 53 30 03
2016-07-05 at 18:25:49.308 [brltty] input packet: 02 00 04 53 49 03
2016-07-05 at 18:25:49.308 [brltty] end of Esysiris system information
2016-07-05 at 18:25:49.308 [brltty] Model Detected: Esytime 32 Standard (32 cells)
2016-07-05 at 18:25:49.308 [brltty] Braille Display Dimensions: 1 row, 32 columns
2016-07-05 at 18:25:49.308 [brltty] regions: text=0.32 status=0.0
2016-07-05 at 18:25:49.308 [brltty] shifts: full=32 half=16 vertical=5
2016-07-05 at 18:25:49.308 [brltty] Key Bindings: esytime
2016-07-05 at 18:25:49.310 [brltty] file opened: /etc/brltty/Input/eu/esytime.ktb fd=25
2016-07-05 at 18:25:49.310 [brltty] including data file: /etc/brltty/Input/eu/esytime.ktb
2016-07-05 at 18:25:49.311 [brltty] file opened: /etc/brltty/Input/eu/common.kti fd=26
2016-07-05 at 18:25:49.311 [brltty] including data file: /etc/brltty/Input/eu/common.kti
2016-07-05 at 18:25:49.312 [brltty] file opened: /etc/brltty/Input/eu/braille.kti fd=27
2016-07-05 at 18:25:49.312 [brltty] including data file: /etc/brltty/Input/eu/braille.kti
2016-07-05 at 18:25:49.314 [brltty] file opened: /etc/brltty/Input/eu/joysticks.kti fd=26
2016-07-05 at 18:25:49.314 [brltty] including data file: /etc/brltty/Input/eu/joysticks.kti
2016-07-05 at 18:25:49.317 [brltty] Key Table: /etc/brltty/Input/eu/esytime.ktb
2016-07-05 at 18:25:49.318 [brltty] report listener registered: 0: brlapi_handleReports
2016-07-05 at 18:25:49.318 [brltty] Braille Driver: eu [EuroBraille]
2016-07-05 at 18:25:49.319 [brltty] EuroBraille Braille Driver: version 2.0
2016-07-05 at 18:25:49.319 [brltty] Braille Parameter: protocol=esytime
2016-07-05 at 18:25:49.319 [brltty] Braille Device: usb:
2016-07-05 at 18:25:49.319 [brltty] Old Preferences File: /etc/brltty-eu.prefs
2016-07-05 at 18:25:49.319 [brltty] cannot open file: /etc/brltty-eu.prefs: No such file or directory
2016-07-05 at 18:25:49.319 [brltty] regions: text=0.32 status=0.0
2016-07-05 at 18:25:49.319 [brltty] shifts: full=32 half=16 vertical=5
2016-07-05 at 18:25:49.319 [brltty] program exit event added: alert-tunes
2016-07-05 at 18:25:49.319 [brltty] activity state change: braille-driver: 3[started]
2016-07-05 at 18:25:49.319 [brltty] checking uinput device: /dev/uinput
2016-07-05 at 18:25:49.319 [brltty] uinput device: uinput
2016-07-05 at 18:25:49.319 [tune-thread] starting host command: /sbin/modprobe -q pcspkr
2016-07-05 at 18:25:49.319 [brltty] device opened: /dev/uinput: fd=25
2016-07-05 at 18:25:49.320 [brltty] uinput opened: uinput fd=25
2016-07-05 at 18:25:49.322 [brltty] keyboard opened: /dev/input/event0: fd=12
2016-07-05 at 18:25:49.322 [brltty] checking input device: mice:
2016-07-05 at 18:25:49.326 [tune-thread] host command exit status: 1: /sbin/modprobe
2016-07-05 at 18:25:49.326 [tune-thread] kernel module not installed: pcspkr
2016-07-05 at 18:25:49.326 [tune-thread] console opened: fd=26
2016-07-05 at 18:25:49.326 [tune-thread] program exit event added: console-stream
2016-07-05 at 18:25:49.326 [tune-thread] beeper enabled
2016-07-05 at 18:25:49.326 [tune-thread] tone: MSecs:60 Freq:329
2016-07-05 at 18:25:49.367 [brltty] keyboard search complete
2016-07-05 at 18:25:49.368 [brltty] activity state change: keyboard-monitor: 3[started]
2016-07-05 at 18:25:49.368 [brltty] report listener unregistered: 0: brlapi_handleReports
2016-07-05 at 18:25:49.368 [brltty] pushed command environment: message
2016-07-05 at 18:25:49.368 [brltty] pushed command handler: message
2016-07-05 at 18:25:49.386 [tune-thread] tone: MSecs:100 Freq:440
2016-07-05 at 18:25:50.468 [brltty] kobject uevent action: add /module/bluetooth
2016-07-05 at 18:25:50.468 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.468 [brltty] kobject uevent property: DEVPATH /module/bluetooth
2016-07-05 at 18:25:50.468 [brltty] kobject uevent property: SUBSYSTEM module
2016-07-05 at 18:25:50.468 [brltty] kobject uevent property: SEQNUM 1087
2016-07-05 at 18:25:50.469 [brltty] kobject uevent data: libudev: FE ED CA FE 28 00 00 00 28 00 00 00 5B 00 00 00 38 E3 A3 0F 00 00 00 00 00 00 00 00 00 00 00 00
2016-07-05 at 18:25:50.469 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.469 [brltty] kobject uevent property: DEVPATH /module/bluetooth
2016-07-05 at 18:25:50.469 [brltty] kobject uevent property: SEQNUM 1087
2016-07-05 at 18:25:50.469 [brltty] kobject uevent property: SUBSYSTEM module
2016-07-05 at 18:25:50.469 [brltty] kobject uevent property: USEC_INITIALIZED 4670474
2016-07-05 at 18:25:50.469 [brltty] kobject uevent action: add /class/bluetooth
2016-07-05 at 18:25:50.469 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.469 [brltty] kobject uevent property: DEVPATH /class/bluetooth
2016-07-05 at 18:25:50.469 [brltty] kobject uevent property: SUBSYSTEM class
2016-07-05 at 18:25:50.469 [brltty] kobject uevent property: SEQNUM 1088
2016-07-05 at 18:25:50.470 [brltty] kobject uevent data: libudev: FE ED CA FE 28 00 00 00 28 00 00 00 59 00 00 00 71 F5 D4 76 00 00 00 00 00 00 00 00 00 00 00 00
2016-07-05 at 18:25:50.470 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.470 [brltty] kobject uevent property: DEVPATH /class/bluetooth
2016-07-05 at 18:25:50.470 [brltty] kobject uevent property: SEQNUM 1088
2016-07-05 at 18:25:50.470 [brltty] kobject uevent property: SUBSYSTEM class
2016-07-05 at 18:25:50.470 [brltty] kobject uevent property: USEC_INITIALIZED 4671925
2016-07-05 at 18:25:50.473 [brltty] kobject uevent action: add /module/btbcm
2016-07-05 at 18:25:50.473 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.473 [brltty] kobject uevent property: DEVPATH /module/btbcm
2016-07-05 at 18:25:50.473 [brltty] kobject uevent property: SUBSYSTEM module
2016-07-05 at 18:25:50.473 [brltty] kobject uevent property: SEQNUM 1089
2016-07-05 at 18:25:50.474 [brltty] kobject uevent data: libudev: FE ED CA FE 28 00 00 00 28 00 00 00 57 00 00 00 38 E3 A3 0F 00 00 00 00 00 00 00 00 00 00 00 00
2016-07-05 at 18:25:50.474 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.474 [brltty] kobject uevent property: DEVPATH /module/btbcm
2016-07-05 at 18:25:50.474 [brltty] kobject uevent property: SEQNUM 1089
2016-07-05 at 18:25:50.474 [brltty] kobject uevent property: SUBSYSTEM module
2016-07-05 at 18:25:50.474 [brltty] kobject uevent property: USEC_INITIALIZED 4675693
2016-07-05 at 18:25:50.479 [brltty] kobject uevent action: add /module/hci_uart
2016-07-05 at 18:25:50.479 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.479 [brltty] kobject uevent property: DEVPATH /module/hci_uart
2016-07-05 at 18:25:50.479 [brltty] kobject uevent property: SUBSYSTEM module
2016-07-05 at 18:25:50.479 [brltty] kobject uevent property: SEQNUM 1090
2016-07-05 at 18:25:50.479 [brltty] kobject uevent data: libudev: FE ED CA FE 28 00 00 00 28 00 00 00 5A 00 00 00 38 E3 A3 0F 00 00 00 00 00 00 00 00 00 00 00 00
2016-07-05 at 18:25:50.479 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.480 [brltty] kobject uevent property: DEVPATH /module/hci_uart
2016-07-05 at 18:25:50.480 [brltty] kobject uevent property: SEQNUM 1090
2016-07-05 at 18:25:50.480 [brltty] kobject uevent property: SUBSYSTEM module
2016-07-05 at 18:25:50.480 [brltty] kobject uevent property: USEC_INITIALIZED 4681431
2016-07-05 at 18:25:50.480 [brltty] kobject uevent action: add /bus/platform/drivers/hci_bcm
2016-07-05 at 18:25:50.480 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.480 [brltty] kobject uevent property: DEVPATH /bus/platform/drivers/hci_bcm
2016-07-05 at 18:25:50.480 [brltty] kobject uevent property: SUBSYSTEM drivers
2016-07-05 at 18:25:50.480 [brltty] kobject uevent property: SEQNUM 1091
2016-07-05 at 18:25:50.481 [brltty] kobject uevent data: libudev: FE ED CA FE 28 00 00 00 28 00 00 00 68 00 00 00 4D 03 5E B4 00 00 00 00 00 00 00 00 00 00 00 00
2016-07-05 at 18:25:50.481 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.481 [brltty] kobject uevent property: DEVPATH /bus/platform/drivers/hci_bcm
2016-07-05 at 18:25:50.481 [brltty] kobject uevent property: SEQNUM 1091
2016-07-05 at 18:25:50.481 [brltty] kobject uevent property: SUBSYSTEM drivers
2016-07-05 at 18:25:50.481 [brltty] kobject uevent property: USEC_INITIALIZED 4682640
2016-07-05 at 18:25:50.482 [brltty] kobject uevent action: add /devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0
2016-07-05 at 18:25:50.482 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.482 [brltty] kobject uevent property: DEVPATH /devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0
2016-07-05 at 18:25:50.482 [brltty] kobject uevent property: SUBSYSTEM bluetooth
2016-07-05 at 18:25:50.482 [brltty] kobject uevent property: DEVTYPE host
2016-07-05 at 18:25:50.482 [brltty] kobject uevent property: SEQNUM 1092
2016-07-05 at 18:25:50.482 [brltty] kobject uevent action: add /devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0/rfkill1
2016-07-05 at 18:25:50.482 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.482 [brltty] kobject uevent property: DEVPATH /devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0/rfkill1
2016-07-05 at 18:25:50.483 [brltty] kobject uevent property: SUBSYSTEM rfkill
2016-07-05 at 18:25:50.483 [brltty] kobject uevent property: RFKILL_NAME hci0
2016-07-05 at 18:25:50.483 [brltty] kobject uevent property: RFKILL_TYPE bluetooth
2016-07-05 at 18:25:50.483 [brltty] kobject uevent property: RFKILL_STATE 1
2016-07-05 at 18:25:50.483 [brltty] kobject uevent property: SEQNUM 1093
2016-07-05 at 18:25:50.514 [brltty] kobject uevent data: libudev: FE ED CA FE 28 00 00 00 28 00 00 00 F0 00 00 00 B1 F0 1B BD 5E 9E A7 28 02 00 04 00 10 80 00 00
2016-07-05 at 18:25:50.514 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.514 [brltty] kobject uevent property: DEVPATH /devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0
2016-07-05 at 18:25:50.514 [brltty] kobject uevent property: DEVTYPE host
2016-07-05 at 18:25:50.514 [brltty] kobject uevent property: SEQNUM 1092
2016-07-05 at 18:25:50.514 [brltty] kobject uevent property: SUBSYSTEM bluetooth
2016-07-05 at 18:25:50.514 [brltty] kobject uevent property: SYSTEMD_ALIAS /sys/subsystem/bluetooth/devices/hci0
2016-07-05 at 18:25:50.514 [brltty] kobject uevent property: SYSTEMD_WANTS bluetooth.target
2016-07-05 at 18:25:50.514 [brltty] kobject uevent property: TAGS :systemd:
2016-07-05 at 18:25:50.515 [brltty] kobject uevent property: USEC_INITIALIZED 4685166
2016-07-05 at 18:25:50.517 [brltty] kobject uevent data: libudev: FE ED CA FE 28 00 00 00 28 00 00 00 26 01 00 00 75 75 14 C8 00 00 00 00 02 00 04 00 10 80 00 00
2016-07-05 at 18:25:50.517 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.517 [brltty] kobject uevent property: DEVPATH /devices/platform/soc/3f201000.uart/tty/ttyAMA0/hci0/rfkill1
2016-07-05 at 18:25:50.517 [brltty] kobject uevent property: ID_PATH platform-soc
2016-07-05 at 18:25:50.517 [brltty] kobject uevent property: ID_PATH_TAG platform-soc
2016-07-05 at 18:25:50.517 [brltty] kobject uevent property: RFKILL_NAME hci0
2016-07-05 at 18:25:50.517 [brltty] kobject uevent property: RFKILL_STATE 1
2016-07-05 at 18:25:50.517 [brltty] kobject uevent property: RFKILL_TYPE bluetooth
2016-07-05 at 18:25:50.517 [brltty] kobject uevent property: SEQNUM 1093
2016-07-05 at 18:25:50.517 [brltty] kobject uevent property: SUBSYSTEM rfkill
2016-07-05 at 18:25:50.517 [brltty] kobject uevent property: SYSTEMD_WANTS systemd-rfkill at rfkill1.service
2016-07-05 at 18:25:50.517 [brltty] kobject uevent property: TAGS :systemd:
2016-07-05 at 18:25:50.517 [brltty] kobject uevent property: USEC_INITIALIZED 4685431
2016-07-05 at 18:25:50.654 [brltty] kobject uevent action: add /module/bnep
2016-07-05 at 18:25:50.655 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.655 [brltty] kobject uevent property: DEVPATH /module/bnep
2016-07-05 at 18:25:50.655 [brltty] kobject uevent property: SUBSYSTEM module
2016-07-05 at 18:25:50.655 [brltty] kobject uevent property: SEQNUM 1094
2016-07-05 at 18:25:50.655 [brltty] kobject uevent data: libudev: FE ED CA FE 28 00 00 00 28 00 00 00 56 00 00 00 38 E3 A3 0F 00 00 00 00 00 00 00 00 00 00 00 00
2016-07-05 at 18:25:50.655 [brltty] kobject uevent property: ACTION add
2016-07-05 at 18:25:50.655 [brltty] kobject uevent property: DEVPATH /module/bnep
2016-07-05 at 18:25:50.655 [brltty] kobject uevent property: SEQNUM 1094
2016-07-05 at 18:25:50.655 [brltty] kobject uevent property: SUBSYSTEM module
2016-07-05 at 18:25:50.655 [brltty] kobject uevent property: USEC_INITIALIZED 4857509
2016-07-05 at 18:25:51.387 [tune-thread] beeper disabled
2016-07-05 at 18:25:55.602 [brltty] program exit event added: command-queue
2016-07-05 at 18:25:55.603 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:25:55.603 [brltty] popped command handler: message
2016-07-05 at 18:25:55.603 [brltty] popped command environment: message
2016-07-05 at 18:25:55.603 [brltty] report listener registered: 0: brlapi_handleReports
2016-07-05 at 18:25:55.603 [brltty] control[console] error 5: Input/output error.
2016-07-05 at 18:25:55.603 [brltty] device opened: /dev/tty1: fd=27
2016-07-05 at 18:25:55.763 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:25:57.235 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:25:59.059 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:25:59.315 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:25:59.603 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:25:59.604 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:25:59.891 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:25:59.892 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:00.147 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:00.148 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:00.403 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:00.404 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:00.595 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:00.596 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:00.915 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:00.916 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:01.139 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:01.140 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:01.363 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:01.364 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:01.715 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:01.716 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:01.939 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:01.940 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:26:02.164 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:24.185 [brltty] input packet: 02 00 08 4B 43 00 08 00 00 03
2016-07-05 at 18:28:24.185 [brltty] brl key press: LeftJoystickLeft (Ctx:2 Grp:2 Num:19) -> NOOP (Cmd:000000)
2016-07-05 at 18:28:24.185 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:24.377 [brltty] input packet: 02 00 08 4B 43 00 00 00 00 03
2016-07-05 at 18:28:24.377 [brltty] brl key release: LeftJoystickLeft (Ctx:2 Grp:2 Num:19) -> PRPROMPT (Cmd:00000F)
2016-07-05 at 18:28:24.377 [brltty] command: 00000F (PRPROMPT: go up to previous command prompt)
2016-07-05 at 18:28:24.377 [tune-thread] beeper enabled
2016-07-05 at 18:28:24.377 [tune-thread] tone: MSecs:6 Freq:2349
2016-07-05 at 18:28:24.383 [tune-thread] tone: MSecs:6 Freq:1174
2016-07-05 at 18:28:24.390 [tune-thread] tone: MSecs:6 Freq:587
2016-07-05 at 18:28:24.396 [tune-thread] tone: MSecs:6 Freq:293
2016-07-05 at 18:28:24.402 [tune-thread] tone: MSecs:10 Freq:146
2016-07-05 at 18:28:26.169 [brltty] input packet: 02 00 08 4B 43 00 04 00 00 03
2016-07-05 at 18:28:26.169 [brltty] brl key press: LeftJoystickRight (Ctx:2 Grp:2 Num:18) -> NOOP (Cmd:000000)
2016-07-05 at 18:28:26.169 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:26.403 [tune-thread] beeper disabled
2016-07-05 at 18:28:26.425 [brltty] input packet: 02 00 08 4B 43 00 00 00 00 03
2016-07-05 at 18:28:26.425 [brltty] brl key release: LeftJoystickRight (Ctx:2 Grp:2 Num:18) -> NXPROMPT (Cmd:000010)
2016-07-05 at 18:28:26.425 [brltty] command: 000010 (NXPROMPT: go down to next command prompt)
2016-07-05 at 18:28:26.425 [tune-thread] beeper enabled
2016-07-05 at 18:28:26.425 [tune-thread] tone: MSecs:6 Freq:2349
2016-07-05 at 18:28:26.431 [tune-thread] tone: MSecs:6 Freq:1174
2016-07-05 at 18:28:26.437 [tune-thread] tone: MSecs:6 Freq:587
2016-07-05 at 18:28:26.444 [tune-thread] tone: MSecs:6 Freq:293
2016-07-05 at 18:28:26.450 [tune-thread] tone: MSecs:10 Freq:146
2016-07-05 at 18:28:27.769 [brltty] input packet: 02 00 08 4B 43 00 01 00 00 03
2016-07-05 at 18:28:27.769 [brltty] brl key press: LeftJoystickUp (Ctx:2 Grp:2 Num:16) -> NOOP (Cmd:000000)
2016-07-05 at 18:28:27.769 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:28.025 [brltty] input packet: 02 00 08 4B 43 00 00 00 00 03
2016-07-05 at 18:28:28.025 [brltty] brl key release: LeftJoystickUp (Ctx:2 Grp:2 Num:16) -> TOP_LEFT (Cmd:00000B)
2016-07-05 at 18:28:28.025 [brltty] command: 00000B (TOP_LEFT: go to beginning of top line)
2016-07-05 at 18:28:28.449 [tune-thread] beeper disabled
2016-07-05 at 18:28:29.839 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:29.849 [brltty] input packet: 02 00 08 4B 43 00 00 00 00 03
2016-07-05 at 18:28:33.392 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:33.594 [brltty] input packet: 02 00 08 4B 43 00 00 00 00 03
2016-07-05 at 18:28:40.187 [brltty] input packet: 02 00 08 4B 43 00 00 00 01 03
2016-07-05 at 18:28:40.187 [brltty] brl key press: L1 (Ctx:2 Grp:2 Num:0) -> NOOP (Cmd:000000)
2016-07-05 at 18:28:40.187 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:40.379 [brltty] input packet: 02 00 08 4B 43 00 00 00 00 03
2016-07-05 at 18:28:40.379 [brltty] brl key release: L1 (Ctx:2 Grp:2 Num:0)
2016-07-05 at 18:28:41.499 [brltty] input packet: 02 00 08 4B 43 00 00 00 80 03
2016-07-05 at 18:28:41.499 [brltty] brl key press: L5 (Ctx:2 Grp:2 Num:7) -> NOOP (Cmd:000000)
2016-07-05 at 18:28:41.499 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:41.691 [brltty] input packet: 02 00 08 4B 43 00 00 00 00 03
2016-07-05 at 18:28:41.691 [brltty] brl key release: L5 (Ctx:2 Grp:2 Num:7)
2016-07-05 at 18:28:44.369 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:44.370 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:44.379 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:46.033 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:46.034 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:46.034 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:47.474 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:47.474 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:47.474 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:48.786 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:48.786 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:48.786 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:49.874 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:49.874 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:28:49.875 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:12.085 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:12.277 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:12.437 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:12.629 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:12.789 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:17.429 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:17.685 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:17.781 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:18.037 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:19.093 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:19.285 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:19.445 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:19.637 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:19.765 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:20.021 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:20.277 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:20.566 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:20.886 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:21.046 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:21.174 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:22.294 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:22.486 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:22.678 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:22.934 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:23.094 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:23.318 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:23.670 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:23.670 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:23.830 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:24.182 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:24.438 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:25.238 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:25.430 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:27.574 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:27.830 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:28.791 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:28.919 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:29.143 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:29.271 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:29.495 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:29.591 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:29.783 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:29.975 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:30.135 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:30.327 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:30.487 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:30.743 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:30.967 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:33.079 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:33.239 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:34.295 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:34.519 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:35.127 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:37.784 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:37.976 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:38.168 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:38.488 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:39.896 [brltty] command: 000000 (NOOP: do nothing)
2016-07-05 at 18:29:41.016 [brltty] command: 000000 (NOOP: do nothing)